Maverick MK1 HYBRID User Manual

Page 1

User Manual

Page 2

Edition Notes

The Maverick MK1 Hybrid User Manual Rev. 1 covers the description, safety precautions, released this edition of the Maverick MK1 Hybrid User Manual in 2016.

Trademarks

CHAUVET, the Chauvet logo and Maverick MK1 Hybrid are registered trademarks or

. (d/b/a Chauvet a nd Chauv et Ligh ting) in t he Unite d States and other countries. Other company and produc t names and logos referr ed to herein may be trademarks of their respective companies.

The works of authors hip contained in this manual, includi ng, but not limited to, all design, t ext

Electronically published by Chauvet in the United States of America.

Manual Use

Chauvet authorizes it s c us tomers to download and pr i nt th is manual for profess ional inf or mation purposes only. Chauv et expressly pr ohibits the usa ge, copy, storage, distribution , modification,

is manual or its content for any other purpose without written consent from

Chauvet.

Document

Printing

For better results, pr int this docum ent in c olor, on lett er size pap er (8.5 x 11 i n), d ouble-sided. If

Intended

Any person in charge of ins talling, operatin g, and/or m aintaining this product s hould com pletely read through the guide tha t shipped with the product, as well as this manual, before install ing, operating, or maintaining this product.

Disclaimer

Chauvet believes that the information contained in this manual is accurate in all respects. any party for any loss, damage or disruption caused by any errors or omissions in this

document, whether such errors or omissions result from negligence, accident or any other

and does not commit to make, any such revisions.

Document

Revision

The Maverick MK1 Hybrid User Manual Rev. 1 is the current edition of this manual. Go to

Edition Notes

Audience

installation, programming, operation, and m aintenance of the Maverick MK1 Hybrid. Chauvet

trademarks of Chauvet & Sons, LLC

and images are owned by Chauvet.

or printing of th

using A4 paper (210 x 297 mm), configure your printer to scale the content accordingly.

However, Chauvet assum es no responsibility and specifically discla ims any and all liabilit y to

cause. Chauvet res erves the ri ght to re vise the c ontent of this docum ent without an y obligatio n to notify any pers on or c ompany of such r e visi on, ho wever , Ch au vet has no obligation to make,

www.chauvetprofessional.com for the latest version.

Maverick MK1 Hybrid User Manual Rev. 2

Page 3

Table of Contents

1. Before You Begin .......................................................................................................................... 1

What Is Included ........................................................................................................................................... 1

Claims .............................................................................................................................................................................. 1

Manual Conventions ..................................................................................................................................... 1

Symbols ........................................................................................................................................................ 1

Product At A Glance ..................................................................................................................................... 1

Safety Notes ................................................................................................................................................. 2

2. Introduction ................................................................................................................................... 3

Description .................................................................................................................................................... 3

Features ....................................................................................................................................................... 3

Overview ....................................................................................................................................................... 3

Dimensions ................................................................................................................................................... 4

3. Setup .............................................................................................................................................. 5

AC Power ..................................................................................................................................................... 5

AC Plug ........................................................................................................................................................................... 5

Fuse Replacement .......................................................................................................................................................... 5

Mounting ....................................................................................................................................................... 6

Orientation ....................................................................................................................................................................... 6

Signal Connections ....................................................................................................................................... 7

Art-Net™ Connection ...................................................................................................................................................... 7

sACN Connection ............................................................................................................................................................ 7

4. Operation ....................................................................................................................................... 8

Touchscreen Control Panel ........................................................................................................................... 8

Control Panel Description ................................................................................................................................................ 8

Menu Map ..................................................................................................................................................... 8

Operating Settings Configuration ................................................................................................................ 12

Start Address ................................................................................................................................................................................ 12

Network Setup ............................................................................................................................................................... 12

Personality ..................................................................................................................................................................... 14

Settings .......................................................................................................................................................................... 14

Test Mode...................................................................................................................................................................... 18

System Information ....................................................................................................................................................... 18

Offset Mode ................................................................................................................................................ 19

DMX Values ................................................................................................................................................ 21

Gobo Designs – Rotating and Static Wheels ............................................................................................... 27

Color Wheels .............................................................................................................................................. 28

6. Technical Information ................................................................................................................. 29

Error Indication ........................................................................................................................................... 29

Operating Settings Configuration ................................................................................................................ 30

Home Screen ................................................................................................................................................................ 30

Test Mode...................................................................................................................................................................... 30

Auto Test....................................................................................................................................................................................... 30

Manual Test .................................................................................................................................................................................. 30

Setup ............................................................................................................................................................................. 30

Network Settings ........................................................................................................................................................................... 30

Ethernet To DMX ............................................................................................................................................................................................. 30

IP Mode ........................................................................................................................................................................................................... 31

IP Address ....................................................................................................................................................................................................... 31

Subnet Mask ................................................................................................................................................................................................... 31

Pan/Tilt Orientation ....................................................................................................................................................................... 32

Zoom Orientation .......................................................................................................................................................................... 32

Maverick MK1 Hybrid User Manual Rev. 2 -i-

Page 4

Table of Contents

Display Orientation ........................................................................................................................................................................ 32

Pan/Tilt Angle Range .................................................................................................................................................................... 32

Blackout on Pan/Tilt Movement .................................................................................................................................................... 32

Touchscreen Calibration ............................................................................................................................................................... 32

Touchscreen Lock ......................................................................................................................................................................... 33

Lock Screen .................................................................................................................................................................................. 33

Swap Pan and Tilt ......................................................................................................................................................................... 33

Pan/Tilt Speed .............................................................................................................................................................................. 33

WDMX Reset ................................................................................................................................................................................ 33

Backlight Timer ............................................................................................................................................................................. 34

Loss of Data .................................................................................................................................................................................. 34

Fan Speed .................................................................................................................................................................................... 34

Dimmer Curve ............................................................................................................................................................................... 34

Dimmer Speed .............................................................................................................................................................................. 34

Reset Functions ............................................................................................................................................................................ 35

Factory Reset ................................................................................................................................................................................ 35

System Information ....................................................................................................................................................... 35

Offset Mode ................................................................................................................................................ 36

5. Firmware Update ......................................................................................................................... 37

6. Technical Information ................................................................................................................. 40

Product Maintenance .................................................................................................................................. 40

7. Technical Specifications ............................................................................................................ 40

Returns ............................................................................................................................................ 42

Contact Us ....................................................................................................................................... 43

-ii- Maverick MK1 Hybrid User Manual Rev. 2

Page 5

1. BEFORE YOU BEGIN

What Is

• Maverick MK1 Hybrid

• 2 Omega brackets with mounting hardware

• Warranty card

Claims

Carefully unpack the pr oduct immediately and check the box to make sure all the parts are in If the box or the contents (the product and included accessories) appear damaged from

. Failure to

report damage to the c arrier immediately may inval idate your claim. In addition, keep the box For other issues, such as missing components or parts, damage not related to shipping, or

concealed damage, file a claim with Chauvet within 7 days of delivery.

Manual

Convention

Meaning

1–512

A range of values in the text

50/60

A set of mutually exclusive values in the text

<SET>

A button on the product’s control panel

Settings

A product function or a menu option

A unique value to be entered or selected in a menu

Symbols

Meaning

Critical installation, configuration, or operation information. Failure to damage third-party equipment, or cause harm to the operator.

The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data transmission protocol.

Product At A

Before You Begin

Included

Conventions

• Seetronic Powerkon power cord

the package and are in good condition. shipping or show signs of mishandling, notify the carr ier immediately, not Chauvet and contents for inspection.

comply with this information may cause the product not to work,

Important installation or configuration information. Failure to comply with this information may keep the product from working.

• Quick Reference Guide

Useful information.

Use on Dimmer

Glance

Outdoor Use Master/Slave DMX

Auto Programs Auto-Ranging Power Supply Replaceable Fuse User-Serviceable

Maverick MK1 Hybrid User Manual Rev. 2 -1-

Page 6

Safety Notes

Read all the following Safety Notes before working with this product. These notes include important information about the installation, usage, and maintenance of this product.

This product contains no user-serviceable parts. Any reference t o servicin g in this User housing or attempt any repairs.

Personal Safety

• Avoid direct eye exposure to the light source while the product is on.

• Do not touch this product’s housing during operation because it may be very hot.

Mounting And

• This product is not intended for permanent installation.

• Never carry the product by the power cord or any moving part.

Power And Wiring

• Make sure the power cord is not crimped or damaged.

• Never disconnect this product by pulling or tugging on the power cable.

Operation

• Do not operate this product if you see damage on the housing, lenses, or cables. Have the

• In case of a serious operating problem, stop using this product immediately!

Before You Begin

Manual will only apply to properly trained Chauvet certified technicians. Do not open the

All applicable local codes and regulations apply to proper installation of this product.

• Always disconnect this product from its power source before servicing.

• Always connect this product to a grounded circuit to avoid the risk of electrocution.

Rigging

• This product is for indoor use only! To prevent risk of fire or shock, do not expose this product to rain or moisture. (IP20)

• CAUTION: When transferring product from extreme temperature environments, (e.g., cold truck to warm humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow product to fully acclimate to the surrounding environment before connecting it to power.

• Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.

• Make sure there are no flammable materials close to this product while it is operating.

• When hanging this product, always secure to a fastening device using a safety cable.

• Always make sure you are connecting this product to the proper voltage in accordance

with the specifications in this manual or on the product’s specification label.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.

• Never connect this product to a dimmer pack or rheostat.

• Make sure to replace the fuse with another of the same type and rating.

damaged parts replaced by an authorized technician at once.

• Do not cover the ventilation slots when operating to avoid internal overheating.

• The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at a

higher temperature.

If your Chauvet product requires service, contact Chauvet Technical Support.

-2- Maverick MK1 Hybrid User Manual Rev. 2

Page 7

2. INTRODUCTION

Description

Maverick MK1 Hybrid puts a world of options at your f inger tips with advanced optics,

18º zoom r ange

41º in wash mode, and a robust CMY color system.

