Page 1
00007-1850-G3 FCC flyer for
2.4 GHz RC item only
FOR PRODUCT SOLD IN USA • POUR LES PRODUITS VENDUS AUX ÉTATS-UNIS
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or
NOTE:
Changes or modifications not expressly approved by the manufacturer responsible for compliance
could void the user’s authority to operate the equipment.
Cet appareil est conforme à l'article 15 de la réglementation de la FCC.
L'utilisation de ce dispositif est autorisée seulement aux deux conditions suivantes :
(1) il ne doit pas produire de brouillage nuisible, et (2) l'utilisateur du dispositif doit être prêt à accepter
tout brouillag e radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement
du dispositif.
• Cet appareil a été testé et jugé conforme aux limites de la classe B pour un appareil numérique en vertu de
l'article 15 de l a réglementation de la FCC. Ces limites ont été instaurées pour fournir une protection
raisonnable contre toute interférence nuisible dans une installation résidentielle. Cet appareil génère, utilise et
peut émettre de l'énergie radiofréquence. S'il
peut provoquer des interférences sur les communications radio. Cependant, il n'est pas garanti que des
interférences ne se produiront pas dans certaines installations. Si cet appareil cause des interférences à la
réception radio ou télévisée (ce qui peut être vérifié en éteignant l'appareil puis en le remettan t sous tension),
l'utilisateur peut tenter de les résoudre en suivant une ou plusieurs des mesures ci-après :
• Réorienter ou déplacer l'antenne réceptrice.
• Augmenter l'espace entre l'appareil et le récepteur.
• Brancher l'appareil sur une prise de courant différente de celle sur laquelle le récepteur est branché.
• Pour obtenir de l'aide, contacter le vendeur ou un technicien radio/télévision expérimenté.
REMARQUE : Tout changement ou modification de cet appareil n'ayant pas été expressément approuvé
par les parties responsables de sa conformité peut entraîner l'annulation du droit d'exploitation de
l'équipement par l'utilisateur.
an experienced radio/TV technician for help.
n' est pas installé et utilisé conformément aux instructions, il
size: 138 x 175 (mm)
FOR PRODUCT SOLD IN CANADA • POUR LES PRODUITS VENDUS AU CANADA
CAN ICES-3 (B)/NMB-3(B)
This equipment complies with FCC & Canada radiation exposure limits set forth for uncontrolled environments.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Cet équipement est conforme aux limites d’exposition aux radiations définies par le Canada pour des environnements non
contrôlés. Cet émetteur ne doit pas être installé au même endroit ni utilisé avec une autre antenne ou un autre émetteur.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s).
L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences
et Développement économique Canada applicables aux appareils radio exempts de licence.
Operation is subject to the following two conditions:
(1) This device may not cause interference. (2) This device must accept any interference, including interference
that may cause undesired operation of the device.
L'exploitation est autorisée aux deux conditions suivantes :
(1) L'appareil ne doit pas produire de brouillage; (2) L'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
00007-1850-G3
Page 2
Smart Device not included.
EA
RN
REWARDS
FIND
TREASURE
LE
VEL
UP
H
8
PMS 021C Orange
ITEM NO.: FRW24 LANG.: DOM
PART CODE: FRW24-0910G1-1101950750-DOM
ITEM NAME: Hot Wheels TECH MODS
TOY YEAR: 2018 Fall
PKG. SIZE:
PKG. SPEC.: Sleeve VER.: G1 2nd
BLANK SIZE:
NOTES TO PRINTER: Proofs accurate for process color only. All spot colors must follow PMS Color
Formula Guide or color swatch specified.
8.8"(W) x 4''(D) x 10''(H)
10"(W) x 34" (H)
GRAPHIC DESIGNER: Ramen
PI ENGINEER:
PROJECT ENGINEER:
CS VENDOR: IASIK
SOFTWARE: Illustrator CC
COLOR PROFILE/LPI: Mag CCNB/175lpi
CS DATE: 11/13/2018
PROOF APPROVAL
SIGN OFF
(GRAPHIC):
DATE:
C18S1031-1-FRW24-0910G1-1101950750-DOM(OP)
FRW24 TechMods - Hyper Speeder
Sleeve : 9” x 4” x 10”
5C
(4c + PMS 021 orange) + Matt UV + Spot UV(for front panel only)
G-change version
10/30/2018
HOTWHEELS.COM/TECHMODS
COLORS AND DECORATIONS MAY VARY.
CHECK IF YOUR SMART DEVICE IS COMPATIBLE:
Dispose of product safely. Dispose of battery safely.
Non-replaceable 3.7V 250 mAh Lithium Polymer rechargeable battery is included.
that may trigger epilepsy in sensitised individuals.
This toy produces flashes
WARNING:
BUILD IT. DRIVE IT. GAME IT.
