Page 1
Dear Customer
Congratulations on purchasing this Matsui Colour Television. We hope that
it will give many years of viewing enjoyment.
This quick set up guide will take you through those first important steps
towards successful viewing.
Check and identify the supplied accessories, and proceed to follow this guide.
P▲
P▼
BASS
TV/
A•B
TXT/TV
Y
?
PP
F
i
X
0
7
1
4
8
5
2
3
6
9
-/--
Remote Control Handset
Batteries for Remote Control
Handset. Type AA or UM3 or R6.
How to use your
Nicam Fastext Television
QUICK SET UP GUIDE
25M3
28M3
Page 2
2
Switching On your TV for the first time
Switching On your TV for the first time
1
This TV set has an automatic self tuning system
called “Plug & Play”. The first time this TV set is
switched on it will automatically begin searching
and storing all available channels in the memory.
Programme positions 1 to 6 are specially prepared
for the following stations in the U.K.
Programme position 1 : BBC1
Programme position 2 : BBC2
Programme position 3 : ITV
Programme position 4 : CH4
Programme position 5 : CH5
Programme position 6 : SKY
If any of these are not available the programme
position will remain vacant. Any remaining channels
that are found will be stored from programme
position 7 onwards in the order that they are found.
In order for “Plug & Play” to operate you must
ensure the following.
1. You have plugged in your TV.
2. You have connected an aerial as described on
the back page, at this stage you do not need to
connect any AV equipment but may do so if you
wish.
You are now ready!
Simply press the mains On/Off button on the front
of the TV set.
The red power indicator will illuminate to show that
the power is on. A message will appear on the
screen while the “Plug & Play” feature is in
operation and various screens will be displayed as
the 6 specified channels are found. Once all
channels have been found the TV returns to
programme position 1.
The installation is now complete!
✎ This procedure will only appear the very first time
the TV set is switched on.
✎ If later you wish to add more channels or to move
their positions refer to the presetting section of
the instruction manual on pages 14~17.
Now I am searching and storing all
programmes Please wait.
Auto Tuning/Sorting
||||||||||||||-----------
Now I am searching and storing all
programmes Please wait.
Auto Tuning/Sorting
ITV found and stored!
NICAM
1
BBC1
This message
appears for 2
seconds when
one of the 6
specified
channels are
found.
Tuning is now
complete.
Page 3
Remote Control Battery Installation
Changing Programme Position
Sound Volume
3
Changing Programme Position
1. Press the P▲ button to step up to the next
programme position.
2. Press the P▼ button to step down to
the previous programme position.
Remote Control Battery Installation
1. Remove the battery cover by
sliding it in the direction of the
arrow.
2. Install two “AA” 1.5 volt
batteries so that the “+” and “-”
marks on the batteries match
the “+” and “-” marks inside the
unit.
3. Close the battery cover.
2
1
2
1
Sound Volume
1. To increase the sound volume, press the
(+) Level button.
2. To decrease the sound volume, press the
(-) Level button.
Page 4
Cable Connection
4
Part No. SKP10213 F7PM/SM
Printed in U.K
FUSED
Back view of a VCR (not supplied)
Aerial connector cable (not supplied)
ANT OUT
ANT IN
ROOF AERIAL (not supplied)
Back view of a VCR (not supplied)
Aerial connector cable (not supplied)
Scart lead (not supplied)
ANT OUT
ANT IN
ROOF AERIAL (not supplied)
FUSED
All connections must be made with both your TV and VCR unplugged from the
mains supply.
Connection by “normal aerial connector” 75Ω coaxial cable
Connection using a Scart cable
AV1
Loading...