Matrix Cleaning Systems SV4 Quick Start Manual
QUICK START GUIDE
MATRIX SV4
SV4
STEAM & VACUUM
4.5 BAR
Quick Start Guide
Get setup and ready to clean
WHAT’S INCLUDED
Mains Power Cable
SV4
Floor Brush
15RM00004
150mm Nozzle
15RM00040
*10 x Nylon
Brushes
15RM00019
* only 5 brushes supplied with machine as standard
11RM00061 (UK)
11RM00062 (EU)
Brush Insert
15RM00005
150mm Brush
15RM00041
*10 x Brass
Brushes
15RM00020
User Manual
Squeegee Insert
15RM00006
150mm Squeegee
15RM00042
Service Kit
SUBA15
Quick Start
Guide
Carpet Insert
15RM00007
Crevice Tool
15RM00043
Glasses Gloves
Lets get started
GET TO KNOW YOUR MACHINE
Collection
Tank
•
•
•
•
Cold water
tank
Handle
Accessory
Basket
2.5 Metre Hose
15RM00001
Window
Squeegee
15RM00008
Long Steam
Lance
15RM00050
2 x Extension
Tubes
15RM00003
Upholstery Tool
15RM00013
Short Steam
Lance
15RM00051
LED temperature
display
WHAT’YOU NEED
Wear safety shoes gloves, goggles and any
•
other PPE as specied by local regulations
•
Areas to clean
•
Please read and comply with the
safety instructions found in the
user manual prior to using the
machine. Retain this document for
future reference. These instruc-
tions are also available on our
website:
www.matrixcleaningsystems.co.uk
On/O switch
•
•
•
•
•
Heater on LED
Steam ready LED
Rell cold
water LED
•
•
Vacuum hose
socket
Steam hose socket
www.matrixcleaningsystems.co.uk
MATRIX CLEANING SYSTEMS LTD, Unit H, Leyland Business Park, Centurion Way,
Farington, Leyland, PR25 3GR, UK Tel: +44 1772 431906 Fax: +44 1772 431902
Page 1 of 2
PREPARE YOUR MACHINE
1. Connect handle to
the back of the machine
using the 4 wing nuts
provided.
6. Lift the ap and
connect the hose
ensuring the pin locks
into position.
2. Leave the top wing
nuts loose for the
basket to be mounted.
7. Push your machine
to a suitable area and
lock the brake lever
to avoid the machine
moving during use.
3. Mount the basket
and tighten wing nuts
fully.
8. Plug your machine
into a suitable power
supply.
4. Using clean cold
water ll the reservoir
and replace cap.
Switching on the machine
5. Connect vacuum
hose, clicking it into
position.Ensure it
cannot be pulled out.
9. Turn ON the
machine with the on/o
switch.
14. Ax your desired
accessory for your
cleaning task and
ensure it is locked into
position.
10. The heater on LED
will illuminate.
15. Rell Cold water
when the rell cold
water light illuminates
and a intermitant
beeping noise can also
be heard.
11. In Approx. 5 mins
the steam ready LED
will illuminate. The
machine is now ready
to be used.
During use
16. If the vacuum
stops suctioning, switch
o the machine and
empty the collection
tank.
•
•
Locking button
Steam trigger
12. The red trigger will
release steam when
pressed. The button will
lock the steam trigger in
the o position.
13. The left hand
switch will activate the
vacuum and the right
hand momentary switch
is inactive on this model.
www.matrixcleaningsystems.co.uk
MATRIX CLEANING SYSTEMS LTD, Unit H, Leyland Business Park, Centurion Way,
Farington, Leyland, PR25 3GR, UK Tel: +44 1772 431906 Fax: +44 1772 431902
Page 2 of 2
Loading...