OWNER’S
REHAB SYSTEM
MANUAL
ROM3 Rehab System Owner’s Manual
Assembly steps and instructions
BEFORE YOU BEGIN
Prior to assembling the unit, unpack all of the contents of the box and make sure that all
NEED HELP?
Contact Customer
Tech Support
to report any
missing items.
866-754-7089
necessary components are present. Review the contents of the hardware package for
completeness.
To ensure correct assembly of the unit, carefully read and follow all assembly steps.
TOOLS REQUIRED
8 mm Allen Wrench Adjustable Wrench
PARTS INCLUDED
• 2 Pedals
• 2 Discs
• 2 Pedal Blocks
(left and right)
right pedal
block
right disc
right pedal
left pedal
left pedal
block
left disc
2
STEP 1 – Attaching the discs to the bike
ROM3 Rehab System Owner’s Manual
a. Place one disc onto the spindle with the “A” channel up
c. Place the other disc onto the other spindle with the “A”
(Fig.1b).
b. Securely tighten it with the 8 mm Allen wrench.
d. Securely tighten it with the 8 mm Allen wrench.
(Clockwise)
g. 1a
g. 1b g. 1c
spindle
Right Side: “A” Channel up
STEP 2 – Attaching the pedals to the pedal blocks
a. Start with the LEFT pedal block.
b. Fit it onto the “A” Channel of the disc with the words
“TOP LEFT” up (see Fig. 2a)
c. Pull the pin release and let the pedal block be secured
into the hole in the channel.
d. Take the LEFT pedal and screw it into the pedal block
COUNTERCLOCKWISE (see Fig. 2b)
e. Take the RIGHT pedal block.
f. Fit it onto the “A” Channel of the disc with the words
g. Pull the pin release and let the pedal block be secured
h. Take the RIGHT pedal and screw it into the pedal block
Assembly is now complete. The bike is now ready
for operation.
channel pointing downward (Fig. 1c).
(Clockwise)
Left Side: “A” Channel down
“TOP RIGHT” up (see Fig. 2c)
into the hole in the channel.
CLOCKWISE (see Fig. 2c).
g. 2a g. 2b g. 2c
Fit pedal block into the “A” Channel
and pull the pin release to secure.
Screw left pedal into the “TOP LEFT”
pedal block COUNTERCLOCKWISE.
Screw right pedal into the “TOP
RIGHT” pedal block CLOCKWISE.
3
ROM3 Rehab System Owner’s Manual
Basic operation and usage
Basic usage
Please refer to the cycle Owner’s Manual and the ROM3 Protocol regarding use
of the bike.
Technical
Service Contact
Information
For questions
on patient protocol
and medical matters.
Phone:
866-754-7089
Email:
info@rom3rehab.com
Technical Information
Table showing the length of the radius in each pedal position.
Pedal Position Radius in Inches Radius in CM
1 1.7 4.3
2 2.7 6.8
3 3.7 9.4
4 4.7 12.0
5 5.7 14.5
6 6.7 17.0
Table showing the rotational distance (circumference) in each pedal position.
Rotational
Pedal Position
1 10.6 27.0
2 16.9 42.7
3 23.2 59.0
4 29.4 75.3
5 35.7 91.0
6 41.9 106.7
Circumference
in Inches
Rotational
Circumference
in Centimeters
4
© 2015 ROM3 California LLC. All rights reserved. ROM3 is a registered trademark.
Loading...