Matrix stepper Owner's Manual
S3x_OM_090507.indd 1 5/5/09 2:14 PM
S3x_OM_090507.indd 2 5/5/09 2:14 PM
CHAPTER 1: IMPORTANT SAFETY INSTRUCTIONS PAGES
1.1 Read and Save These Instructions .................................................................. 01
1.2 Setting up the Stepper .................................................................................. 01
1.3 Installation Requirements .............................................................................. 01
1.4 Preventative Maintenance and Cleaning Tips ................................................... 02
CHAPTER 2: USING MANAGER PREFERENCE
2.1 Using Manager Mode .................................................................................... 02
2.2 Using CSAFE ................................................................................................ 03
2.3 Console (back side) Access Layout .................................................................. 03
CHAPTER 3: SERIAL NUMBER LOCATION
3.1 Stepper ................................................................................................................ 03
CHAPTER 4: USING THE STEPPER
4.1 Pausing the Unit ................................................................................................... 04
4.2 Console Description ............................................................................................... 04
4.3 Manual Operation .................................................................................................. 04
4.4 Operating Level Based Programs ............................................................................. 04
4.5 Fit Test ................................................................................................................. 05
4.6 Heart Rate Control ................................................................................................. 06
4.7 Constant Watts ...................................................................................................... 06
CHAPTER 5: STEPPER SPECIFICATIONS, PARTS AND ASSEMBLY GUILDS
5.1 Stepper Specifications .............................................................................................. 07
5.2 Fasteners and Assembly Tools ................................................................................. 08
5.3 Assembly Steps ................................................................................................... 08
5.4 Optional Entertainment Accessory ........................................................................... 12
S3x_OM_090507.indd 3 5/5/09 2:14 PM
S3x_OM_090507.indd 4 5/5/09 2:14 PM
1
CAUTION: If you experience chest pain, nausea, dizziness or
shortness of breath, STOP exercising immediately and consult a
physician before continuing.
1.2 SETTING UP THE STEPPER
Assembly instructions have been provided with your Stepper. For your
safety, please read and follow each of the steps in the assembly guide.
1.3 INSTALLATION REQUIREMENTS
Your M atrix S teppe r is d esigned to be self contained and d oes not
re qui re a po we r su pp ly t o o per ate . I t ha s a n inte rna l b att ery to
initialize and display the workout readout or information while stepping
to a stop. The unit’s battery is recharged every time you exercise for
a reasonable period of time.
CAUTION
: Use of the wrong power supply for the enter-
tainment device may cause damage to your Stepper and/or entertainment device.
Locate a level, stable surface to position the Stepper. The Stepper has
leveling feet located under the foot support. If your Stepper wobbles in
the location where you intended to use it, loosen the lock nut on the
adjust ing foot and adjust the fe et until stable. Once level, lock the
adjusting feet by tightening the lock nut to the frame.
1.4 BATTERY CHARGE
The Stepper saves its battery charge by moving into a shutdown
mode whenever STEP FASTER appears on the display. If the user
does not maintain a step rate above 35 steps per m inute, then a
30-sec ond shutdown process begins.
When the battery voltage is low, LOW BATTERY appears on the display if
the unit is moving into the shutdown mode. The following situation is
the time to recharge the battery:
•
If no one has used the unit for an extended period of time, the battery
may need recharging.
•
The unit continues to function with a low battery, however, user
and program information is lost once the user stops.
If the battery must be recharged, use the optional power adapter
charging unit. The charger should be connected to the Stepper
for a minimum of eight hours to ensure a thorough charge. After
a completion of charge, the battery light turns from red into green
(see illustration). If LOW BATTERY still appears on the display in a
full of charging, the battery could be extinct. Please check with an
authorized service technician for replacing the battery.
CAUTION
: The battery stored inside the unit contains
hazardous materials to the environment. Proper disposal of the battery
is required by the local law.
READ AND SAVE
THESE INSTRUCTIONS
• This stepper is intended for commercial use
• To insure your safety and protect the equipment, read all instructions
before operating the MATRIX Stepper.