EARN REWARDS FIND TREASURE LEVEL UP
CAR CONTROLS APPAPP CONTROLS CAR
CAR CONTROL MODE
2 MODES OF VEHICLE GAME PLAY
THE FIRST EVER GAMING RC
ENHANCE YOUR RC EXPERIENCE WITH THE TECHMODS APP
ENHANCE YOUR RC EXPERIENCE WITH THE TECHMODS APP
RC MODE
Smart Device not included.
WAP 6
THE GAMING RC
CHECK IF YOUR SMART DEVICE IS COMPATIBLE:
HOTWHEELS.COM/TECHMODS
8-16
THE GAMING RC
UNASSEMBLED
COLORS AND DECORATIONS MAY VARY.
Smart Device not included.
Data rates may apply.
Battery Capacity:
CONFORMS TO THE SAFETY REQUIREMENTS OF ASTM F963.
©2018 Mattel. MATTEL, HOT WHEELS and associated trademarks and trade dress are owned by Mattel. ® and ™ designate U.S. trademarks of Mattel, except as noted. Consumer Services - Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052,
U.S.A. 1-800-524-8697. Mattel Australia Pty. Ltd., Richmond, Victoria. 3121. Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Tel.: (852)
3185-6500. Diimport & Diedarkan Oleh: Mattel Southeast Asia Pte. Ltd. , No 19-1, Tower 3 Avenue 7, Bangsar South City, No 8, Jalan Kerinchi, 59200 Kuala Lumpur, Malaysia. Tel: 03-33419052. Mattel South Africa (PTY) LTD, Office 102 I3, 30
Melrose Boulevard, Johannesburg 2196. Manufactured for and imported into the EU by: Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland. Additionally distributed in the EU by: Mattel U.K. Ltd., Vanwall Business Park,
Maidenhead SL6 4UB. Helpline 01628 500303 .
MADE IN CHINA.
Apple, the Apple logo, iPhone, and iPad are trademarks of Apple Inc., registered in the U.S. and other countries and regions. App Store is a service mark of Apple Inc.
Google Play and the Google Play logo are trademarks of Google LLC.
Bluetooth® and Bluetooth® Smart wordmark and logos are owned by Bluetooth SIG, Inc.
Copyright © 2018 Dash Robotics, Inc. All Rights Reserved.
FCC ID: PIYFRW24-19B5R
250 mAh
FRW24-0910G1
1101950750-Dom
FRW24
CHECK IF YOUR SMART DEVICE IS COMPATIBLE:
HOTWHEELS.COM/TECHMODS
CONTENTS:
6 Neoflex™ panels, snap rivets,
electronics module with gearbox,
accessories, USB cable and quick guide.
Page 3
PMS 021C orange
FRW24-0930-G1
1101796198-Dom
USB CABLE
RIVETS
FRW24-0931-G1
1101796199-Dom
Running change
Quick Start card
PMS ORG 021 Opacity: 90%
2c + Matt PP lamination
STROKE LINE
CCNB 2c/1c +Matt UV, 250+250gsm
Front panel
THE GAMING RC
175 x 200mm
8-16
THE GAMING RC
8-16
DOWNLOAD THE
HOT WHEELS TECHMODS APP
Follow instructions in the app to build your car.
Data rates may apply.
®
™
CHARGE YOUR VEHICLE
Use the provided USB cable to charge your car.
SYNC YOUR VEHICLE
Connect your vehicle via Bluetooth
and start driving!
HYPER SPEEDER
THE GAMING RC
THE GAMING RC
Smart Device not included.
Back panel
Includes one Non-Removable 3.7V 250 mAh Rechargeable LiPo Battery Pack and 5VDC USB cable.
Keep these instructions for future reference as they contain important information.
ON = Press button once.
BATTERY CHARGING
Switch off your RC vehicle before charging. To charge, insert the included USB cable into your RC vehicle’s micro USB port, as shown in the
picture. Plug the other end of the cable into a 5V smartphone charger or computer's USB port.
Your RC vehicle will automatically begin charging the battery. The orange light next to the USB port indicates that the battery is charging.
Once charging is complete, the orange light will turn off. Charging takes about 45 minutes.
SAFETY INFORMATION
Operation: Do not submerge, burn, puncture, crush, microwave or expose your RC vehicle to water, extreme heat or fire. Do not operate your RC vehicle in very dusty or sandy
environments – debris may damage the mechanisms. Do not allow fingers, hair or clothing to become entangled in your RC vehicle’s moving parts. Do not operate your RC vehicle near
anyone’s face or eyes. If your RC vehicle motors jam, immediately stop operations and deactivate the RC vehicle. Identify and correct the jam before reactivating the RC vehicle. Do not
operate the RC vehicle if the electronics or mechanisms are damaged.
