Mattel Asia Pacific Sourcing DRP30 17 User Manual
DRP30
• Keep this owner’s manual for
future reference, as it contains
important information.
• Requires four AA (LR6) alkaline
batteries (not included) for operation.
• Age: 3-6 years.
• Maximum weight of child: 74 lb (36 kg)
• Always sit on the seat.
• Always wear shoes.
• Only one (1) rider at a time.
• This product is intended for indoor
use only.
• Use ONLY alkaline batteries for longest
battery life.
• Frequency: 2,4 Ghz
1
Frame
Parts
Handlebar
Tablet Stand
2 Bases
(Front and Back)
Seat
Assembly
Adult assembly is required. Required tool:
Phillips screwdriver (not included).
M4,5 x 15 mm Screw - 8
M8 x 76 mm Screw - 1
All Shown Actual Size
Note: Tighten and loosen all screws with a Phillips screwdriver.
Do not over-tighten.
M4,5 x 30 mm Screw - 2
2
Pedal
Assembly
Assembly
Frame
Front Base
1
• Fit the frame to the front base.
Hint: The frame is designed to fit the front base one way. If it does not seem to fit,
try assembling it to the other base.
2
• Turn the assembly over.
• Insert two M4,5 x 15 mm screws into the front base and tighten.
3
Assembly
Seat
Assembly
3
• Fit the seat assembly to the rear base.
Rear Base
4
• Turn the assembly over.
• Insert two M4,5 x 15 mm screws into the rear base and tighten.
4
Assembly
5
• Fit the tube on the seat assembly into the large socket in the frame assembly.
6
• Insert the M8 x 76 mm screw bolt into the frame and the seat assembly tube
and tighten.
5
Assembly
Frame
Connector
Pedal Assembly
Connector
Pedal
Assembly
Frame
Connector
Pedal Assembly
Connector
7
• Fit the pedal assembly into the hole in the frame.
• Make sure the connector on the pedal assembly is fitted to the connector on
the frame.
8
• Insert four M4,5 x 15 mm screws into the pedal assembly and tighten.
6
Loading...