Disclaimer
Matrix Comsec reserves the right to change, at any time, without prior notice, the
product design, specifications, components, as engineering and manufacturing may
warrant.
This is a general documentation for all models/configurations of the product. The
product may not support some of the features/facilities described in this document.
While every reasonable effort has been made to ensure accuracy of content in this
document, Matrix Comsec assumes no responsibility for errors or omissions that
may occur herein. No liability is assumed for damages, costs, expenses resulting
from unauthorised modifications or repairs to the product; failure to use information
or to comply with the installation, operation and maintenance instructions contained
in this document.
Copyright
All rights reserved. No part of this document may be copied or reproduced in any
form or by any means without the prior written consent of Matrix Comsec.
Version 2
Release date: February 2, 2011
http://ArtTel.ru
SETU ATA211G
VoIP-FXS-GSM Adaptor
Quick Start
Package Contents
• SETU ATA211G with Antenna
• Adapter 12V, 1.25 Amp
• Ethernet Cables (RJ45)
• Two wall mounting screws and screw grips
• Warranty Card
• External Antenna SMA with Cable
• Quick Start and User Card
• CD (System Manual, Quick Start and User Card)
http://ArtTel.ru
4
Thank you for choosing SETU ATA211G! Please read the instructions in this Quick
Start to install and configure the basic settings.
Connecting SETU ATA211G
Select an appropriate site and mount SETU ATA211G.
Do not install the system at the places where shocks or vibrations are frequent or strong.
Use only the power adapter included in the SETU ATA211G package. Using an alternative nonqualified power adapter may possibly damage the unit.
• Connect a standalone PC/ LAN Switch to the LAN Port of SETU ATA211G
using the Ethernet cable.
• Connect the WAN Port of SETU ATA211G to the IP Network—A DSL modem/
router or LAN Switch—using the Ethernet cable.
DSL Modem/
Router
PC/LAN
IP
Power
Adaptor