Use and Maintenance: Hot Wheels
in performance, or if your RC vehicle is not properly responding to commands. Do not operate your RC vehicle in rain or other wet conditions—this can potentially damage your RC vehicle.
If your RC vehicle motors jam, immediately stop operations and deactivate the RC vehicle. Identify and correct the jam before reactivating the RC vehicle. Do not operate the RC vehicle
if the electronics or mechanisms are damaged. DO NOT clean your RC vehicle with any liquids. DO NOT use water, alcohol, household cleaners, ammonia, window cleaner, aerosol sprays,
solvents or abrasives. Use only a clean, dry, lint-free cloth to gently remove debris.
BATTERY SAFETY INFORMATION
In exceptional circumstances batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:
• Rechargeable batteries are only to be charged under adult supervision • The supply terminals are not to be short-circuited. • Dispose of battery safely.
• Do not dispose of this product in a fire. The battery inside may explode or leak. • Dispose of product with non-removable battery safely.
NOTE: Hot Wheels
RESET: If this product begins to operated erratically, you may need to reset the electronics. To resume normal operation turn the RC vehicle off, wait 10 seconds,
and then turn the RC vehicle back on.
USE & MAINTENANCE
• Hot Wheels
• Recharge your RC vehicle if you see a reduction in performance, or if your RC vehicle is not properly responding to commands.
• Do not operate your RC vehicle in rain or other wet conditions—this can potentially damage your RC vehicle.
• If your RC vehicle motors jam, immediately stop operations and deactivate the RC vehicle. Identify and correct the jam before reactivating the RC vehicle.
• Do not operate the RC vehicle if the electronics or mechanisms are damaged.
• DO NOT clean your RC vehicle with any liquids. DO NOT use water, alcohol, household cleaners, ammonia, window cleaner, aerosol sprays, solvents or abrasives.
Use only a clean, dry, lint-free cloth to gently remove debris.
Protect the environment by not disposing of this product or any batteries with household waste. This symbol indicates that this product shall not be treated as household
waste. Check your local authority for recycling advice and facilities.
®
TechMods™ smart RC vehicle contains small parts not suitable for children under the age of three. Recharge your RC vehicle if you see a reduction
®
TechMods™ smart RC vehicle is equipped with an automatic shut-off feature that helps preserve battery life.
®
TechMods™ smart RC vehicle contains small parts not suitable for children under the age of three.
OFF = Press and hold button for a few seconds.
The toy is only to be connected to equipment bearing the following symbols:
The toy are to be regularly examined for damage to the cord, plug, enclosure and other parts, and in the event of such damage, they must not be used until
the damage has been repaired.
Batteries are not intended to be replaced or removed by consumers. Before disposal in the waste stream, the batteries must be removed by a qualified professional
and disposed of separately according to local regulations on battery collection and recycling.
CAUTION: To prevent entanglement, keep all hair away from the wheels.
This toy is not to be connected to more than the recommended number of power supplies.
Apple, the Apple logo, iPhone, and iPad are trademarks of Apple Inc., registered in the U.S. and other countries and regions. App Store is a service mark of Apple Inc.
Google Play and the Google Play logo are trademarks of Google LLC.
®
Bluetooth
and Bluetooth® Smart wordmark and logos are owned by Bluetooth SIG, Inc.
Copyright
© 2018 Dash Robotics, Inc. All Rights Reserved.
© 2018 Mattel.
FCC ID: PIYFRW24-19B5R
FRW24-0932G1-1101796200-Dom
1 FCC flyer (00007-1850) is required
to be placed inside the packaging.
DOWNLOAD
THE APP:
1c inside spine
glued to hinged box
Cable cover Accessory box
CCNB 1c +Matt UV, 250gsm
C18S1031-1-FRW24-0911G1-1101950723-DOM(OP)
ITEM NO.: FRW24 LANG.: DOM
PART CODE: FRW24-0911G1-1101950723-DOM
ITEM NAME: Hot Wheels TECH MODS
TOY YEAR: 2018 Fall
PKG. SIZE:
PKG. SPEC.: Hyper speeder VER.: G1 2nd
BLANK SIZE:
NOTES TO PRINTER: Proofs accurate for process color only. All spot colors must follow PMS Color
Formula Guide or color swatch specified.
8.8"(W) x 4''(D) x 10''(H)
42"(W) x 34.5" (H)
GRAPHIC DESIGNER: Ramen
PI ENGINEER:
PROJECT ENGINEER:
CS VENDOR: IASIK
SOFTWARE: Illustrator CC
COLOR PROFILE/LPI: Mag CCNB/175lpi
CS DATE: 11/13/2018
PROOF APPROVAL
SIGN OFF
(GRAPHIC):
DATE:
2c outside spine
side panel
THE GAMING RC
Loading...