Matrix G7-S40, G7-S73 Instructions Manual

G7 SINGLE-STATION STRENGTH

BICEPS CURL

MAT RIX F ITN ESS S YSTE MS | 16 00 LA NDM ARK D RIV E COT TAGE G ROV E W I 535 27 USA

To ll Fr ee

86 6.6 93.4 863

ma tr ix fi tne ss .c om Fa x

6 08. 83 9.86 87

PAR T # 00 000 882 10

REV. 1.3

TRICEPS PRESS PLACARD

ACTION FREQUENCY

Clean Upholstery Daily

Inspect Cables Daily

Clean Guide Rods Monthly

Inspect Hardware Monthly

Inspect Frame Bi-Annually

Clean Machine As Needed

Clean Grips As Needed

Lubricate Guide Rods As Needed

Upholstery & Grips should be cleaned with a non-ammonia based cleaner (like Simple Green) or a mild soap and water.

Guide rods should be lubricated with Teflon based lubricant. Apply the lubricant to a cotton cloth and then apply up and

down the guide rods.

MAINTENANCE CHECKLIST

PRODUCT SPECIFICATIONS

TECH SPECS

Overall dimensions 53”L X 67”W x 52”H

Weight 553 lbs

Shipping weight 602 lbs

WARRANTY (Valid in USA only)

Frame (not coatings) 10 years

Structural parts 10 years

Weight stacks 5 years

Pulleys 5 years

Pivot bearings 5 years

Any items not specified 3 years

Labor (excluding upholstery/cables/grips) 3 years

Upholstery/cables/grips/springs 1 year

IMPORTANT SAFETY INFORMATION

It is the sole responsibility of the purchaser of MATRIX Fitness Systems products to instruct all individuals, whether they

are the end user or supervising personnel on proper usage of the equipment.

It is recommended that all users of MATRIX Fitness Systems exercise equipment be informed of the following information

prior to its use.

PROPER USAGE

Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative that MATRIX

Fitness Systems equipment be used properly to avoid injury.

Keep hands and feet clear at all times from moving parts to avoid injury.

CHECK FOR DAMAGED PARTS

1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied by

your country’s local MATRIX Fitness Systems dealer.

2. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They contain important information.

If unreadable or missing, contact your MATRIX Fitness Systems dealer for a replacement.

3. SECURING EQUIPMENT: All equipment MUST be secured to the floor to stabilize and eliminate rocking or tipping over.

This must be performed by a licensed contractor.

4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as keeping

your liability to a minimum. Equipment needs to be inspected at regular intervals.

5. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so.

MATRIX Fitness Systems dealers will provide service and maintenance training at our corporate facility upon request.

WARNING: SERIOUS INJURY CAN OCCUR ON THIS EQUIPMENT. FOLLOW THESE PRECAUTIONS TO

AVOID INJURY!

1. Never allow children on selectorized strength equipment. Teenagers must be supervised at all times while using

this equipment.

2. All warnings and instructions should be read and proper instruction obtained prior to use.

3. Cease exercise if you feel faint or dizzy. Obtain a medical exam before beginning an exercise program

4. Keep body, hair, clothing and fitness accessories free and clear of all moving parts.

5. Inspect the machine before use. DO NOT use machine if it appears damaged or inoperable.

6. Check to see that the selector pin is completely inserted into the weight stack.

7. NEVER use the machine with the weight stack pinned in an elevated position.

8. Never use dumbbells or other means to incrementally increase the weight resistance. Only use the means provided

directly from the manufacturer.

9. This equipment should only be used in supervised areas where access and control are regulated by the owner.

bicep_curl_090916.indd 1 9/16/09 11:48 AM

G7-S40 BICEPS CURL

UNPACKING G7-S40 BICEPS CURL

Thank you for purchasing a MATRIX Fitness product. This machine is an EN957-1 and E9576-2 complaint Class S product. Your
MATRIX G7-S40 BICEPS CURL is inspected before it is packaged. It is shipped in multiple pieces to facilitate the compact
packaging of the machine. Prior to assembly, confirm all the components by matching them with the exploded diagrams. The
weight stack is shipped in separate packaging to reduce the weight of this box. Carefully unpack the unit from this box and
dispose of the packing materials in accordance with your local laws.

