Matrix SETU VG, SETU VG8, SETU VG4 Quick Start Manual
SETU VG
Quick Start
SETU VG
Multi-Port VoIP to GSM Gateway
Quick Start
Documentation Disclaimer
Matrix Comsec reserves the right to change, at any time, without prior notice, the product design,
specifications, components, as engineering and manufacturing may warrant.
This is a general documentation for all models/configurations of the product. The product may not
support some of the features/facilities described in this document.
While every reasonable effort has been made to ensure accuracy of content in this document,
Matrix Comsec assumes no responsibility for errors or omissions that may occur herein. No
liability is assumed for damages, costs, expenses resulting from unauthorized modifications or
repairs to the product; failure to use information or to comply with the installation, operation and
maintenance instructions contained in this document.
Copyright
All rights reserved. No part of this quick start may be copied or reproduced in any form or by any
means without the prior written consent of Matrix Comsec.
Version V1
Release date: December 28, 2016
Contents
Know Your SETU VG ..................................................................................... 1
Overview .......................................................................................................... 1
Installing SETU VG ......................................................................................... 3
Before You Start ................................................................................................ 3
Getting Started .................................................................................................. 3
Connecting SETU VG ..................................................................................... 5
Power ON SETU VG ......................................................................................... 8
Accessing Jeeves (GUI) .............................................................................. 11
Connecting a Computer .................................................................................. 11
Configuring SETU VG .................................................................................. 15
Using the Wizard ............................................................................................. 15
Using Selective Configuration ......................................................................... 16
Table of Contents i
ii Table of Contents
Know Your SETU VG
Antenna
SIM Card Slots
Reset Button
WAN Port
LAN Port
DC Power Jack
Thank you for choosing the Matrix SETU VG. Please read the instructions in this Quick Start to
install and operate SETU VG.
This Quick Start is meant to help you install and configure the basic parameters of the system. For
Advanced configuration and feature description, please refer the SETU VG System Manual
available Online. To download, click http://www.matrixtelesol.com/technical-document.html
Overview
.
SETU VG is available in two configurations:
• SETU VG8 with 9 SIP Trunks and 8 Mobile Ports.
• SETU VG4 with 9 SIP Trunks and 4 Mobile Ports.
Matrix SETU VG Quick Start 1
Ports and Connectors
Port Connector Description
SMA (Male) To connect Antenna for the Mobile Ports.
SIM Card Slots
(SIM1 to SIM8)
Reset Button --- To restart the system or to restore the default LAN IP Address.
WAN Port RJ45
LAN Port RJ45 To connect a computer or a LAN Switch.
12VDC-2A DC Jack To connect 12VDC, 2A Power Adapter.
a. When the 3G module is installed in the system, you must disable Call Waiting on the SIM before insert-
ing it into the system to prevent current calls from being disconnected.
---
To connect to GSM/UMTS networka.
To connect to the IP network over a DSL Modem or Router or a
LAN Switch.
LEDs
SETU VG has a Power LED (PWR), a Status LED (STS) and eight Port LEDs. By default,
• In SETU VG8, the Port LEDs M1 to M8 are assigned to Mobile Port 1 to Mobile Port 8
respectively.
• In SETU VG4, the Port LEDs M1 to M4 are assigned to Mobile Port 1 to Mobile Port 4
respectively. The LEDs M5 to M8 cannot be assigned to any port.
The LEDs indicate the status of the ports and various events occurring on the ports,
including errors
.
If required, to each port LED—M1 to M8 in SETU VG8 and M1 to M4 in SETU VG4—you may reassign a port of your choice. To know more, see Port LED topic under Maintenance in the System
Manual.
SETU VG is easy to install and operate. The built-in web server, Jeeves, allows you to configure
the system parameters and features On-site as well as from a remote location.
2 Matrix SETU VG Quick Start
Loading...