Matrix MX-T5x, MX-T4x Owner's Manual
TREADMILL
OWNER’S MANUAL
1.0 IMPORTANT SAFETY INSTRUCTIONS
Proper Usage
Check for Damaged Parts
1.1 Important Safety Instructions
1.2 Electrical Requirements
1.3 Grounding Instructions
2.0 SETTING UP THE TREADMILL
2.1 Unpacking Treadmill
2.2 Contents
2.3 Optional Equipment
3.0 OVERLAY DESCRIPTION AND CUSTOM SETTING
3.1 The Console
3.2 Manager Club Settings
3.3 Manager Screen Description
3.4 Manager Screens Exceptions/Details
3.5 USING CSAFE
4.0 MAINTENANCE
4.1 Recommended Cleaning Tips
4.2 Deck and Belt Replacment
4.3 Adjusting the Belt
5.0 USING THE PROGRAMS
5.1 Introduction to the Programs
5.2 Run Time Program Screens Descriptions
6.0 OPERATING THE PROGRAMS
6.1 Manual Operation
6.2 Operating Level Based Programs
6.3 Heart Rate Controlled Programs
7.0 EQUIPMENT SPECIFICATIONS
8.0 ASSEMBLY
8.1 Assembly Instructions
1
1
1
2
2
3
3
3
3
4
4
4
4
5
6
7
7
7
7
8
8
8
10
10
10
10
11
12
12
TABLE OF CONTENTS
It is the sole responsibility of the purchaser of Matrix Fitness Systems products to instruct
all individuals, whether they are the end user or supervising personnel on proper usage of
the equipment.
It is the recommended that all users of Matrix Ftiness Systems exercise equipment be
informed of the following information prior to its use.
PROPER USAGE
Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative that all Matrix Fitness Systems equipment are used properly to
avoid injury.
Keep hands and feet clear at all times from moving parts to avoid injury.
Unsupervised children must be kept away from this equipment.
Do not wear dangling loose clothing while on equipment.
CHECK FOR DAMAGED PARTS
DO NOT use any equipment that is damaged and or has worn or broken parts. Use only
replacement parts supplied by Matrix Fitness Systems.
MAINTAIN LABELS AND NAMEPLATES. Do not remove labels for any reason. They contain important infromation. If unreadable or missing, contact Matrix Ftiness Systems for
a replacement.
MAINTAIN ALL EQUIPMENT Preventative maintenance is the key to smooth operating
equipment as well as keeping the users liability to a minimum. Equipment needs to be
inspected at regular intervals. Defective components must be replaced immediately.
Improperly working equipment must be kept out of use until it is repaired.
Ensure that any person making adjustments or performing maintenance or repair of any
kind is qualified to do so. Matrix Fitness Systems will provide service and maintenance
training at our corporate facility upon request or in the field if proper arrangements are
made.
1.1 IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCIONS
This Treadmill is intended for commercial use
To insure your safety and protect the equipment, read all instructions before operating the
MATRIX treadmill.
When using an electrical product, basic precautions should always be followed, including
the following:
DANGER To reduce the risk of electric shock:
Always unplug this equipment from the electrical outlet immediately after using and before
cleaning.
WARNING To reduce the risk of burns, fire, electrical shock or injury to persons that may
be associated with using this product:
An appliance should never be left unattended when plugged in. Unplug from outlet when
not in use and before putting on or taking off parts.
This product must be used for its intended purpose described in this Owner’s Guide. Do
not use other attachments that are not recommended by the manufacturer. Attachments
may cause injury.
To prevent electrical shock, never drop or insert any object into any opening.
Do not remove the side covers. Service should only be done by an authorized service technician.
Never operate the Treadmill with the air opening blocked, Keep the air opening clean, free
of lint, hair and the like.
Never operate product if it has damaged cord or plug, if it is not working properly, if it
has been damaged, or immersed in water. Return the unit to a service center for examination and repair.
Do not carry this unit by supply cord or used cord as handle.
Keep any power cord away from heated surfaces.
Keep hands and loose clothing away from moving parts.
Close supervision is necessary when Treadmill is used by or near children, invalids, or disabled persons.
Do not use outdoors.
Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
To disconnect, turn all controls to the off position, then remove plug from outlet.
Comment this Treadmill to a properly grounded outlet only.
CAUTION If you experience chest pain, nausea, dizziness or shortness of breath, STOP exercising immediately and consult a physician before continuing.
1.0 IMPORTANT SAFETY INSTRUCTIONS
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
1
..
..
..
..
..
..
..
1.2 ELECTRICAL REQUIREMENTS
For your safety and treadmill performance, Matrix Fitness Systems’ treadmill require a dedicated 20 amp circuit. The ground on this circuit must be non-looped. Please refer to NEC
article 210-21 and 210-23. Your Treadmill is provided with a power cord with a plug listed below and requires the listed outlet. Any alterations of this power cord could void all warranties of this product.
DANGER Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or serviceman if the user are in doubt as
to whether the product is properly grounded. Do not modify the plug provided with the product if it will not fit the outlet; have a proper outlet installed by a qualified technician.
120V UNITS DESIGNATED FOR U.S. MARKETS
The Matrix T5x Treadmill is for use on a nominal 120-volt circuit and has a non looped
grounding plug. Make sure that the 110V treadmill is connected to an outlet, NEMA 5-20R,
having the same configuration as the plug. No adapter should be used with this product.
220V UNITS DESIGNATED FOR U.S. MARKETS OR OTHER COUNTRIES
The Matrix T5x/T4x Treadmill is for use on a nominal 220-volt circuit and has a non looped
grounding plug. Make sure that the 220V treadmill is connected to an outlet, NEMA 6-20R,
having the same configuration as the plug. No adapter should be used with this product.
( * ) MATRIX T4x IS ONLY FOR THE INTERNATIONAL MARKET.
1.0 IMPORTANT SAFETY INSTRUCTIONS
2
120 20A OUTLET NEMA 5-20R
120 20A OUTLET NEMA 6-20R
120 20amp Plug NEMA 5-20R
120 20amp Plug NEMA 6-20R
The above electrical requirements are only for the U.S. market.
1.3 GROUNDING INSTRUCTIONS
The Matrix T5x/T4x* Treadmill must be grounded. If it should malfunction or breakdown,
grounding provides a path of least resistance for electric current to reduce the risk of electric shock. The treadmill is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. If the user
do not follow these Grounding Instructions, the user could void the Matrix limited warranty.
2.1 UNPACKING THE TREADMILL
The MATRIX tradmill is inspected before it is packaged. It is shipped in two separate packages: the frame and the console. Carefully unpack the unit and dispose of the box material.
CAUTION This unit weights 450 lbs / 204 kgs pounds. Be sure to have proper assistance
to remove and move the unit, to avoid injury to the user and the unit.
2.2 CONTENTS
Frame
1. Treadmill Base
2. Console Supports
3. Hardware Fasteners and Washer Bag
Console
1. Handle Bar Set
2. Console
If and items are missing please contact MATRIX FITNESS SYSTEMS customer service at
1-866-MXFITNESS. For the international market, please contact your local authorized dealers.
2.3 OPTIONAL EQUIPMENT
Optional equipment may be available for the users of MATRIX product. Please visit our web
site at www.matrixfitness.com for more information.
2 .0 SETTING UP THE TREADMILL
3
Loading...