A ROBOTICALLY RECREATED PREDATOR
INTERACTIVE DINOSAUR
INSTRUCTIONS
™
4+
™
Keep these instructions for future reference as they contain
important information.
Requires 3 “AA” alkaline batteries. Batteries included are for
demonstration purposes.
R
N4320-0920
BATTERY INSTALLATION/REPLACEMENT
1. Open battery cover with a Phillips
head screwdriver (not included).
Remove batteries included for
demonstration purposes and
dispose of them safely. [Remove the
two upper batteries. Pull up on the
ribbon to remove the lower battery.]
2. Insert one “AA” battery into the
lowest compartment, in the
orientation shown, on top of ribbon.
3. Install 2 “AA” batteries into top
compartment, in the orientation
shown. Replace battery cover and
tighten screws.
Replace batteries when toy
slows down, stalls, or sounds
become distorted. For best
performance, use only alkaline
batteries.
1
3
BATTERY
COVER
BATTERY
RIBBON
2
GET READY
1. Open the water canister latch.
2. Remove the water canister.
3. Fill canister with water.
2
1
3
4
4. Holding
upright, slide water canister
upward onto tube and close
latch.
Use only water to fill the
water canister. Do not use
any other fluids in the
canister to avoid damaging
SCREATURE™.
SCREATURE
™