W Osram Sirius reflector lamp, this supercharged hybrid awaits

sACN, Art-Net, or W-DMX for control.

Features

• Fully featured, high powered Spot/Beam combination fixture with CMY color mixing and

• Battery backup touchscreen display with auto rotate depending on fixture orientation

Rear Panel

Touchscreen

Display

Buttons

Antenna

Yoke

Handle

(x2)

Rubber Foot

(x4)

Amphenol XLRnet

Through Ports

3-pin DMX

In/Out

5-pin DMX

In/Out

Seetronic

Powerkon In

Fuse-

Holder

Front View

overlapping 8 and 4-facet prism s, a versatile g obo package, a 3º – in spot mode and 19º – Powered by a 440 your command to dazzle with stunning output and effects. Choose from DMX

overlapping prisms

• Fast and precise movement of Pan and Tilt functions

• Variable CMY color mixing and static colors to create a wide range of color options

• Individually controllable and overlappable 8 and 4-facet prisms

• Frost and beam flattening options for even light distribution

• Zoom angle of 3° to 18° in spot mode and 19° to 41°in wash mode for multiple coverage

options

• Tight 1° beam for extremely focused areal effects

• 6 rotating and 18 static gobos for massive visual impact

• DMX , WDMX, sACN, and Art-Net for full flexibility of control options

• True 1 compatible power input

Introduction

Overview

Maverick MK1 Hybrid User Manual Rev. 2 -3-

Power Switch

Page 8

15.51 in 394 mm

14.61 in 371 mm

14.69 in 373 mm

24.76 in 629 mm

16.48 in

418.5 mm

4.61 in

117 mm

12.1 in

307 mm

11.26 in 286 mm

Introduction

Dimensions

-4- Maverick MK1 Hybrid User Manual Rev. 2

Page 9

3. SETUP

AC Power

Each Maverick MK1 Hybrid has an auto-ranging po wer supply that w orks with an input voltage

Maverick

Technical

The listed current r ati ng in d icat es t he maximum curr ent dr a w dur ing nor mal operation. For more

www.chauvetprofessional.com.

• Always connect this product to a protected circuit with an appropriate electrical

completely disconnect the product from power via breaker or by unplugging it.

AC Plug

The Maverick MK1 Hybrid comes with a power in put c ord ter minated with a Seetronic Power kon connector on one end and an Edison plug on the other end (U.S. mark et). If the power input cord that came with your product has no plug, or if you nee d to c h ang e th e Edis o n plu g, use the table below to wire the new plug.

Connection

Wire (U.S.)

Wire (Europe)

Screw Color

AC Live

Black

Brown

Yellow or Brass

AC Neutral

White

Blue

Silver

AC Ground

Green/Yellow

Green

Fuse

Disconnect this product from the power outlet.

Screw the fuse holder cap back in place and reconnect power.

Make sure to disconnect the product’s power cord before replacing a blown fuse. Always replace the blown fuse with another of the sa me type an d ra ting.

Setup

range of 100 to 240 VAC, 50/60 Hz. To determ ine the power requirements for each MK1 Hybrid, refer to the label affixed to the product. You can also refer to the Specifications chart in this manual.

information, you may download Sizing Circuit Breakers from the Chauvet website

ground to avoid the risk of electrocution or fire.

• Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if

the rheostat or dimmer channel serves only as a 0 to 100% switch.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use

Replacement

Using a flat-head screwdriver, unscrew the fuse holder cap from the housing. 2. Remove the blown fuse and replace with another fuse of the same type and rating 3.

(F 10 A, 250 V).

Maverick MK1 Hybrid User Manual Rev. 2 -5-

Page 10

Mounting

Before mounting this product, read and follow the Safety Notes. For our CHAUVET Professional line of mounting clamps, go to http://trusst.com/products/.

Orientation

Always mount this product in a safe position and make sure there is adequate room for

be suspended upright or upside do wn using the 2 Om ega brackets includ ed, or it can be pl aced on its rubber feet on a flat level surface.

Chauvet recommends using the following general guidelines when mounting this product:

• When selecting an installation location, consider easy access to this product for operation,

anybody. Leave enough slack on the cabled to prevent tension and pulling on the plugs.

Mounting Diagram

Overhead Mounting

Floor Mounting

Rubber Feet (x4)

Mounting Clamp

Omega Bracket

Setup

ventilation, configuration, and maintenance. The Maverick MK1 Hybrid should

programming adjustments, and routine maintenance.

• The product is not intended for permanent installation.

• Make sure to mount this product away from any flammable material as indicated in the

Safety Notes.

• Never mount in places where rain, high humidity, extreme temperature changes, or restricted ventilation may affect the product.

• If hanging this product, make sure that the mounting location can support the product’s weight. See the T echnic al Specif icat io ns for the weight-bearing requirements of this product.

• When hanging this product, always secure to a fastening device using a safety cable. For our CHAUVET Professional line of safety cables, go to http://trusst.com/products/.

• When mounting the product on the floor, make sure that the product and cables are away from people and vehicles.

• Place the Maverick MK1 Hybrid so that it can move freely without hitting anything or

DO NOT side mount this fixture.

-6- Maverick MK1 Hybrid User Manual Rev. 2

Page 11

Setup

Signal Connections

The Maverick MK1 H ybrid can receive DMX, WDMX, Art-Net™, or sACN signal. T he Maverick

http://www.chauvetlighting.com/downloads/DMX_Primer_Rev9_ML_WO.pdf

Art-Net™

Art-Net™ is an Ethern et protocol t hat uses T CP/IP which transfers a large am ount of DMX512

Art-Net™ designed by and copyright Artistic Licence Holdings Ltd.

sACN

Also known as ANSI E1.31, str eaming ACN is an Et hernet protoc ol that uses th e layering and ACN compatible network. ACN is maintained by the Professional Lighting and Sound

Association (PLASA).

The three LED indicators in between the Amphenol XLRnet ports indicate a connection to a Maverick MK1 Hybrid is receiving a signal from a controller.

Switch or Router

Maverick

MK2 Wash

MK1 Hybrid has 2 N eutr ik® ether CON ® thro ugh ports , and 3- and 5-pin DMX in a nd out ports. For more information about DMX, read the DMX primer at:

Connection

data using an Neutrik® etherCON® RJ45 connection over a large network. An Art-Net™ protocol document is available from www.chauvetprofessional.com.

formatting of Architectur e for Control Net works to tr ansport DMX512 data over IP or any other

(such as the NET-Switch

from CHAUVET Professional)

Connection

Diagram

Computer/Controller

(running Art-Net™ or,

sACN protocol)

To other Art-Net™, or

sACN Devices

network and activity on that network. They do not indicate whether or not the

Maverick MK1 Hybrid User Manual Rev. 2 -7-

Page 12

Touchscreen

Control Panel

The Maverick MK1 Hybrid has a touchscreen dis play as well as 6 control buttons. Navigate the

g the images of the buttons on the sides of the

The touchscreen can be

and

Touchscreen Lock)

Control Panel

Description

Button

Function

(<UP>)

(<MENU>)

(<DOWN>)

(<LEFT>)

(<ENTER>)

Enables the currently displayed menu or sets the currently selected value

(<RIGHT>)

Menu Map

Main Level

Programming Levels

Description

Address

000-512

Network Settings

YES

Manual

DHCP

Static

Universe

0 ~ 255

Set the Universe

ArtNetIP

002.243.075.222

IP setting

SubMask

255.000.000.000

Subnet Mask

YES

DMX

WDMX

ArtNet

sACN

YES

< >

Operation

4. OPERATION

menu structure b y pressing the buttons, touchin display, or touching the desired menu option on the display directly. locked and calibra ted through the Setup opt ions in the m enu. (see Touchscreen Calibration

Ethernet to DMX

Navigates upwards through the menu list or increases the numeric value when in a function

Exits from the current menu or function

Navigates downwards through the menu list or decreases the numeric value when in a function

