Maverick ET-735 Instruction Manual

1

INSTRUCTION MANUAL

Front View

Back View

Side View

MODEL: ET-735 Maverick Redi Chek Barbecue Bluetooth Thermometer

Congratulations on purchasing the Maverick Redi Chek Barbecue Bluetooth Thermometer,
ET-735. This unit will allow you to monitor the temperature of your food cooking
in the oven or on the grill via Bluetooth to your Smart Phone or Tablet in your
home. This unit will beep to alert you when your food is ready or your BBQ
temperature is out of the range you set.

Components

1. Maverick Redi Chek Barbecue Bluetooth Thermometer main unit

2. Two detachable waterproof stainless steel food probes

3. Wire Stand

Thermometer Features

A. LCD (Liquid Crystal Display) – Displays all icons and temperature

1. Temperature Value – indicates the current temperature of the probes

2. Probe Number – indicates the current probe number being displayed

3. Cycling Icon – the device is in display cycling mode

4. Alert Sound – indication of Alert Sound is set

5. Bluetooth Icon – indicates the connection status of Bluetooth

6. Battery Status – indicates the status of the batteries

7. Temperature Units of measure – either °C/°F

8. The thermometer comes with the ability to monitor 4 probes. This

model comes with 2 probes. Additional probes can be purchased. See
the probe ordering section after the warranty.

B. Battery Compartment – Holds AAA x2 batteries.

2

Open the battery compartment of the ET-735 by screw driver and insert two
“AAA” batteries (not included) oriented with correct polarity

C. Wire Stand – Allows you to stand the thermometer on a tabletop or it can be

reversed and used as a hanger.

D. Status Indicator - Blue LED to indicate the Bluetooth status.

Buttons:

1. Sound/Temperature Unit – Press and hold for 2 seconds to activate the

Alert sound of the unit. The Thermometer will alert you to temperatures in
addition to your smart device. Press quickly to select temperature unit °C/°F.

2. Bluetooth – Press and hold to turn on the Bluetooth or turn off the

Bluetooth.

3. Power/Probe – Press and hold for 2 seconds to turn on or off the unit.

Press quickly to display probe 1, 2, 3, 4 in cycling mode.

Apps Installation:

This device supports Smartphone iOS and Android operating systems. Search for
the “Redi-Chek” app in the Apple App Store or Google Play Store accordingly.
Type in Search words “BBQ Redi-Chek”. Click install and follow the on screen
instructions for installation.

Compatibility list (Updated from Time to Time)

For iOS

A. iPhone 4S
B. iPhone 5

C. iPhone5S

For Andriod

A. Samsung Galaxy S4
B. Samsung Galaxy S4 mini
C. Samsung Galaxy S5
D. Samsung Note 2
E. Samsung Note 3
F. Sony Xperia Z1
G. LG Nexus 5

3

H. LG G3
I. HTC One M8
J. Motorola Moto G

Connect the device with Smartphone (First Time):

1. After the app has been installed, enter the app, the app will direct you back to

the Smartphone’s setting page to switch on the Bluetooth.

2. Press and hold the Power/Probe for 2 seconds to turn on the ET-735

3. Please go back to the “Redi Chek” app on your smartphone and pair the ET-735

and your smartphone in the app.

4. Only pair the Barbecue Thermometer through the app, not through the

Bluetooth settings. The app will show the current Bluetooth devices; choose to
let your ET-735 connect. If the device list on the app isn’t showing any ET-735
device, please drag down the screen and refresh the page again.

5. After the app shows up on the main screen, then you can start using the app.

NOTE: THE PROBE MUST BE PLUGGED INTO THE THERMOMETER
IN ORDER FOR THE DEVICE TO WORK PROPERLY.

6. If you cannot connect to app, restart app and disconnect Bluetooth

connection. Restart installation process.

7. For IOS------- Go to the Bluetooth Setting page, and look for the ET-735, and

press the “I” icon, then user can “forget this device”

8. For Android- Go to the Bluetooth Setting Page, by “Unpairing” the device.

Loss link alert (Out of Range):

1. The ET-735 will work normally with the Smart Phone within 160 feet (line of

sight). If the ET-735 is taken out of the Bluetooth working distance, the
Bluetooth link will be lost. You will see the Status LED blinking and the
Bluetooth logo on the LCD display flashing.

2. Simply bring the Smartphone back to the working distance of Bluetooth, ET-

735 and the app will reconnect automatically. Re-pair and there should not be
any impact to your cooking data stored in the ET-735.

3. The ET-735 will try to reconnect to the Bluetooth for ONE hour after loss link

(Status Blue LED will keep flashing). If this is the case, user must restart the
app and press the Bluetooth button on ET-735 to reconnect again.

Setting the Selected Food Temperature: