MX-FW80 MULTI ADJUSTABLE BENCH
ASSEMBLY GUIDE
PROPER USAGE
1. Do not use any equipment in any way other than designed or intended by the manufacturer.
It is imperative that weight stack machines as well as any other MATRIX Fitness Systems, Inc. equipment are used properly
to avoid injury.
2. Keep hands and feet clear at all times from moving parts to avoid injury.
CHECK FOR DAMAGED PARTS
1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied by
MATRIX Fitness Systems, Inc.
2. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They contain important information.
If unreadable or missing, contact your local dealer for a replacement.
3. SECURING EQUIPMENT: All equipment MUST be secured to the floor to stabilize and eliminate rocking or tipping over.
This must be performed by a licensed contractor.
4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as keeping your
liability to a minimum. Equipment needs to be inspected at regular intervals.
5. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so.
MATRIX Fitness Systems, Inc. will provide service and maintenance training at our corporate facility upon request.
SPECIFIC OPERATING WARNINGS
1. Routinely inspect all accessory clips that join attachments to the machine and replace at the first sign of wear.
2. Use only weight selector pins supplied by MATRIX Fitness Systems, Inc. on weight stacks. Substitutes are forbidden.
3. Belts and cables pose an extreme liability if used when frayed. Always replace any belts and cables at first sign of wear
(consult MATRIX Fitness Systems, Inc. if uncertain).
4. Do not allow users to wear loose fitting clothing while using equipment. It is also recommended to have users' secure long
hair back and up to avoid contact with moving parts.
5. Fully insert weight selector pins. Partial insertion can cause weights to fall unexpectedly.
Never remove selector pin if any weights are suspended. Never attempt to release jammed weights or parts.
IMPORTANT SAFETY INSTRUCTIONS
PARTS DESCRIPTIONS
Sep 24, 2004
FITNESS SYSTEM
B02
B38
B39
B40
C03
C04
C05
C10
C14
C15
C16
C17
C18
C19
C20
C21
C22
C23
C24
C25
C26
C27
C28
2
1
1
1
1
1
1
2
2
2
2
4
4
4
1
2
3
1
1
2
2
2
4
J01
J02
J03
J04
J05
J06
J08
J10
J11
J14
J19
J20
J21
J22
J23
J25
J27
J28
J29
J30
V12
Z01
Z02
1
1
1
2
2
1
1
1
1
1
12
4
2
12
12
2
2
1
2
4
2
1
1
SN1102001E
MJ4803023K
ME1120001D
MB0258001H
MJ2315001B
MJ2316001C
MJ2901025D
MJ3915001B
MB06D6001C
MJ3329002B
MB0103004F
MD0501002
ME0902006
ME0112132
MB0304026E
MB0314001A
ME0111022
MJ4212001C
MB0420001C
ME0112161
ME0502182AB
ME0501027
MD0504016
Adjustment Pin Assembly
Pull Pin
Spring
Pull Pin Cover
Back Fixing Bracket
Front Fixing Bracket
Main Support Bracket
Pull Pin Housing
Pull Pin Knob
Wheel Shaft
Wheel
Bearing
C-Clip
Screw
Molded Rubber Foot 89mm
Foot Pad
Bolt, Round-Hex Socket
Axle
Grip
Screw
Flat Washer
Spring Washer
Bushing
SWP
S45C
SPC 6.0t
SPC 6.0t
SPC
SS41
TPR
Q235
6002ZZ(SKF)
S-15
M8×1.25P×25L
M8×1.25P×20L
(SCM-21) 20×144L
31.8×5.0t×105L
M10×1.5P×15L
10.2× 25×1.5t
SW10 10.2×18.4×2.5t
LFF-2015
MJ2304002D
MJ2319001C
SW3019001C
MJ4213001F
MJ2908003B
MJ2320001H
MJ4214001G
MJ2322001D
MJ2323001D
MJ2325001F
ME0112144
ME0112159
ME0104070AB
ME0502027AC
ME0501016
MB06D3003E
MB06D4008AA
MJ4827002D
ME0114060A
ME0112024AE
ME1201002
ME1007031A
ME1007024A
Seat Bracket
Middle Seat Bracket
Handle
Rotation Housing
Attachment Plate
Back Bracket
Back Rotation Housing
Seat Adjustment Plate
Seat Adjustment Bracket
Back Adjustment Bracket
Screw
Screw
Bolt, Round-Head Allen
Flat Washer
Spring Washer
Rubber Detent Bolt Cover
Back Stop
Annodized Grip End Cap, 31mm
Set screw
Screw
Rivet
Wrench
Wrench
SPC 5.0t
SPC 5.0t
31.8×3t×154L
SS41
SPC 6.0t
SPC 5.0t
SS41
SPC 12.0t
SPC 10.0t
SPC 10.0t
M10×1.5P×25L
M8×1.25P×25L
M8×1.25P×12L
8.4× 15.5×2.0t
SW8 8.2×15.4×2t
M6×1.0P×4L
M8×1.25P×20L
1/8"×7.5L
M6×80L
M5×70L
FITNESS SYSTEM
ASSEMBLY GUIDE
MX-FW80 MULTI ADJUSTABLE BENCH
EXPLODED VIEW
UNPACKING MULTI ADJUSTABLE BENCH
Your MATRIX MX-FW80 Multi Adjustable Bench is inspected before it is packaged.
Carefully unpack the unit and dispose of the box material.
CAUTION
This unit weight 50 kgs. Be sure to have proper assistance to remove and move the unit, to avoid injury to you
and the unit.
◎If any items are missing please contact your Country's Local Matrix Dealer for futher assistance.
Loading...