Navigates leftwards through the menu list

into the selected function

Navigates rightwards through the menu list

Turn on Art-Net to DMX capability

Art-Net Setup

Personality

Settings

-8- Maverick MK1 Hybrid User Manual Rev. 2

IP Mode

DMX 27CH

DMX 30CH

Control Mode

Pan Reverse

Tilt Reverse

Selection of IP mode

Choose 27 channels of DMX

Choose 30 channels of DMX

Signal Selection

Reverse the Pan

Reverse the tilt

Page 13

Operation

Main Level

Programming Levels

Description

YES

AUTO

540

360

180

270

180

YES

Fast

Slow

YES

30S

HOLD

Auto

Full

ECO

OFF

State/

Power On

OFF

YES

On if DMX

YES

Off if DMX

Off

YES

Ignition

Delay

Low Power

Delay

Reset Lamp

Reset the remaining lamp time

Screen Reverse

Pan Angle

Tilt Angle

BL. O. P/T Move

BL. O. Color Move

BL. O. Gobo Move

Calibration

Touchscreen Lock

Swap X/Y

X/Y Mode

WDMX Reset

Manually or automatically reverse the screen

Change the Pan angle

Change the tilt angle

Enable/disable XY blackout

Enable/disable color blackout

Enable/disable gobo blackout

Turn on calibration

Lock the touchscreen

Swap the pan and tilt

Pan and tilt speed

Reset the wireless DMX

Backlight Timer

Loss of Data

Fans

Safety Beam

Lamp Setting

On/Off

Off via DMX

10 ~ 255

0 ~ 255

Set the backlight to turn off automatically after a chosen time

Loss of data settings

Change the fan speed mode

Safety Beam mode

Lamp on or off

Lamp status shown when lamp is on

Control the lamp with DMX

Lamp On when DMX is on

Lamp off when DMX is off

set delay time for lamp ignition low power delay time

Maverick MK1 Hybrid User Manual Rev. 2 -9-

Page 14

Main Level

Programming Levels

Description

Time

YES

Interval

10 ~ 250

Lamp maintenance reminder set

Remain

Time

Pan/Tilt

Head

All

YES

Auto Test

Auto Test the product

Pan

0 ~ 255

Pan Fine

0 ~ 255

Tilt

0 ~ 255

Fine Tilt

0 ~ 255

P/T Speed

0 ~ 255

Cyan

0 ~ 255

Magenta

0 ~ 255

Yellow

0 ~ 255

Color1

0 ~ 255

Color2

0 ~ 255

Color3

0 ~ 255

Shutter

0 ~ 255

Dimmer

0 ~ 255

Dimmer Fine

0 ~ 255

Gobo

0 ~ 255

Animation

0 ~ 255

Animation

Rotate

Gobo

0 ~ 255

Gobo Rotate

0 ~ 255

Gobo Rotate

Fine

Prism

0 ~ 255

Prism1 Rotate

0 ~ 255

Prism2 Rotate

0 ~ 255

Frost

0 ~ 255

Zoom

0 ~ 255

Focus

0 ~ 255

Fine Focus

0 ~ 255

Beam Mode

0 ~ 255

Special Function

0 ~ 255

Ver V1

Current version

Running Mode DMX

Current mode

DMX Address 001

DMX Address

Temperature 025

Current temperature

Fixture Hours 00000

Current active hours

ArtNetIp 002.243.075.222

Current IP address

SubMask 255.000.000.000

Current Subnet Mask

MAC 00.04.a3.08.00.00

MAC address

Operation

Test

Special Set

Reset Function

Factory Settings

Manual Test

10 ~ 250

Yes/No

Remaining lamp time

Reset individual functions to factory

Reset all functions to factory

Individually test each function/channel

Information Fixture Information

0 ~ 255

-10- Maverick MK1 Hybrid User Manual Rev. 2

Page 15

Operation

Main Level

Programming Levels

Description

Base Fan1 Speed 2000rpm

View speed setting

Base Fan2 Speed 2000rpm

View speed setting

Head Fan1 Speed 2000rpm

View speed setting

Head Fan2 Speed 2000rpm

View speed setting

Error Information

_ _ _ _ _

Will appear on screen

Frequency

0Hz

Pan

0 ~ 255

Pan Fine

0 ~ 255

Tilt

0 ~ 255

Fine Tilt

0 ~ 255

P/T Speed

0 ~ 255

Cyan

0 ~ 255

Magenta

0 ~ 255

Yellow

0 ~ 255

Color1

0 ~ 255

Color2

0 ~ 255

Color3

0 ~ 255

Shutter

0 ~ 255

Dimmer

0 ~ 255

Dimmer Fine

0 ~ 255

Gobo

0 ~ 255

Animation

0 ~ 255

Animation

Rotate

Gobo

0 ~ 255

Gobo Rotate

0 ~ 255

Gobo Rotate

Fine

Prism

0 ~ 255

Prism1 Rotate

0 ~ 255

Prism2 Rotate

0 ~ 255

Frost

0 ~ 255

Zoom

0 ~ 255

Focus

0 ~ 255

Fine Focus

0 ~ 255

Beam Mode

0 ~ 255

Special

Function

Fan Information

Channel Information

Status of individual channel

0 ~ 255

Maverick MK1 Hybrid User Manual Rev. 2 -11-

Page 16

Operating Settings Configuration

Home Screen

The Maverick MK1 Hybrid has a home screen that shows the protocol mode, the IP address or DMX

To see the hom e screen, pr ess

<MENU> repeatedly until it appears on the display.

Start Address

To set the starting address, set the Control Mode and then f ollo w the instr uctions below:

Press <ENTER>.

Network Setup

Ethernet To DMX

The Maverick MK1 Hybrid can convert a single ethernet input signal to a single DMX output signal.

, or touch the display where

Press <ENTER>.

IP Mode

The IP address of t he Maverick MK1 Hybrid can be set m anually, by the network, or to a pre-set

, or touch the display where

Press <ENTER>.

Operation

address, the DMX per sonal ity, an d the c urrent pr oduct tem peratur e.

Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>. 1. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Address, or touch the display where it 2.

says Address. If using the buttons instead of the touchscreen, press <ENTER>. 3. Enter the starting address (001–512) with one of the following methods: 4.

• Type the address number using the number pad that shows on the touchscreen display. or

• Using the buttons (or the button icons on the sides of the display),

Use <LEFT> or <RIGHT> to select the digit to be altered. a. Use <UP> or <DOWN> to increase or decrease the number value of that digit. b. Repeat until the address is set as desired. c.

The universe of the TCP/IP protocol will be the universe of the DMX function.

To activate or deactivate the Ethernet to DMX function, do the following:

Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.

Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Art-Net Setup

it says Network Setup. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP> or <DOWN> to select Ethernet to DMX, or touch the display where it says Ethernet 4.

to DMX. If using the buttons instead of the touchscreen, press <ENTER>. 5. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (deactivate) or YES (activate), or 6.

touch the display where it says the desired setting.

static address specific to each product. To set the IP Mode, follow the instructions below:

Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.

Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Art-Net Setup

it says Network Setup. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP> or <DOWN> to select IP Mode, or touch the display where it says IP Mode. 4. If using the buttons instead of the touchscreen, press <ENTER>. 5. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from: 6.

• Manual (set the IP address with the control panel),

• DHCP (the network sets the IP address),

• Static (a pre-set address specific to each product),

or touch the display where it says the desired mode.

-12- Maverick MK1 Hybrid User Manual Rev. 2

Page 17

Operation

Subnet and

Universe

The Subnet and universe must be assigned through the product menu. To set the Subnet and

, or touch the display where

Press <ENTER>.

ArtNet IP Address

To set the IP address, do the following:

, or touch the display where

Press <ENTER>.

Subnet Mask

To set the Subnet Mask, do the following:

, or touch the display where

Press <ENTER>.

Universe do the following:

Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.

Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Art-Net Setup

it says Art-Net Setup. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP> or <DOWN> to select Universe, or touch the display where it says Universe. 4. If using the buttons instead of the touchscreen, press <ENTER>. 5. Enter the universe address (0–254 for ArtNet, 0–255 for sACN) with one of the following 6.

methods:

• Type the universe number using the number pad that shows on the touchscreen display. or

• Using the buttons (or the button icons on the sides of the display),

Use <LEFT> or <RIGHT> to select the digit to be altered. a. Use <UP> or <DOWN> to increase or decrease the number value of that digit. b. Repeat until the universe or subnet is set as desired. c.

7. Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>. 1.

Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Art-Net Setup

it says Art-Net Setup. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP> or <DOWN> to select ArtNetIP, or touch the display where it says ArtNetIP. 4. If using the buttons instead of the touchscreen, press <ENTER>. 5. Set the IP address (from 000.000.000.000 to 255.255.255.255) with one of the following 6.

methods:

• Through the touchscreen: Touch the display where it shows the byte (set of three numbers) to be changed. a. Use the number pad on the display to enter the desired number. b. Repeat until the IP address is set as desired. c.

• With the buttons: Use <LEFT> or <RIGHT> to select the byte (set of three numbers) to be changed). a. Use <UP> or <DOWN> to increase or decrease the value. b. Repeat until the IP address is set as desired. c.

Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>. 1.

Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Art-Net Setup

it says Art-Net Setup. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP> or <DOWN> to select SubMask, or touch the display where it says SubMask. 4. If using the buttons instead of the touchscreen, press <ENTER>. 5. Set the Subnet Mask (from 000.000.000.000 to 255.255.255.255) with one of the following 6.

methods.

• With the buttons: Use <LEFT> or <RIGHT> to select the byte (set of three numbers) to be changed). a. Use <UP> or <DOWN> to increase or decrease the value. b. Repeat until the Subnet Mask is set as desired. c.

In DHCP or Static IP Mode, the IP and SubMask menu settings have no effect on the product.

Maverick MK1 Hybrid User Manual Rev. 2 -13-

Page 18

Personality

To set which DMX personality to use, do the following:

(confirm) or touch the

Press <ENTER>.

Settings

To reach the Settings menu, follow the instructions below:

If using the buttons instead of the touchscreen, press <ENTER>.

Control Mode

The Maver ick MK1 H ybrid can be set to respon d to DMX, W DMX, Art -Net™ or sACN. The prot ocol

Press <ENTER>.

controller and the product. See WDMX Reset for troubleshooting information.

Pan/Tilt Orientation

To set whether the pan or tilt orientation is normal or inverted:”

Press <ENTER>.

Display Orientation

To set which way the display faces, do the following:

Press <ENTER>.

Operation

Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>. 1. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Personality, or touch the display where it 2.

says Personality. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select DMX 27CH or DMX 30CH, or touch the 4.

display where it says the desired option. If using the buttons instead of the touchscreen, press <ENTER>. 5.

Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (cancel) or YES

display where it says the desired option.

Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>. 1. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Settings, or touch the displa y where it 2.

says Settings.

configuration must be set for the product to respond correctly to the controller(s). See the Menu Map for more information. To configure the protocol for the Maverick MK1 Hybrid, follow the instructions below:

Navigate to the Settings menu. Use <UP> or <DOWN> to select Control Mode, or touch the display where it says Control 2.

Mode. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select DMX, WDMX, sACN, ArtNet., or touch 4.

the display where it says the desired option.

For WDMX control, ensure the antenna is raised and there are no obstructions between the

Navigate to the Settings menu. 1. Use <UP> or <DOWN> to select Pan Reverse or Tilt Reverse, or touch the display where it 2.

says the desired setting. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (normal orientation) or YES (inverted 4.

orientation), or touch the display where it says the desired option.

Navigate to the Settings menu. 1. Use <UP> or <DOWN> to select Screen Reverse, or touch the display where it says Screen 2.

Reverse. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (display is normal), YES (displa y is 4.

inverted), or AUTO (the display automatically detects which way the product is facing and

orients itself accordingly), or touch the display where it says the desired option.

