VNA MAKE & MODEL — MAURY KIT MODEL
NO R&S ZV AGILENT AGILENT AGILENT
SOFTWARE ZV SERIES 8510C 8719/20/22 PNA SERIES
2660Q10 2660Q11 2660Q14 2660Q15 2660Q17
2660Q20 2660Q21 2660Q24 2660Q25 2660Q27
MAURY MICROWAVE CORPORATION 39 VNA Calibration Kits, Microwave Components & Adapters
Precision VNA Calibration Kits
Economy VNA Calibration Kits
Single-Sex or Dual-Sex Fixed Termination Kits
Features
Fixed Load Calibration
3.5mm, Type N, TNC and BNC
Connectors
Rugged Plastic Instrument Case
DC to 26.5 GHz
1
Description
This series of low cost fixed load calibration kits covers frequencies
from DC to 26.5 GHz
1
. The kits contain the standards needed to
calibrate scalar or vector network analyzers and are housed in
rugged, molded plastic cases. The increased durability of the cases
makes these kits ideal for field service use. The VNA software
provided in the operating instructions manual can be keyed in
from the front panel of the analyzer. The kits are available in
female/male dual-sex configurations or in single-sex female or
male configurations.
Available Kits
Select the calibration kit number for the appropriate network
analyzer test port connector type.
8550Q02
8550Q03
1 Female fixed offset short*
1 Male fixed offset short**
1 Female open*
1 Male open**
1 Female fixed termination*
1 Male fixed termination**
1 Instrument case
* Included in female single-sex kits and dual-sex kits; excluded from male
single-sex kits.
** Included in male single-sex kits and dual-sex kits; excluded from female
single-sex kits.
Recommended Accessories for these Kits
Connector Gage Kits See page 92.
A034B 3.5mm Connector gage kit (push-on type)
A050A 3.5mm Digital Connector gage kit (thread-on type)
A020A Type N Connector gage kit (push-on type)
A020D Type N Connector gage kit (thread-on type)
A012A BNC Connector gage kit (push-on type)
Torque Wrenches See page 94.
8799A1 3.5mm, 5/16-inch (8 in. lbs)
2698C2 Type N, 3/4-inch hex (12 in. lbs)
Components Included in Economy Kits
DESCRIPTIONQUANTITY
NETWORK ANALYZER
MAURY KIT MODEL
TEST PORT TYPE Female Only Male Only Female and Male
3.5mm 8050Q01 8050Q02 8050Q03
Type N 8850Q01 8850Q02 8850Q03
BNC 8550Q01 8550Q02 8550Q03
TNC 8650Q01 8650Q02 8650Q03
Recommended Adapters for these Kits
Phase Matched Adapters See pages 111, 114 and 116.
8023B1 3.5mm female to type N male
8023D1 3.5mm male to type N male
8022A2 3.5mm female to 7mm
8022B2 3.5mm male to 7mm
8828A Type N female to type N female
8828B Type N male to type N male
8828C Type N female to type N male
8821C1 Type N male to BNC female
8821D1 Type N male to BNC male
In-Series Adapters See page 119.
232A11 TNC female to TNC female
232B11 TNC male to TNC male
232C11 TNC female to TNC male
1
3.5mm operates to 26.5 GHz, type N/TNC to 18 GHz and BNC to 10 GHz.
Economy TRL Calibration Kits - 7mm
Need a 7mm Economy TRL Kit? Maury offers the following:
This series of low cost TRL calibration kits covers frequencies from 800 MHz to
18 GHz, or 800 MHz to 4 GHz, and contain the shorts and air lines needed to
perform TRL calibration of vector network analyzers and devices equipped with
7mm connectors. Kit components are provided in foam-lined wood instrument
cases. For more information please contact the Maury Sales Department. See
also Maury data sheet 2Z-042.
FREQUENCY
RANGE
(GHz)
0.8 – 18.0
0.8 – 4.0
Loading...