How it Works
Matrix
Loading...
VS-S75
Owner's Manual
25 pgs10.14 Mb0

Matrix VS-S74, VS-S75 Owner's Manual

VS-S74 Hip Adductor
VS-S75 Hip Abductor
OWNERS MANUAL
ULTRA Single-Station Strength
G7-S74 Hip Adductor and G7-S75 Hip Abductor
Table Of Contents
Safety, General Care & Maintenence ....................................................................................................................3
Installation & Assembly: Value Line
Part 1 Weight Stack & User Frame Assembly .........................................................................................9
Part 2 Arm Assembly ............................................................................................................................... 12
Part 3 ROM Cable Assembly .................................................................................................................... 17
Part 5 Pad Assembly ............................................................................................................................... 20
Part 6 Plastics Assembly .........................................................................................................................23
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INFORMATION
It is the sole responsibility of the purchaser of Matrix products to instruct all individuals, whether they are the end user or supervising personnel on proper usage of the equipment.
It is recommended that all users of Matrix exercise equipment be informed of the following information prior to its use.
PROPER USAGE
Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative that Matrix equipment be used properly to avoid injury.
Keep hands and feet clear at all times from moving parts to avoid injury.
CHECK FOR DAMAGED PARTS
1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied by your country’s local Matrix dealer.
2. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They contain important information. If unreadable or missing, contact your Matrix dealer for a replacement.
3. SECURING EQUIPMENT: All equipment MUST be secured to the floor to stabilize and eliminate rocking or tipping over. This must be performed by a licensed contractor.
4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as keeping your liability to a minimum. Equipment needs to be inspected at regular intervals.
5. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so. Matrix dealers will provide service and maintenance training at our corporate facility upon request.
3
IMPORTANT SAFETY INSTRUCTIONS
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
WARNING: SERIOUS INJURY CAN OCCUR ON THIS EQUIPMENT. FOLLOW THESE PRECAUTIONS TO AVOID INJURY!
1. Never allow children on strength training equipment. Teenagers must be supervised at all times while using this equipment.
2. All warnings and instructions should be read and proper instruction obtained prior to use.
3. Use this equipment for its intended purposes only.
4. NEVER allow resistance straps, ropes or other means be attached to this equipment, as this may result in serious injury.
5. NEVER use this equipment for support during stretching, as this may result in serious injury.
6. Cease exercise if you feel faint or dizzy. Obtain a medical exam before beginning an exercise program.
7. Keep body, hair, clothing and accessories free and clear of all moving parts.
8. Inspect the machine before use. DO NOT use machine if it appears damaged or inoperable.
9. Check to see that the selector pin is completely inserted into the weight stack.
10. NEVER use this machine with the weight stack pinned in an elevated position.
11. NEVER use dumbells or other means to incrementally increase the weight resistance. Only use the means provided directly from the manufacturer.
12. This equipment should only be used in supervised areas where access and control are regulated by the owner.
4
EXERCISE PLACARD | PRODUCT SPECIFICATIONS | MAINTENANCE CHECKLIST
EXERCISE PLACARD
PRODUCT SPECIFICATIONS
TECH SPECS
Maximum User Weight 136 kg / 300 lbs.
Maximum Training Weight 109 kg / 240 lbs.
Product Weight 271 kg / 598 lbs.
Overall Dimensions (L x W x H)
Adductor: 172.4 x 164.1 x 129.6 cm / 67.9" x 64.6" x 51.0" Abductor: 172.4 x 128.5 x 129.6 cm / 67.9” x 50.6” x 51.0”
GETTING STARTED
WARRANTY (Valid in USA only)
Frame (not coatings) 10 years
Weight stacks 5 years
Pulleys 5 years
Pivot bearings 5 years
Any items not specified 3 years
Labor (excluding upholstery/cables/grips) 3 years
Upholstery/cables/grips/springs 1 year
Accessories 6 months
MAINTENANCE CHECKLIST
ACTION FREQUENCY
Clean Upholstery Daily
Inspect Cables Daily
Clean Guide Rods Monthly
Inspect Hardware Monthly
Inspect Frame Bi-Annually
Clean Machine As Needed
Clean Grips As Needed
Lubricate Guide Rods As Needed
Upholstery & Grips should be cleaned with a non-ammonia based cleaner or a mild soap and water. Guide rods should be lubricated with Teflon based lubricant. Apply the lubricant to a cotton cloth and then apply up and down the guide rods.
5
ASSEMBLY
UNPACKING | TOOLS REQUIRED
UNPACKING
Thank you for purchasing a Matrix product. This machine is an EN957-1 and EN957-2 compliant Class S product. Your Matrix product is inspected before it is packaged. It is shipped in multiple pieces to facilitate the compact packaging of the machine. Prior to assembly, confirm all the components by matching them with the exploded diagrams. Carefully unpack the unit from this box and dispose of the packing materials in accordance with your local laws.
CAUTION
The weight of the product is 598 lbs. (271 kg) not including the weight stack. The weight stack for this machine is 240 lbs. (109 kg). To avoid injury to yourself and prevent damage to the frame components, be sure to have proper assistance removing the frame pieces from this box. Please be sure to install the equipment on a stable base, properly level the machine and leave at least two feet of clearance to enter and exit the machine. Maximum user weight for this machine is 300 lbs.
TOOLS REQUIRED FOR ASSEMBLY
3MM L-Shaped Allen Wrench 4MM L-Shaped Allen Wrench 5MM L-Shaped Allen Wrench 6MM L-Shaped Allen Wrench 8MM L-Shaped Allen Wrench 10MM L-Shaped Allen Wrench Phillips & Standard Screwdrivers 8MM Open-End Wrench 13MM Open-End Wrench 17MM Open-End Wrench. 19MM Open-End Wrench Adjustable Wrench
Blue Locktite 242 must be used on all fasteners that are not assembled with Nylock Nuts.
6
MARKINGS
WARNING LABEL LOCATIONS
7
Parts List
ID
1 User Frame 1 2 M10 X 30L Socket Head Cap Screw 8 3 M10 Flat Washer (Abductor) 14
4 Weight Stack 1 5 M8 X 20L Flat Head Cap Screw 4 6 Foot Plate 1 7 M10 Nylock Nut 1 8 Large Pivot Cap 2
9 CAM 1 10 M10 X 105L Socket Head Cap Screw 1 11 Wave (Spring) Washer 2 12 Axle 2 13 Right Arm Assembly (With ROM Pin) 1 14 Spacer 1 15 ROM Plate 1 16 M5 X 12L Socket Head Cap Screw 8 17 M5 Flat Washer 6 18 Cap 2
DESCRIPTION
QTY
(16)
19 Axle Locking Sleeve 2 20 Left Arm Assembly 1 21 ROM Adjustment Cable 2 22 Handlebar Assembly 1 23 M8 Flat Washer 4 24 M8 X 20L Socket Head Cap Screw 4 25 M10 X 75L Button Head Cap Screw 2 26 Back Pad Assembly 1 27 M10 X 20L Button Head Cap Screw 4 28 Pad 1 29 Thigh Pad 2 30 M10 X 20L Socket Head Cap Screw (Abductor) 6 (8) 31 M10 X 20L Bumper Bolts (Adductor only) 2 32 Left Front Shroud 1 33 Rear Shroud 1 34 Right Front Shroud 1 35 M8 X 60L Socket Head Cap Screw 4
8
36 Top Cap 1
Loading...
+ 17 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use