Page 1
™
™
GAUNTLET
CONTENTS
1
WARNING: Do not aim at eyes or face. Only use
projectiles supplied with this toy.
Do not fire at point blank range.
Always wear appropriate eye-wear,
sold separately.
™
EPIC BLAST PACK
INSTRUCTIONS
Please keep these instructions for future reference as they contain important information.
CAUTION: Do not aim at eyes or face.
Toy:
Toy No.:
Part No.:
Trim Size:
Folded Size:
Type of Fold:
# colors:
Colors:
Paper Stock:
Paper Weight:
EDM No.:
DATE:
REV. DATE:
TO AVOID INJURY: Use only darts
designed for this product.
Do not modify darts or dart blaster.
Pull rounds apart and stick them
back together!
x 16
TO PLAY1: CLIPFIRE™
2
A. Load darts into barrel and storage.
STORAGE
C. Hold button and fold blaster.
BARREL
Pull clip all the way back, then pull
B.
trigger to fire.
a
NOTE:
Dart must be inserted in
barrel to pull trigger.
Unload the dart when not in use.
D. Clip on the go!
b
a
b
b
a
1
Page 2
™
™
™
GAUNTLET
TO PLAY 2: TWISTED SPINNER™
3
SHIELDS
A. Activate shields.
4
SHIELDS
B. To close shields.
A.
Detach shields as desired.
Click!
TO FIRE
A. Load all darts into spin barrel.
C. Push handle all the way forward
to rotate to next dart.
a
B. Pull handle all the way back to fire.
NOTE: Unload all darts from spin
barrel when not in use.
D.
Pull and push handle all the way forward and
all the way back repeatedly for rapid fire.
b
TO FIRE
2
Page 3
™
™
™
™
GAUNTLET
TO PLAY 3: FARSHOT™ BLASTER
4
SHIELDS
A.
Activate shield.
a
b
TO FIRE
A.
Load darts into barrel and storage.
Click!
B.
Detach shield as desired.
a
b
B.
Pull slide all the way back and release.
STORAGE
BARREL
C.
Pull trigger to fire.
NOTE:
Dart must be inserted in barrel to pull trigger.
Unload dart from barrel and do not pull slide
back when not in use.
3
Page 4
™
GAUNTLET
ATTACHING TARGETS
5
Peel backing off target before sticking it to surface.
Do not stick target to walls or furniture as it
✖
may cause damage to the surface.
REMOVING DARTS & ROUNDS
6
1
IMPORTANT:
Always remove darts and rounds from target
after play. Keep one hand pressed on target,
gently peel round off or hold dart by the tip
and peel off.
REPLACING TARGETS & SHIELDS
8
CLEANING DARTS & ROUNDS
7
Dust, dirt, and other debris can cause darts and
rounds to lose their adhesiveness.
To clean them, rinse darts’ tips and rounds with
tap water or use tape to remove excess debris.
NOTE: Dry darts and rounds before using again.
2
A. Load darts into barrel and storage.
Y8620/BBY17
Replace time-worn targets and shields with
Y8620/BBY17 SMART STICK REFILLS.
Each sold separately, subject to availability.
C. Hold button and fold blaster.
BCR97-0920
©2014 Mattel. All Rights Reserved. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Relations
1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty., Ltd.,
Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance
Centre, Harbour City, Tsimshatsui, HK, China. Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.(993532-P) Lot 13.5, 13th Floor, Menara
Lien Hoe, Persiaran Tropicana Golf Country Resort, 47410 PJ. Malaysia. Tel:03-78803817, Fax:03-78803867.
4
Loading...