• Unsupervised Children must be kept away from this equipment
When using an electrical product, basic precautions should always be
followed, including the following:
• Always unplug this equipment from the electrical outlet immediately after
using and before cleaning.
Your MATRIX stepper is self-generating (requiring no external power source)
and must be pedaled to power up the console.
The battery needs to be charged for 3-4 hours when first installed. Until the
battery is fully charged, the 30 second pause feature may not function fully.
The charging does not need to be continuous for 3-4 hours, but over
combined workouts equaling 3-4 hours.
WARNING: To reduce the risk of burns, fire, electrical shock or
injury to persons that may be associated with using this product:
• An appliance should never be left unattended when plugged in.
Unplug the entertainment equipment from outlet when not in
use and before putting on or taking off parts.
• This product must be used for its intended purpose described
in this Owner’s Guide. Do not use other attachments that are
not recommended by the manufacturer. Attachments may
cause injury.
• To prevent electrical shock, never drop or insert any object
into any opening.
• Do not remove side covers. Service should only be done by an
authorized service technician.
• Never operate the Stepper with the air opening blocked. Keep
the air opening clean, free, of lint, hair and the like.
• Never operate the product if it has a damaged cord or plug, if
it is not working properly, if it has been damaged, or immersed
in water.
Return the unit to a service center for examination and repair.
• Do not carry this unit by entertainment equipment poser cord
or use cord as handle.
• Keep any of the entertainment equipment power cords away
from heated surfaces
• Keep hands and loose clothing away from moving parts.
• Close supervision is necessary when the Stepper is used by or
near children or disabled persons.
• Do not use outdoors.
• Do not operate where aerosol (spray) products are being used
or where oxygen is being administered.
• Connect this Stepper to a properly grounded outlet only.
• To disconnect, turn all entertainment controls to the off
position, then remove plug from outlet.
CHAPTER 1: I
mportant Safety Instructions
1.1
S3x_OM_090507.indd 1 5/5/09 2:14 PM
2
P0: Maximum Time
P1: Default Time
P2: Default Level
P3: Default Weight
P4: English / Matric
P5: Machine
P6: Cardio Entertainment
P7: Accumulated Distance
P8: Accumulated Time
P9: Language
P10: Software Version
P11: Error Log
CHAPTER 2: U
sing manager preference
CHAPTER 1: I
mportant safety instructions
1.5 PREVENTATIVE MAINTENANCE AND CLEANING TIPS
Preventative maintenance and daily cleaning will prolong the life and look of
your Matrix Stepper.
Please read and follow these tips:
• Position the equipment away from direct sunlight. The intense UV light can
cause discoloration of plastics.
• Locate your equipment in an area with cool temperatures and low humidity
• Clean with a soft, 100% cotton cloth
• Clean with soap and water or other non-ammonia based all
purpose cleaners.
• Wipe handles, heart rate grips and handlebars clean after each use.
• Do not pour liquids directly onto your equipment. This can cause damage
to the equipment and in some cases electrocution.
• Adjust leveling feet when equipment wobbles or rocks.
• Maintain a clean area around equipment free from dust and dirt.
2.1 USING MANAGER PREFERENCE MODE
Your Matrix Stepper is designed to allow you to customize settings for your
preferences and diagnostics. The Manager Mode can only be accessed while
the Stepper is powered up. Follow the instructions to adjust the Stepper
computer to your desired setting.
STEP 1: Power up the Stepper and hold the UP and DOWN ARROW KEYS
for 3 seconds. The word “Manager” will appear in the alphanumeric window and will enter into the Manager setting automatically
after 3 seconds. Continue to step until finished.
STEP 2: Select information you would like to view or change from the
following list by using the UP or DOWN ARROWS. Press SELECT.
Manager mode will allow you to view and set the following:
STEP 3: Use UP or DOWN ARROWS to increase or decrease values.
STEP 4: Press START to save and enter selected values and exit to STEP 2.
STEP 5: Exit by pressing START. Screen will reset to start up.
S3x_OM_090507.indd 2 5/5/09 2:14 PM
Loading...