-14- Maverick MK1 Hybrid User Manual Rev. 2

Page 19

Operation

Pan/Tilt Angle

Range

To set the range of motion the pan or tilt is permitted:

, or touch the display where it says the

Press <ENTER>.

Blackout on Pan/Tilt

Movement

To set whether the product will black out during pan or tilt movement, follow the instructions below:

BL. O. P/T

Press <ENTER>.

Blackout on Color

Movement

To set whether the product will black out during color movement, follow the instructions below:

Press <ENTER>.

Blackout on Gobo

Movement

To set whether the product will black out during gobo movement, follow the instructions below:

Press <ENTER>.

Touchscreen

Calibration

If the touchscreen is not responding correctly, it may need to be calibrated. To do so:

Follow the instructions, touching the points as they appear on the display.

Touchscreen Lock

To lock or unlock the touchscreen control panel, do the following:

Press <ENTER>.

Navigate to the Settings menu. 1.

Use <UP> or <DOWN> to select Pan Angle or Tilt Angle

desired setting. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select 540 (540°), 360 or 270 (360° or 270° for 4.

pan or tilt respectively), 180 (180°), or 90 (90°) or touch the display where it says the desired

option.

Navigate to the Settings menu. 1.

Use <UP> or <DOWN> to select BL. O. P/T Move, or touch the display where it says

Move. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not black out) or YES (black out 4.

during movement), or touch the display where it says the desired option.

Navigate to the Settings menu. 1. Use <UP> or <DOWN> to select BL. O. Color Move, or touch the display where it says BL. O. 2.

Color Move. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not black out) or YES (black out 4.

during movement), or touch the display where it says the desired option.

Navigate to the Settings menu. 1. Use <UP> or <DOWN> to select BL. O. Gobo Move, or touch the display where it says BL. O. 2.

Gobo Move. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not black out) or YES (black out 4.

during movement), or touch the display where it says the desired option.

Navigate to the Settings menu. 1. Use <UP> or <DOWN> to select Calibration, or touch the display where it says Calibration. 2. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not calibrate) or YES (calibrate), 4.

or touch the display where it says the desired option. Press <ENTER>. 5.

6. Navigate to the Settings menu. 1.

Use <UP> or <DOWN> to select Touchscreen Lock, or touch the display where it says 2.

Touchscreen Lock. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (display will respond to touch) or YES 4.

(display will not respond to touch), or touch the display on the desired option.

Maverick MK1 Hybrid User Manual Rev. 2 -15-

Page 20

Lock the Screen

To lock the touchscreen control panel and menu buttons, do the following:

Enter the passcode (0920) using the touc hs c reen or buttons .

Swap Pan and Tilt

To switch the pan and ti lt functions so that what normally controls the pan controls the tilt and what

Press <ENTER>.

Pan/Tilt Speed

To set the maximum speed of the pan and tilt:

Press <ENTER>.

WDMX Reset

To reset the WDMX connection from the Maverick MK1 Hybrid, do the following:

Press <ENTER>.

Backlight Timer

To set the amount of time after inactivity before the display backlight turns off:

Press <ENTER>.

Loss of Data

In case of an input si gnal bein g lost in an y way, the Maveric k MK1 H ybrid will respond in one of two

Press <ENTER>.

Operation

Navigate to the Settings menu. 1. Use <UP> or <DOWN> to select Lock Screen, or touch the display where it says Lock Screen. 2. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (display will respond to touch or 4.

buttons) or YES (display will not respond to touch or buttons), or touch the display where it says

the desired option. Press <ENTER>. 5.

To unlock the touchscreen and menu buttons, do the following:

Touch the display touchscreen anywhere or push any menu button. 6.

normally controls the tilt controls the pan, follow the instructions below:

Navigate to the Settings menu. Use <UP> or <DOWN> to select Swap XY, or touch the display where it says Swap XY. 2. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (normal pan and tilt) or YES (pan 4.

controls tilt, tilt controls pan), or touch the display where it says the desired option.

Navigate to the Settings menu. 1. Use <UP> or <DOWN> to select XY Mode, or touch the display where it says XY Mode. 2. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Slow or Fast, or touch the display where 4.

it says the desired option.

Navigate to the Settings menu. 1. Use <UP> or <DOWN> to select WDMX Reset, or touch the display where it says WDMX 2.

Reset. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not reset connection) or YES 4.

(reset the connection), or touch the display where it says the desired option.

Navigate to the Settings menu. 1. Use <UP> or <DOWN> to select Backlight Timer, or touch the display where it says Backlight 2.

Timer. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select 30S (after 30 seconds of inactivity), 1M 4.

(after 1 minute of inactivity), 5M (after 5 minutes of inactivity), or 30M (after 30 minutes of

inactivity), or touch the display where it says the desired option.

ways. The product will either hold the last signal received, or black out all LED output. To set which way the product responds, follow the instructions below:

Navigate to the Settings menu.

Use <UP> or <DOWN> to select Loss of Data, or touch the display where it says Loss of Data. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Hold (hold last signal received) or Close 4.

(black out all LED output), or touch the display where it says the desired option.

-16- Maverick MK1 Hybrid User Manual Rev. 2

Page 21

Operation

Fan Speed

To set the speed of the fans, do the following:

Press <ENTER>.

Dimmer Curve

To set the dimmer curve, follow the instructions below:

Press <ENTER>.

Dimmer Speed

To set the dimmer speed, do the following:

Press <ENTER>.

Reset Functions

To reset the pan, tilt, or all functions as if from startup:

Press <ENTER>.

Factory Reset

To restore the Maverick MK1 Hybrid to factory default settings, do the following:

Press <ENTER>.

Navigate to the Settings menu. 1. Use <UP> or <DOWN> to select Fans, or touch the display where it says Fans. 2. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Auto (fan speed set according to product 4.

temperature), Full (maximum speed), or ECO (quiet fans mode), or touch the display where it

says the desired option.

Navigate to the Settings menu. 1. Use <UP> or <DOWN> to select Dimmer Curv e, or touch the display where it says Dimmer 2.

Curve. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Linear, Square, I Squa, or SCurve, or 4.

touch the display where it says the desired option.

Navigate to the Settings menu. 1. Use <UP> or <DOWN> to select Dimmer Spe ed , or touch the display where it says Dimmer 2.

Speed. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Smooth or Fast, or touch the display 4.

where it says the desired option.

Navigate to the Settings menu. 1. Use <UP> or <DOWN> to select Reset Function, or touch the display where it says Reset 2.

Function. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP> or <DOWN> to select the function to reset, from Pan/Tilt, Iris/Prism, 4.

Color/CMY+CTO, Gobo/Gobo Rotate, Zoom/Frost/Focus or All, or touch the display where it

says the desired option. If using the buttons instead of the touchscreen, press <ENTER>. 5. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from NO (do not reset) or YES (reset), or 6.

touch the display where it says the desired option.

Navigate to the Settings menu. 1. Use <UP> or <DOWN> to select Factory Settings, or touch the display where it says Factory 2.

Settings. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not reset) or YES (reset to factory 4.

settings), or touch the display where it says the desired option.

Maverick MK1 Hybrid User Manual Rev. 2 -17-

Page 22

Test Mode

Auto Test

To perform an auto test of the Maverick MK1 Hybrid functions, follow the instructions below:

Press <ENTER>.

Manual Test

To test the functions of the product manually, do the following:

Press <ENTER>.

System Information

All information about the current status of the Maverick MK1 Hybrid is available through the

Use <UP> or <DOWN> to scroll through the information.

Operation

Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>. 1. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Test, or touch the display where it says 2.

Test. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP> or <DOWN> to select Auto test, or touch the display where it says Auto test. 4.

Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>. 1. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Test, or touch the display where it says 2.

Test. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP> or <DOWN> to select Manual test, or touch the display where it says Manual test. 4. If using the buttons instead of the touchscreen, press <ENTER>. 5. Use <UP> or <DOWN> to select the function to test, from Pan, Pan Fine, Tilt, Tilt Fine, P/S 6.

Speed, Dimmer, Dimmer Fine, Shutter, Virtual Shaking, Cyan, Magenta, Yellow, CTO,

Color, Gobo, Gobo Rotate, Gobo 2, Gobo 2 Rotate, Focus, Focus Fine, Focus Auto, Zoom,

Zoom Fine, Prism, Prism Rotate, Iris, Frost, CMY Macro, CMY Macro Speed, or Special

Function, or touch the display where it says the desired function.

If using the buttons instead of the touchscreen, press <ENTER>. 7. Change the value of the tested function with one of the following methods: 8.

• Type the desired value using the number pad that shows on the touchscreen display. or

• Use <UP>, <RIGHT>, <DOWN>, or <LEFT> to increase or decrease the value.

product’s Sys Info menu. To view this information, follow the instructions below:

Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Information, or touch the display where it 2.

says Information. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP> or <DOWN> to select from Fixture Information (shows firmware version, running 4.

mode, starting address, etc.), Fan Information (shows speed of the head fans in rpm), Error

Information (shows any errors or No E rror!), or Channel Information (shows the current value

of all signal input channels) or touch the display where it says the desired option. Press <ENTER>. 5.

-18- Maverick MK1 Hybrid User Manual Rev. 2

Page 23

Operation

Offset Mode

The Offset mode provides fine adjustments for the home position of all the moving parts in the optical path as well as the pan and tilt movements. This way, when in their home position, the

This brings you into the Zero Adjust menu screen.

