Mattel M2708-0920 User Manual
BATTERY SAFETY INFORMATION
In exceptional circumstances batteries may leak fluids that can cause a chemical burn injury or ruin your product.
To avoid battery leakage:
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the product before being charged (if designed to be removable).
• Rechargeable batteries are only to be charged under adult supervision (if designed to be removable).
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
• Do not mix old and new batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the product.
• The supply terminals are not to be short-circuited.
• Dispose of battery(ies) safely.
• Do not dispose of this product in a fire. The batteries inside may explode or leak.
Protect the environment by not disposing of this product with household waste (2002/96/EC).
Check your local authority for recycling advice and facilities.
For product sold in USA
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
INSTRUCTIONS
™
4+
Please keep these instructions for future reference as they contain important information.
CONTENTS
AA
4
Included
INSTRUCTION SHEET
SPECIFICATIONS
KUNG FU PANDA - MASTER MOVES PO
Toy :
Toy No.:
Part No.:
Trim Size:
Folded Size:
Type of Fold:
# colors:
Colors:
Paper Stock:
Paper Weight:
EDM No.:
White Offset
M2708
0920
A4
A5
4
One
Black
70 lb.
NOTE:
Changes or modifications not expressly approved by the manufacturer responsible for
compliance could void the user’s authority to operate the equipment.
Kung Fu Panda ™ & © 2008 DreamWorks Animation L.L.C.
© 2007 Mattel, Inc. All Rights Reserved. Mattel, Inc, 333 Continental Blvd., El Segundo, CA 90245 U.S.A. Consumer
Relations 1 (800) 524-8697. • Mattel Canada Inc., Mississauga, Ontario L5R 3W2. You may call us free at
1-800-524-8697. • Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628500303. • Mattel
Australia Pty Ltd., Richmond, Victoria. 3121. Consumer Advisory Service - 1300 135 312. • Mattel East
Asia Ltd., Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.
• Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.(993532-P) Lot 13.5, Menara Lien Hoe, Persiaran
Tropicana Golf Country Resort, 47410 PJ. Tel:03-78803817, Fax:03-78803867.
M2708-0920
service.mattel.com
Requires 4 "AA" (LR6) alkaline batteries. Batteries included are for demonstration purposes.
Page 1 of 4Page 4 of 4
BATTERY INSTALLATION
• Unscrew the battery cover with a Phillips head screwdriver (not included).
• Remove batteries included for demonstration purposes and dispose of them safely.
• Install 4 "AA" (LR6) alkaline batteries in the orientation (+/-) shown.
• For best performance, use only alkaline batteries.
•Replace battery cover and tighten screw.
• Replace batteries if sounds are garbled or if toy movements are slow.
2
TO PLAY
1
I=ON
O=OFF
Press either button to activate.
If the product does not function properly, move the switch to OFF then ON again to reset.
• Do not play with toy on furniture surfaces.
• Furniture surfaces may be scratched by the toy’s foot.
• Works best on flat, level, hard surfaces such as a linoleum or tile floor.
Page 3 of 4Page 2 of 4
Loading...