CAUTION

The weight of the G7-S40 BICEPS CURL is 553 lbs. (251 kg) not including the weight stack. The weight stack tower is packaged
completely assembled for ease of installation; use extra caution when removing from its pallet during assembly. The weight stack
for this machine is 200 lbs. (91 kg). To avoid injury to yourself and prevent damage to the frame components, be sure to have
proper assistance removing the frame pieces from this box.

INCLUDED TOOLS REQUIRED FOR ASSEMBLY

3MM L-Shaped Allen Wrench
4MM L-Shaped Allen Wrench
5MM L-Shaped Allen Wrench
6MM L-Shaped Allen Wrench
8MM L-Shaped Allen Wrench
10MM L-Shaped Allen Wrench
Phillips Screwdriver
8MM Open-End Wrench
17MM Open-End Wrench

If any items are missing please contact your country’s local MATRIX dealer for assistance.

0mm 10 20 30 40 50 60 70 80 90 100 1

10 120 130 140 150 160

Step 1

Lift the aluminumn wing and top cover,
then take apart the front and rear sheilds.
Q11 bolts won't be used anymore for the
wing and cover re-assembly.

60

Q11

Q11

Item Description Qty
B22 Flat Washer(M10) 18
B23 Nut(M10)

Z02 Screw (M10X30L)

Z04 Lock Washer(M10) 14

Z05 Screw (M10X90L)
Z23 Arc-Flat Washer
Z11 Screw (M10X75L) 4

6

2

12

6

Z23

Z02

Z23

Z02

B22

Z04

Z11

B22

Z04

B22

Z11

Z04

Z11

B23

B22

B22

B23

B23

B22

B23

B22

Z02

Z02

Z02

Z23

Z23

Z02

Z04

B22

Z04

B22

Z02

Z04

B22

Z02

Z02

B22

Z04

B23

Z23

B23

Z23

Z05
Z04
B22

Step 2

F11

B23

B23

F06

F05

Take apart from the cam

Z16

Z15

C17

Z01

Z15

F06

F05

B23

B23

F11

F13

B23

F12

B25

Z02

B25

F12

Z10

Z07

Z09

Z08

F13

F11

B23

F06

F05

B23

F13

Z01

Z07

Z09

Z08

C17

Z16

F12

B25

B44

B44

B44

B44

B44

B44

B44

B44

B44

B44

Z10

Z44

D18

D18

2

Item

Qty

2

C17 Cover

Z09 Washer(M6)

Z08 Flat Washer(M6)

Z07 Screw (M6X12L)

Z01 Screw (M10X25L)

F13 Stopper plate

F12 Button Screw (M10X40L)

F11 Cap Nut (M10)

Z10 Screw (M10X45L)

F06 Screw (M8)

F05 Cam Stopper Rubber

B25 Flat Washer(M8)

B23 Nut(M10)

Z15 External C type clamp S-25

2

2

2

2

2

2

2

2

4

2

2

2

2

6

Description

B44 Flat Washer(M10)

10

Z44 Screw (M10X30L)

Z16 Washer;φ26.0xφ35.0x0.3t
D18 Cap

4

Step 3

J20

J18

C30

C17

C30

C17

C30

C17

C17

C30

C30

C30

C30

J35

J32

J20

C30

C17

C17

J18

C17

C17

J33

J32

8

8

4
2
4

C17

C30

J18
J20
J32 Shaft

Swirl Spring

Connect Rod

Screw (M8x25L)

Pulley Cover

Item

Description

Qty

Step 4

Z03

Z03

Seat Pad

Back Pad

Z04

Z04

Item Description Qty

2

Z03 Screw (M10X20L) 4

Screw (M10X75L)Z17

Step 5

Rubber Pad

Fixing Plate

Adjustable

Q02

Q03

Q04

60

Z12

Z12

Z12

Z12

Item

Description

Qty

Lift the wing and top cover ,then assemble
the front and rear shields to the frame.

Screw (M8X60L)

4

Q02

Right-Front Shield

1

Q03

Rear Shield

1

Q04

Left-Front Shield

1

Z12

bicep_curl_090916.indd 2 9/16/09 11:48 AM