PAN

1. Use <UP> or <DOWN> to select PAN.

4. Press <ENTER>.

TILT

1. Use <UP> or <DOWN> to select TILT.

4. Press <ENTER>.

COLOR

1. Use <UP> or <DOWN> to select COLOR.

4. Press <ENTER>.

GOBO

1. Use <UP> or <DOWN> to select GOBO.

4. Press <ENTER>.

GOBO ROTATE

1. Use <UP> or <DOWN> to select GOBO ROTATE.

4. Press <ENTER>.

GOBO 2

1. Use <UP> or <DOWN> to select GOBO 2.

4. Press <ENTER>.

GOBO 2 ROTATE

1. Use <UP> or <DOWN> to select GOBO 2 ROTATE.

4. Press <ENTER>.

FOCUS 1

1. Use <UP> or <DOWN> to select FOCUS 1.

4. Press <ENTER>.

FOCUS 2

1. Use <UP> or <DOWN> to select FOCUS 2.

4. Press <ENTER>.

FOCUS GOBO 2

1. Use <UP> or <DOWN> to select FOCUS GOBO 2.

4. Press <ENTER>.

moving parts do not show any border or reduce the light output.

1. Starting from the Main Level screen, press and hold <MENU> until the passcode screen appears.

2. Enter the passcode 2323 using one of the following methods:

• Through the touchscreen: use the number pad on the screen to enter 2323.

• With the buttons:

Use <DOWN> to select the number to be changed. a. Use <UP> to increas e the v alu e. b. Repeat until 2323 has been entered. c.

3. Press <ENTER>.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

Maverick MK1 Hybrid User Manual Rev. 2 -19-

Page 24

ZOOM

1. Use <UP> or <DOWN> to select ZOOM.

4. Press <ENTER>.

PRISM

1. Use <UP> or <DOWN> to select PRISM.

4. Press <ENTER>.

IRIS

1. Use <UP> or <DOWN> to select IRIS.

4. Press <ENTER>.

FROST

1. Use <UP> or <DOWN> to select FROST.

4. Press <ENTER>.

CYAN

1. Use <UP> or <DOWN> to select CYAN.

4. Press <ENTER>.

MAGENTA

1. Use <UP> or <DOWN> to select MAGENTA.

4. Press <ENTER>.

YELLOW

1. Use <UP> or <DOWN> to select YELLOW.

4. Press <ENTER>.

CTO

1. Use <UP> or <DOWN> to select CTO.

4. Press <ENTER>.

DIMMER

1. Use <UP> or <DOWN> to select DIMMER.

4. Press <ENTER>.

LED POWER

1. Use <UP> or <DOWN> to select LED POWER.

4. Press <ENTER>.

MAC4

1. Use <UP> or <DOWN> to select MAC4.

4. Press <ENTER>.

MAC5

1. Use <UP> or <DOWN> to select MAC5.

4. Press <ENTER>.

MAC6

1. Use <UP> or <DOWN> to select MAC6.

4. Press <ENTER>.

Operation

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

-20- Maverick MK1 Hybrid User Manual Rev. 2

Page 25

Operation

DMX Values

30CH

Channel

Function

Value

Percent/Settings

Pan

000ó255

0–100%

Fine Pan

000ó255

0–100%

Tilt

000ó255

0–100%

Fine Tilt

000ó255

0–100%

Pan/Tilt Speed

000ó255

0–100%

Dimmer

000ó255

0–100%

Fine Dimmer

000ó255

0–100%

000ó007

248ó255

Closed

Open

Cyan

000ó255

0–100%

Magenta

000ó255

0–100%

Yellow

000ó255

0–100%

000

255

Open

CTO 2500K

000

255

Open

Minus Green

000

255

Open

Pink

8 Shutter

12 Color Wheel 1

13 Color Wheel 2

008ó015 016ó131 132ó167 168ó203 204ó239 240ó247

028 050 080 100 129 150 181 200 235

Open Slow to fast Fast close, slow open Slow close, fast open Pulse effect from slow to fast Random effect from slow to fast

White + Beam Softener Beam Softener Beam Softener + Lavender Lavender Lavender + CTO 3200K CTO 3200K CTO 3200K + (UV) (UV) (UV) + CTO 2500K

White + Beam Softener Beam Softener Beam Softener + Dark Green Dark Green Dark Green + Dark Red Dark Red Dark Red + Dark Blue Dark Blue Dark Blue + Minus Green

Maverick MK1 Hybrid User Manual Rev. 2 -21-

028 050 080 100

14 Color Wheel 3

129 150 181 200 235

White + Beam Softener Beam Softener Beam Softener + Dark Orange Dark Orange Dark Orange + Light Orange Light Orange Light Orange + Light Green Light Green Light Green + Pink

Page 26

Channel

Function

Value

Percent/Settings

000

251ó255

Open

Gobo 18 Shaking

000ó018

235ó255

White

Gobo 6 Shaking

Operation

004 008 012 016 019 023 027 031 035 038 042 046

Gobo Wheel 1 (Static) [Gobo Designs]

050 054 057 061 065

069 070ó113 114ó117 118ó159 160ó165 166ó170 171ó175 176ó181 182ó186 187ó191 192ó197 198ó202 203ó207 208ó214 215ó218 219ó223 224ó229 230ó234 235ó239 240ó245 246ó250

Gobo 1 (Full Aperture) Gobo 2 (Aperture 1/3) Gobo 3 (Aperture 1/2) Gobo 4 (Aperture 2/3) Gobo 5 (Aperture 5/6) Gobo 6 (Triangle dots) Gobo 7 (Curvy triangle) Gobo 8 (Random dots) Gobo 9 (Symmetric dots) Gobo 10 (Line) Gobo 11 (Laser Circle) Gobo 12 (Square Lines) Gobo 13 (Brick Out) Gobo 14 (Triangle square) Gobo 15 (Shades) Gobo 16 (Crunch Bar) Gobo 17 (5 Wave) Gobo 18 (Burst) Clockwise gobo scroll, fast to slow stop Counter-clockwise gobo scroll, slow to fast Gobo 1 Shaking Gobo 2 Shaking Gobo 3 Shaking Gobo 4 Shaking Gobo 5 Shaking Gobo 6 Shaking Gobo 7 Shaking Gobo 8 Shaking Gobo 9 Shaking Gobo 10 Shaking Gobo 11 Shaking Gobo 12 Shaking Gobo 13 Shaking Gobo 14 Shaking Gobo 15 Shaking Gobo 16 Shaking Gobo 17 Shaking

-22- Maverick MK1 Hybrid User Manual Rev. 2

Gobo Wheel 2 (Rotating) [Gobo Designs]

019ó037 038ó056 057ó074 075ó092 093ó111 112ó129 130ó150 151ó171 172ó192 193ó213 214ó234

Gobo 1 (Half Moon and Sun) Gobo 2 (Broken Triangle) Gobo 3 (Star Field) Gobo 4 (Radial Star) Gobo 5 (Wavy Breakup) Gobo 6 (Turning Forks) Gobo 1 Shaking Gobo 2 Shaking Gobo 3 Shaking Gobo 4 Shaking Gobo 5 Shaking

Page 27

Operation

Channel

Function

Value

Percent/Settings

000ó021

193ó255

0-90 position

Counter-clockwise rotating, slow to fast

Gobo Wheel 2 Index Fine

000ó255

16-bit adjustable, 0–100%

Animation Wheel

000ó255

Effect wheel

000ó124 131ó255

Clockwise rotating, fast to slow Counter-clockwise rotating, slow to fast

000ó004 005ó255

No Function Prism Effect

000ó127

194ó255

Rotating position

Counter-clockwise rotating, fast to slow

000ó004 005ó255

No Function Prism Effect

000ó127

194ó255

Rotating position

Counter-clockwise rotating, fast to slow

Frost

000ó255

0–100%

Zoom

000ó255

0–100%

Focus

000ó255

0–100%

Fine Focus

000ó255

0–100%

000ó010 011ó255

No Function Beam Mode

000ó029

251ó255

No function

17 Gobo Wheel 2 Rotation

20 Animation Wheel Rotation

21 Prism 1

22 Prism 1 Rotation

23 Prism 2

24 Prism 2 Rotation

022ó042 043ó063 064ó084 085ó105 106ó127 128ó190 191ó192

125ó130

128ó189 190ó193

90-180 position 180-270 position 270-360 position 360-450 position 450-540 position Clockwise rotating, slow to fast Stop

Stop

Clockwise rotating, slow to fast Stop

29 Beam Mode

30 Control

Maverick MK1 Hybrid User Manual Rev. 2 -23-

030ó039 040ó049 050ó059 060ó069 070ó079 080ó089 090ó099 100ó109 110ó119 120ó129 130ó139 140ó149 150ó159 160ó169 170ó179 180ó189 190ó199 200ó209 210ó219 220ó229 230ó239 240ó245 246ó250

XY swap on XY swap off Zoom/auto focus mode on Zoom/auto focus mode off XY blackout enable XY blackout disable Color blackout enable Color blackout disable Gobo blackout enable Gobo blackout disable Lamp On XY reset Head reset Auto soft filter on Auto soft filter off No function No function All reset All blackout enable All blackout disable Lamp Off No function No function

Page 28

27CH

Channel

Function

Value

Percent/Settings

Pan

000ó255

0–100%

Fine Pan

000ó255

0–100%

Tilt

000ó255

0–100%

Fine Tilt

000ó255

0–100%

Pan/Tilt Speed

000ó255

0–100%

Dimmer

000ó255

0–100%

000ó007

248ó255

Closed

Open

Cyan

000ó255

0–100%

Magenta

000ó255

0–100%

Yellow

000ó255

0–100%

000

255

Open

CTO 2500K

000

255

Open

Minus Green

000

255

Open

Pink

Operation

7 Shutter

11 Color Wheel 1

12 Color Wheel 2

008ó015 016ó131 132ó167 168ó203 204ó239 240ó247

028

050

080

100

129

150

181

200

235

028

050

080

100

129

150

181

200

235

Open Slow to fast Fast close, slow open Slow close, fast open Pulse effect from slow to fast Random effect from slow to fast

White + Beam Softener Beam Softener Beam Softener + Lavender Lavender Lavender + CTO 3200K CTO 3200K CTO 3200K + (UV) (UV) (UV) + CTO 2500K

White + Beam Softener Beam Softener Beam Softener + Dark Green Dark Green Dark Green + Dark Red Dark Red Dark Red + Dark Blue Dark Blue Dark Blue + Minus Green

-24- Maverick MK1 Hybrid User Manual Rev. 2

13 Color Wheel 3

028

050

080

100

129

150

181

200

235

White + Beam Softener Beam Softener Beam Softener + Dark Orange Dark Orange Dark Orange + Light Orange Light Orange Light Orange + Light Green Light Green Light Green + Pink

Page 29

Operation

Channel

Function

Value

Percent/Settings

000

251ó255

Open

Gobo 18 Shaking

000ó018

235ó255

White

Gobo 6 Shaking

004

008

012

016

019

023

027

031

035

038

042

046

Gobo Wheel 1 (Static) [Gobo Designs]

050

054

057

061

065

069 070ó113 114ó117 118ó159 160ó165 166ó170 171ó175 176ó181 182ó186 187ó191 192ó197 198ó202 203ó207 208ó214 215ó218 219ó223 224ó229 230ó234 235ó239 240ó245 246ó250

Maverick MK1 Hybrid User Manual Rev. 2 -25-

Gobo Wheel 2 (Rotating) [Gobo Designs]

019ó037 038ó056 057ó074 075ó092 093ó111 112ó129 130ó150 151ó171 172ó192 193ó213 214ó234

Page 30

Channel

Function

Value

Percent/Settings

000ó021

193ó255

0-90 position

Counter-clockwise rotating, slow to fast

Animation Wheel

000ó255

Effect wheel

000ó124 131ó255

Clockwise rotating, fast to slow Counter-clockwise rotating, slow to fast

000ó004 005ó255

No Function Prism Effect

000ó127

194ó255

Rotating position

Counter-clockwise rotating, fast to slow

000ó004 005ó255

No Function Prism Effect

000ó127

194ó255

Rotating position

Counter-clockwise rotating, fast to slow

Frost

000ó255

0–100%

Zoom

000ó255

0–100%

Focus

000ó255

0–100%

000ó010 011ó255

No Function Beam Mode

000ó029

251ó255

No function

Operation

16 Gobo Wheel 2 Rotation

18 Animation Wheel Rotation

19 Prism 1

20 Prism 1 Rotation

21 Prism 2

22 Prism 2 Rotation

022ó042 043ó063 064ó084 085ó105 106ó127 128ó190 191ó192

125ó130

128ó189 190ó193

90-180 position 180-270 position 270-360 position 360-450 position 450-540 position Clockwise rotating, slow to fast Stop

Stop

Clockwise rotating, slow to fast Stop

26 Beam Mode

27 Control

-26- Maverick MK1 Hybrid User Manual Rev. 2

Page 31

Gobo Designs – Rotating a nd S t a ti c Wheels

Rotating Gobo Wheel

1. Half Moon and Sun

2. Broken Triangle

3. Star Field

4. Radial Star

5. Wavy Breakup

Turning Forks

Static Gobo Wheel

1. Full Aperture

2. Aperture 1/3

3. Aperture 1/2

4. Aperture 2/3

5. Aperture 5/6

6. Triangle Dots

7. Curvy Triangle

8. Random Dots

9. Symmetric Dots

10. Line

11. Laser Circle

12. Square Lines

13. Brick Out

14. Triangle Square

15. Shades

16. Crunch Bar

17. 5 Wave

18. Burst

Operation

Maverick MK1 Hybrid User Manual Rev. 2 -27-

Page 32

Color Wheels

Open

Operation

-28- Maverick MK1 Hybrid User Manual Rev. 2

Page 33

6. TECHNICAL INFORMATION

Product

To maintain optim um performance and minimize wear, c lean th is pro duc t f r eque ntl y. Us a ge an d

up reduces light output

reduced light source life and

Gently polish the lens surfaces until they are free of haze and lint.

Indicator

Meaning

Indicator

Meaning

Focus

Focus error detected

Y_cm

Tilt magnetic sensor error

Zoom

Zoom error detected

Y_op

Tilt optocoupler error

Prism

Prism error detected

CPU_A

IC-A error

Prism.R

Rotating prism error detected

CPU_B

IC-B error

Gobo

Gobo wheel 1 error detected

CPU_C

IC-C error

Gobo.R

Rotating gobo wheel 1 error detected

CPU_D

IC-D error

Gobo2

Gobo wheel 2 error detected

CPU_E

IC-E error

Gobo2.R

Rotating Gobo wheel 2 error detected

Head Fan1

Head fan 2 error detected

Color

Color error detected

Head Fan2

Head fan 2 error detected

Iris

Iris error detected

Base Fan1

Base fan 1 error detected

CYAN

Cyan error detected

Base Fan2

Base fan 2 error detected

MAGENTA

Magenta error detected

YELLOW

Yellow error detected

CTO

CTO error detected

X_cm1

Pan magnetic sensor 1 error detected

X_cm2

Pan magnetic sensor 2 error detected

X_op

Pan optocoupler error

Operation

Maintenance

Error Indication

environment are contributing factors in determining the cleaning frequency. As a rule, clean this product at least twice a month. Dust buildperformance and can cause overheating. This can lead to increased mechanical wear. To clean your product:

Unplug the product from power. 1. Wait until the product is at room temperature. 2. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the 3.

external vents.

Clean all external surfaces with a mild solution of non-ammonia glass cleaner or isopropyl 4.

alcohol. Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue. 5. Wipe any dirt or grime to the outside edges of the lens surface. 6.

Always dry the external surfaces thoroughly and carefully after cleaning them.

Do not spin the cooling fans by blowing compre ssed air into them.

Maverick MK1 Hybrid User Manual Rev. 2 -29-

Page 34

Operating Settings Configuration

Home Screen

The Maverick MK1 H ybrid has a home screen that shows the current control prot oc ols, per s on al ities ,

trol settings to immediatel y jump to that part of the menu, such as the persona lity, starting address, or universe, or press <ENTER> to reach the main menu.

Test Mode

Auto Test

To perform an auto test of the Maverick MK1 Hybrid functions, follow the instructions below:

Press <ENTER>.

Manual Test

To test the functions of the product manually, do the following:

Press <ENTER>.

Setup

To reach the Setup menu, follow the instructions below:

If using the buttons instead of the touchscreen, press <ENTER>.

Network Settings

Ethernet To DMX

The Maverick MK1 Hybrid can convert a single Ethernet input signal to a single DMX output signal.

Press <ENTER>.

Operation

starting addresses, IP addresses, and universes. To see the home screen, press <MENU> repeatedly until it s hows on the displa y. From the hom e screen, touch any of th e displayed con

Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>. 1. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Test Mode, or touch the display where it 2.

says Test Mode. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP> or <DOWN> to select Auto test, or touch the display where it says Auto test. 4.

Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>. 1. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Test Mode, or touch the display where it 2.

says Test Mode. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP> or <DOWN> to select Manual test, or touch the display where it says Manual test. 4. If using the buttons instead of the touchscreen, press <ENTER>. 5. Use <UP> or <DOWN> to select the function to test, from Pan, Tilt, P/S Speed, Red, Green, 6.

Blue, White, CTC, Color, Pattern, LED Macro, LED Ma. Speed, LED Ma. Fade, Background

Background Dim., Dimmer, Shutter, Function, or Zoom, or touch the display where it says

the desired function. If using the buttons instead of the touchscreen, press <ENTER>. 7. Change the value of the tested function with one of the following methods: 8.

• Type the desired value using the number pad that shows on the touchscreen display. or

• Use <UP>, <RIGHT>, <DOWN>, or <LEFT> to increase or decrease the value.

Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>. 1. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Setup, or touch the display where it says 2.

Setup.

-30- Maverick MK1 Hybrid User Manual Rev. 2

To activate or deactivate the Ethernet to DMX function, do the following:

Navigate to the Setup menu. Use <UP> or <DOWN> to select Art-Net Setup, or touch the display where it says Art-Net 2.

Setup. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP> or <DOWN> to select Ethernet To DMX, or touch the display where it says Ethernet 4.

To DMX. If using the buttons instead of the touchscreen, press <ENTER>. 5. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (deactivate) or YES (activate), or 6.

touch the display where it says the desired setting.

Page 35

Operation

IP Mode

The IP address of t he Maverick MK1 Hybrid can be set manually, by the n etwork, or to a pre-set

Press <ENTER>.

IP Address

In Manual IP Mode, the IP address must be assigned through the product menu. To set the IP

Press <ENTER>.

Subnet Mask

In Manual IP Mode, the Subnet Mask must be assigned through the product menu. To set the

Press <ENTER>.

static address specific to each product. To set the IP Mode, follow the instructions below:

Navigate to the Setup menu. Use <UP> or <DOWN> to select Art-Net Setup, or touch the display where it says Art-Net 2.

Setup. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP> or <DOWN> to select IP Mode, or touch the display where it says IP Mode. 4. If using the buttons instead of the touchscreen, press <ENTER>. 5. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from: 6.

• Manual (set the IP address with the control panel),

• DHCP (the network sets the IP address),

• Static (a pre-set address specific to each product),

or touch the display where it says the desired mode.

address in Manual IP Mode, do the following:

Navigate to the Setup menu. Use <UP> or <DOWN> to select Art-Net Setup, or touch the display where it says Art-Net 2.

Setup. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP> or <DOWN> to select IP, or touch the display where it says IP. 4. If using the buttons instead of the touchscreen, press <ENTER>. 5. Set the IP address (from 000.000.000.000 to 255.255.255.255) with one of the following 6.

methods:

Subnet Mask in Manual IP Mode, do the following:

Navigate to the Setup menu. Use <UP> or <DOWN> to select Art-Net Setup, or touch the display where it says Art-Net 2.

Setup. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP> or <DOWN> to select SubMask, or touch the display where it says SubMask. 4. If using the buttons instead of the touchscreen, press <ENTER>. 5. Set the Subnet Mask (from 000.000.000.000 to 255.255.255.255) with one of the following 6.

methods.

In DHCP or Static IP Mode, the IP and SubMask menu settings have no effect on the product.

Maverick MK1 Hybrid User Manual Rev. 2 -31-

Page 36

Pan/Tilt

To set whether the pan or tilt orientation is normal or inverted:”

Press <ENTER>.

Zoom

To set whether the zoom goes f rom wide to narrow or from narrow to wide, follow the instr uctions

Press <ENTER>.

Display

To set which way the display faces, do the following:

Press <ENTER>.

Pan/Tilt Angle

To set the range of motion the pan or tilt is permitted:

, or touch the display where it says the

Press <ENTER>.

Blackout on

Pan/Tilt

To set whether the product will black out during pan or tilt movement, follow the instructions below:

BL. O. P/T

Press <ENTER>.

Touchscreen

If the touchscreen is not responding correctly, it may need to be calibrated. To do so:

Follow the instructions, touching the points as they appear on the display.

Operation

Orientation

Navigate to the Setup menu. 1. Use <UP> or <DOWN> to select Pan Reverse or Tilt Reverse, or touch the display where it 2.

says the desired setting. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (normal orientation) or YES (inverted 4.

orientation), or touch the display where it says the desired option.

below:

Navigate to the Setup menu. Use <UP> or <DOWN> to select Zoom Reverse, or touch the display where it says Zoom 2.

Reverse. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (wide to narrow) or YES (narrow to 4.

wide) or touch the display where it says the desired option.

Navigate to the Setup menu. 1. Use <UP> or <DOWN> to select Screen Reverse, or touch the display where it says Screen 2.

Reverse. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (display is normal), YES (displa y is 4.

inverted), or AUTO (the display automatically detects which way the product is facing and

orients itself accordingly), or touch the display where it says the desired option.

Range

Movement

Calibration

-32- Maverick MK1 Hybrid User Manual Rev. 2

Navigate to the Setup menu. 1.

Use <UP> or <DOWN> to select Pan Angle or Tilt Angle

desired setting. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select 540 (540°), 360 or 270 (360° or 270° for 4.

pan or tilt respectively) or 180 (180°), or touch the display where it says the desired option.

Navigate to the Setup menu. 1.

Use <UP> or <DOWN> to select BL. O. P/T Move, or touch the display where it says

Move. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not black out) or YES (black out 4.

during movement), or touch the display where it says the desired option.

Navigate to the Setup menu. 1. Use <UP> or <DOWN> to select Calibration, or touch the display where it says Calibration. 2. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not calibrate) or YES (calibrate), 4.

or touch the display where it says the desired option. Press <ENTER>. 5.

Page 37

Operation

Touchscreen

To lock or unlock the touchscreen for the control panel, do the following:

Press <ENTER>.

Lock Screen

To completely lock or unlock the control panel, follow the instructions below:

Press <ENTER>.

Swap Pan and

To switch the pan and ti lt functions so that what normally controls the pan controls the tilt and what

Press <ENTER>.

Pan/Tilt Speed

To set the maximum speed of the pan and tilt:

Press <ENTER>.

WDMX Reset

To reset the WDMX connection from the Maverick MK1 Hybrid, do the following:

Press <ENTER>.

Lock

Navigate to the Setup menu. 1. Use <UP> or <DOWN> to select Touchscreen Lock, or touch the display where it says 2.

Touchscreen Lock. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (display will respond to touch) or YES 4.

(display will not respond to touch), or touch the display where it says the desired option.

Navigate to the Setup menu. 1. Use <UP> or <DOWN> to select Lock Screen, or touch the display where it says Lock Screen. 2. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (cont rol pan el will not lo ck) or YES 4.

(control panel will require a passcode to access), or touch the display where it says the desired

option. Press <ENTER>. 5.

To access the control panel when it has been locked:

Press <MENU>. 1. Enter the passcode 0920 using one of the following methods: 2.

• Through the touchscreen: use the number pad on the screen to enter 0920.

• With the buttons:

Use <DOWN> to select the number to be changed. a. Use <UP> to increas e the v alu e. b. Repeat until 0920 has been entered. c.

normally controls the tilt controls the pan, do the following:

Tilt

Navigate to the Setup menu. Use <UP> or <DOWN> to select Swap XY, or touch the display where it says Swap XY. 2. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (normal pan and tilt) or YES (pan 4.

controls tilt, tilt controls pan), or touch the display where it says the desired option.

Navigate to the Setup menu. 1. Use <UP> or <DOWN> to select XY Mode, or touch the display where it says XY Mode. 2. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Slow or Fast, or touch the display where 4.

it says the desired option.

Navigate to the Setup menu. 1. Use <UP> or <DOWN> to select WDMX Reset, or touch the display where it says WDMX 2.

Reset. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not reset connection) or YES 4.

(reset the connection), or touch the display where it says the desired option.

Maverick MK1 Hybrid User Manual Rev. 2 -33-

Page 38

Backlight Timer

To set the amount of time after inactivity before the display backlight turns off:

Press <ENTER>.

Loss of Data

In case of an input si gnal being l ost in an y way, the Maverick MK1 H ybrid will respond in on e of t wo

Press <ENTER>.

Fan Speed

To set the speed of the fans, do the following:

Press <ENTER>.

Dimmer Curve

To set the dimmer curve, follow the instructions below:

Press <ENTER>.

Dimmer Speed

To set the dimmer speed, do the following:

Press <ENTER>.

Operation

Navigate to the Setup menu. 1. Use <UP> or <DOWN> to select Backlight Timer, or touch the display where it says Backlight 2.

Timer. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select 30S (after 30 seconds of inactivity), 1M 4.

(after 1 minute of inactivity), 5M (after 5 minutes of inactivity), or ON (does not turn off), or touch

the display where it says the desired option.

ways. the product will either hold the last signal received, or black out all LED output. To set which way the product responds, follow the instructions below:

Navigate to the Setup menu.

(black out all LED output), or touch the display where it says the desired option.

Navigate to the Setup menu. 1. Use <UP> or <DOWN> to select Fans, or touch the display where it says Fans. 2. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Auto (fan speed set according to product 4.

temperature), Full (maximum speed), or ECO (quiet fans mode), or touch the display where it

says the desired option.

Navigate to the Setup menu. 1. Use <UP> or <DOWN> to select Dimmer Curv e , or touch the display where it says Dimmer 2.

Curve. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Linear, Square, I Squa, or SCurve, or 4.

touch the display where it says the desired option.

Navigate to the Setup menu. 1. Use <UP> or <DOWN> to select Dimmer Spe ed , or touch the display where it says Dimmer 2.

Speed. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Smooth or Fast, or touch the display 4.

where it says the desired option.

-34- Maverick MK1 Hybrid User Manual Rev. 2

Page 39

Operation

Reset

To reset the pan, tilt, or all functions as if from startup:

Press <ENTER>.

Factory Reset

To restore the Maverick MK1 Hybrid to factory default settings, do the following:

Press <ENTER>.

System Information

All information about the current status of the Maverick MK1 Hybrid is available through the

Use <UP> or <DOWN> to scroll through the inform at ion.

Functions

Navigate to the Setup menu. 1. Use <UP> or <DOWN> to select Reset Function, or touch the display where it says Reset 2.

Function. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP> or <DOWN> to select the function to reset, from Pan, Tilt, or All, or touch the display 4.

where it says the desired option. If using the buttons instead of the touchscreen, press <ENTER>. 5. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from NO (do not reset) or YES (reset), or 6.

touch the display where it says the desired option.

Navigate to the Setup menu. 1. Use <UP> or <DOWN> to select Factory Settings, or touch the display where it says Factory 2.

Settings. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not reset) or YES (reset to factory 4.

settings), or touch the display where it says the desired option.

product’s Sys Info menu. To view this information, follow the instructions below:

Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Sys Info, or touch the display where it 2.

says Sys Info. If using the buttons instead of the touchscreen, press <ENTER>. 3. Use <UP> or <DOWN> to select from Fixture Information (shows firmware version, running 4.

mode, starting address, etc.), Fan Information (shows speed of the head fans in rpm), Error

Information (shows any errors or No E rror!), or Channel Information (shows the current value

of all signal input channels) or touch the display where it says the desired option. Press <ENTER>. 5.

Maverick MK1 Hybrid User Manual Rev. 2 -35-

Page 40

Offset Mode

The Offset mode provides fine adjustments for the home position of all the moving parts in the optical path as well as the pan and tilt movements. This way, when in their home position, the

This brings you into the Zero Adjust menu screen.

PAN

To adjust the starting point of the pan motor, follow the instructions below:

4. Press <ENTER>.

TILT

To adjust the starting point of the tilt motor, do the following:

4. Press <ENTER>.

ZOOM

To adjust the starting point of the zoom motor, follow the instructions below:

4. Press <ENTER>.

MAC Address

To assign the fourth, fifth, or sixth digit of the MAC address, do the following:

4. Press <ENTER>.

Operation

moving parts do not show any border or reduce the light output.

1. Starting from the Main Level screen, press and hold <MENU> until the passcode screen appears.

2. Enter the passcode 2323 using one of the following methods:

• Through the touchscreen: use the number pad on the screen to enter 2323.

• With the buttons:

Use <DOWN> to select the number to be changed. a. Use <UP> to increas e the v alu e. b. Repeat until 2323 has been entered. c.

3. Press <ENTER>.

1. Use <UP> or <DOWN> to select PAN.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

1. Use <UP> or <DOWN> to select TILT.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

1. Use <UP> or <DOWN> to select ZOOM.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

1. Use <UP> or <DOWN> to select MAC4, MAC5, or MAC6.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the value, from 000–255.

-36- Maverick MK1 Hybrid User Manual Rev. 2

Page 41

5. FIRMWARE UPDATE

The following steps apply to the Windows® 7 operating system:

Step 1

Connect the Maverick MK1 Hybrid to a computer

Step 2

Set the control protocol on the Maverick MK1

Step 3

On the computer, open the Network and Sharing Center (through the Start Menu, the Control Panel, o r

Step 4

Select the network that the product is connec ted to by clicking the blue text th at corresponds to that network

Firmware Update

1. with an ethernet cable.

Verify the network with the Maverick MK1 Hybrid 2.

is connected to the computer.

1. Hybrid to ArtNet in Single Control mode. (See Single Control Protocol)

Set the IP Mode to Static. (See IP Mode) 2.

the Network icon on the right side of the Taskbar).

on the right side of the window.

Maverick MK1 Hybrid User Manual Rev. 2 -37-

Page 42

Step 5

Click Properties on the Status window that pops up.

Step 6

On the Properties window:

Step 7

On the TCP/IPv4 Properties window:

Firmware Update

Click on Internet Protocol Version 4 (TCP/IPv4) 1.

to select it.

Click Properties. 2.

Select Use the following IP address: 1. Type 2.255.0.0 into the IP address bar. 2. Press <Tab> on your keyboard. The Subnet 3.

mask bar should automatically populate as

255.0.0.0. If not, then enter it manually.

Ignore the Default gateway bar. 4.

-38- Maverick MK1 Hybrid User Manual Rev. 2

Page 43

Step 8

View the Home Screen on the Maverick MK1

URL bar of the internet browser.)

Step 9

On the Welcome screen:

If the user name and password do not work, reset the product to factory defaults. (see Factory Reset)

Step 10

On the page that appears, click Upgrade.

Step 11

Find the latest Firmware Upgrade on the website at ck-mk2-wash under DOWNLOADS.

Step 12

Click Choose File on the Maverick MK1 Hybrid

display. Once the product finishes installing the Do NOT turn the product off during this process.

Step 13

On the Maverick MK1 H ybrid, verify the firmware has

) and checking that the version number

Step 15

Disconnect the Maverick MK1 Hybrid from the computer. The firmware update is complete.

Hybrid. (see Home Screen)

Open the internet browser on the computer. 2. Enter the IP address from the Maverick MK1 3.

Hybrid display into the URL bar of the internet browser. (For example, if the display of the product reads 2.11.0.1, enter 2.11.0.1 into the

Enter admin as both the User Name and 1.

Password. No capital letters.

Press Log In on the screen, or <Enter> on the 2.

keyboard.

Firmware Update

https://www.chauvetprofessional.com/products/maveri

1. Upgrade page.

In the File Explorer window that pops up, select 2.

the Firmware Upgrade file from the website and click Open.

Click Upload File. 3.

A Downloading message will appear on the product’s firmware, it will reset.

been updated by navigating to Sys Info (System Information matches the name of the file on the computer.

The examples shown are for illustrative purposes.

Maverick MK1 Hybrid User Manual Rev. 2 -39-

Page 44

Product

To maintain optim um performance and minimize wear, you s ho uld cle an this product fr equent l y.

up reduces light output

e overheating. This can lead to reduced light source life and

Gently polish the lens surfaces until they are free of haze and lint.

Dimensions and

Length

Width

Height

Weight

15.51 in (394 mm)

12.09 in (307 mm)

24.76 in (629 mm)

66.7 lb (30.3 kg)

Note: Dimensions in inches rounded to the nearest decimal digit.

Electrical

Power Supply Type

Range

Voltage Selection

Switching (internal)

100–240 VAC, 50/60 Hz

Auto-ranging

Parameter

120 VAC, 60 Hz

208 VAC, 60 Hz

230 VAC, 50 Hz

Consumption

670 W

648 W

651 W

Current

5.45 A

3.12 A

2.81 A

Fuse/Breaker

F 10 A, 250 V

Power I/O

U.S./Canada

Worldwide

Power input connector

Seetronic Powerkon IP65

Power output connector

Seetronic Powerkon IP65

Power cord plug

Edison (U.S.)

Local plug

Light Source

Type

Power

Lifespan

Lamp Osram Sirius

440 W

1,500 hours

Color

Quantity

7000 K 1

Photometrics

Parameter

Value

Color Temperature

6207 K (at full)

Illuminance @ 15 m (2°)

212,100 lux

Illuminance @ 15 m (3°)

123,200 lux

Illuminance @ 5 m (18°)

25,800 lux

Illuminance @ 5 m (19°)

16,000 lux

Illuminance @ 5 m (41°)

2,235 lux

Technical Specifications

6. TECHNICAL INFORMATION

Maintenance

Usage and environment are contributing factors in determining the cleaning frequency. As a rule, clean this product at least twice a month. Dust buildperformance and can caus increased mechanical wear. To clean your product:

Unplug the product from power. 1. Wait until the product is at room temperature. 2. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the 3.

external vents.

Clean all external surfaces with a mild solution of non-ammonia glass cleaner or isopropyl 4.

alcohol. Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue. 5. Wipe any dirt or grime to the outside edges of the lens surface. 6.

Always dry the external surfaces thoroughly and carefully after cleaning them.

Do not spin the cooling fans by blowing compressed air into them.

7. TECHNICAL SPECIFICATIONS

Weight

-40- Maverick MK1 Hybrid User Manual Rev. 2

Page 45

Technical Specifications

Parameter: Beam

Value

Beam Angle

1°

Field Angle

2°

Parameter: Spot

Value

Beam Angle

1° to 6°

Field Angle

3° to 18°

Zoom Angle

3° to 18°

Parameter: Wash

Value

Beam Angle

9° to 22°

Field Angle

19° to 41°

Zoom Angle

19° to 41°

DMX

I/O Connector

Channel Range

3- and 5-pin XLR

27 or 30

Art-Net™/sACN

I/O Connector

Channel Range

Amphenol XLRnet

27 or 30

Thermal

Max. External Temperature

Cooling System

113 °F (45 °C)

Fan-Assisted Convection

Ordering

Product Name

Item Name

Item Code

UPC Number

Maverick MK1 Hybrid

MAVERICKMK1HYBRID

08011202

781462215507

Maverick MK1 Hybrid User Manual Rev. 2 -41-

Page 46

To get support or return a product:

If you are located in an y other country, DO NOT contact Chauvet. Instead, cont act your local

for distributors outsid e the U.S., U K, Ireland, Mexico ,

or Benelux.

If you are located outside the U.S., UK, Ireland, Mexico, or Benelux, contact your distributor of record and follow their instructions on how to return Chauvet products to them. Visit our website www.chauvetlighting.com for contact details.

Call the corresponding Chauvet Technical Support office and request a Return Merchandise

uct. Be prepared to provide the model

Send the merchandise pr epai d, in its or iginal b ox, an d with i ts orig inal pack ing a nd ac cess ories.

bel the package with the RMA number. Chauvet will refuse any product returned

without an RMA number.

Write the RMA number on a properly affixed label. DO NOT write the RMA number directly on the box.

Before sending the produc t , c learly write the following information on a piece of paper and plac e

Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be your responsibility. FedEx packing or double-boxing are recommended.

Chauvet reserves the right to use its own discretion to repair or replace returned product(s).

User Manual

ETURNS

• If you are located in the U.S., contact Chauvet World Headquarters.

• If you are located in the UK or Ireland, contact Chauvet Europe Ltd.

• If you are located in Mexico, contact Chauvet Mexico.

• If you are located in Benelux, contact Chauvet Europe BVBA.

distributor. See www.chauvetlighting.com

Authorization (RMA) number before shipping the prod number, serial number, and a brief description of the cause for the return.

Chauvet will not issue call tags. Clearly la

it inside the box:

• Your name

• Your address

• Your phone number

• RMA number

• A brief description of the problem

-42- Maverick MK1 Hybrid User Manual Rev. 2

Page 47

WORLD HEADQUARTERS

General Information – Chauvet

Technical Support

EUROPE

General Information

Technical Support

General Information

Technical Support

MEXICO

General Information - Chauvet Mexico

Voice: +52 (728) 690-2010

Technical Support

Visit the applicable website above to verify our contact information and instructions to request record.

User Manual

ONTACT

Address: 5200 NW 108th Avenue Sunrise, FL 33351 Voice: (954) 577-4455 Fax: (954) 929-5560 Toll free: (800) 762-1084

Address: Stokstraat 18 9770 Kruishoutem Belgium Voice: +32 9 388 93 97

Address: Unit 1C Brookhill Road Industrial Estate Pinxton, Nottingham, UK NG16 6NT Voice: +44 (0)1773 511115 Fax: +44 (0)1773 511110

Address: Av. de las Parti das 34-3B Zona Industrial Lerm a (Entrance by Calle 2) Lerma, Mexico C.P. 52000

Voice: (844) 393-7575 Fax: (954) 756-8015 Email: chauvetcs@chauvetlighting.com

World Wide Web www.chauvetlighting.com

Email: Eutech@chauvetlighting.eu

World Wide Web www.chauvetlighting.eu

Email: uktech@chauvetlighting.com

World Wide Web www.chauvetlighting.co.uk

Email: servicio@chauvet.com.mx World Wide Web www.chauvet.com.mx

support. Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux contact the dealer of

Maverick MK1 Hybrid User Manual Rev. 2

Maverick MK1 HYBRID User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

1. BEFORE YOU BEGIN

Safety Notes

2. INTRODUCTION

Overview

Dimensions

3. SETUP

Signal Connections

Menu Map

4. OPERATION

Operating Settings Configuration

Home Screen

Network Setup

Personality

Settings

Test Mode

System Information

DMX Values

Gobo Designs – Rotating a nd S t a ti c Wheels

Color Wheels

6. TECHNICAL INFORMATION

Error Indication

Operating Settings Configuration

Home Screen

Test Mode

Setup

Network Settings

WDMX Reset

Navigate to the Setup menu. 1. Use <UP> or <DOWN> to select Touchscreen Lock, or touch the display where it says 2.

Factory Reset

System Information

5. FIRMWARE UPDATE

Technical Specifications

6. TECHNICAL INFORMATION

7. TECHNICAL SPECIFICATIONS