G7 SINGLE-STATION STRENGTH
CALF EXTENSION
MAT RIX F ITN ESS S YSTE MS | 16 00 LA NDM ARK D RIV E COT TAGE G ROV E W I 535 27 USA
To ll Fr ee
86 6.6 93.4 863
ma tr ix fi tne ss .c om Fa x
6 08. 83 9.86 87
PAR T # 00 000 882 10
REV. 1.4
CALF EXTENSION PLACARD
ACTION FREQUENCY
Clean Upholstery Daily
Inspect Cables Daily
Clean Guide Rods Monthly
Inspect Hardware Monthly
Inspect Frame Bi-Annually
Clean Machine As Needed
Clean Grips As Needed
Lubricate Guide Rods As Needed
Upholstery & Grips should be cleaned with a non-ammonia based cleaner (like Simple Green) or a mild soap and water.
Guide rods should be lubricated with Teflon based lubricant. Apply the lubricant to a cotton cloth and then apply up and
down the guide rods.
MAINTENANCE CHECKLIST
PRODUCT SPECIFICATIONS
TECH SPECS
Overall dimensions 59”L X 45”W x 57”H
Weight 575 lbs
Shipping weight 617 lbs
WARRANTY (Valid in USA only)
Frame (not coatings) 10 years
Structural parts 10 years
Weight stacks 5 years
Pulleys 5 years
Pivot bearings 5 years
Any items not specified 3 years
Labor (excluding upholstery/cables/grips) 3 years
Upholstery/cables/grips/springs 1 year
IMPORTANT SAFETY INFORMATION
It is the sole responsibility of the purchaser of MATRIX Fitness Systems products to instruct all individuals, whether they
are the end user or supervising personnel on proper usage of the equipment.
It is recommended that all users of MATRIX Fitness Systems exercise equipment be informed of the following information
prior to its use.
PROPER USAGE
Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative that MATRIX
Fitness Systems equipment be used properly to avoid injury.
Keep hands and feet clear at all times from moving parts to avoid injury.
CHECK FOR DAMAGED PARTS
1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied by
your country’s local MATRIX Fitness Systems dealer.
2. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They contain important information.
If unreadable or missing, contact your MATRIX Fitness Systems dealer for a replacement.
3. SECURING EQUIPMENT: All equipment MUST be secured to the floor to stabilize and eliminate rocking or tipping over.
This must be performed by a licensed contractor.
4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as keeping
your liability to a minimum. Equipment needs to be inspected at regular intervals.
5. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so.
MATRIX Fitness Systems dealers will provide service and maintenance training at our corporate facility upon request.
WARNING: SERIOUS INJURY CAN OCCUR ON THIS EQUIPMENT. FOLLOW THESE PRECAUTIONS TO
AVOID INJURY!
1. Never allow children on selectorized strength equipment. Teenagers must be supervised at all times while using
this equipment.
2. All warnings and instructions should be read and proper instruction obtained prior to use.
3. Cease exercise if you feel faint or dizzy. Obtain a medical exam before beginning an exercise program
4. Keep body, hair, clothing and fitness accessories free and clear of all moving parts.
5. Inspect the machine before use. DO NOT use machine if it appears damaged or inoperable.
6. Check to see that the selector pin is completely inserted into the weight stack.
7. NEVER use the machine with the weight stack pinned in an elevated position.
8. Never use dumbbells or other means to incrementally increase the weight resistance. Only use the means provided
directly from the manufacturer.
9. This equipment should only be used in supervised areas where access and control are regulated by the owner.
calf_extension_091118.indd 1 11/23/09 2:00 PM
G7-S57 CALF EXTENSION
UNPACKING G7-S57 CALF EXTENSION
Thank you for purchasing a MATRIX Fitness product. This machine is an EN957-1 and EN957-2 complaint Class S product. Your
MATRIX G7-S57 CALF EXTENSION is inspected before it is packaged. It is shipped in multiple pieces to facilitate the compact
packaging of the machine. Prior to assembly, confirm all the components by matching them with the exploded diagrams. The
weight stack is shipped in separate packaging to reduce the weight of this box. Carefully unpack the unit from this box and
dispose of the packing materials in accordance with your local laws.
CAUTION
The weight of the G7-S57 CALF EXTENSION is 376 lbs. (171 kg) not including the weight stack. The weight stack tower is
packaged completely assembly for ease of installation; use extra caution when removing from its pallet during assembly. The
weight stack for this machine is 199 lbs. (90 kg). To avoid injury to yourself and prevent damage to the frame components, be
sure to have proper assistance removing the frame pieces from this box.
INCLUDED TOOLS REQUIRED FOR ASSEMBLY
3MM L-Shaped Allen Wrench
4MM L-Shaped Allen Wrench
5MM L-Shaped Allen Wrench
6MM L-Shaped Allen Wrench
8MM L-Shaped Allen Wrench
10MM L-Shaped Allen Wrench
Phillips Screwdriver
8MM Open-End Wrench
17MM Open-End Wrench
If any items are missing please contact your country’s local MATRIX dealer for assistance.
0mm 10 20 30 40 50 60 70 80 90 100 1
10 120 130 140 150 160
Step 1
Q11
Q11
Q11
Q11
60
Item Description Qty
Screw (M10X75L)
Flat Washer(M10)
NUT (M10)
Lock Washer(M10)
Connect Detail
Z05
Lift the aluminumn wing and top cover,
then take apart the front and rear sheilds.
Q11 bolts won't be used anymore for the
wing and cover re-assembly.
AG2
B22
B23
B22
AG1
AC2
B22 20
B23
Z06
Z04 8
Arc-Flat WasherZ11 8
10
Screw (M10X30L)Z05 6
Z12 Screw (M10X170L) 2
Z11
B23
Z05
B22
B22
Z06
Z05
B23
Z11
Z06
Z04
Z04
Z04
Z06
B22
B23
B23
B22
Z06
B22
Z06
B22
B22
B22
Z04
B23
B22
Z06
B23
B22
B23
B22
Z06
Z04
Z04
Z06
B22
Z11
Z05
Z11
Z05
Z11
Z05
Z12
Z11
Z11
Z12
Z11
12
Step 2
Item Description Qty
Linear Bearing Detail
Z08
Z20
Z17
Z21
Z20
Z20
Z20
Z21
Z17
Z17
Z21
Z17
Z21
AJ1
Z20 16Screw (M6X20L)
Z21 Screw (M6X15L) 8
Z08 Screw (M6X8L) 1
Z17 Washer (M6) 8
Z15X 4
Z16X 4
Z18X 4
Z16
Z18
Z15 Flat Washer (M8) 4
4Lock Washer (M8)
Screw (M8X20L) 4
Step 3
Item Description Qty
Cable Detail
1F01 Cable
C42 Pin 1
Z01 1E-Clip (E-4)
Z01
C42
F01
B30
B22
Z07
1
1
1
B22
Z07 Screw (M10X45L)
Flat Washer (M10)
B30 Pulley
Step 4
Item Description Qty
Q02
Q03
Q04
60
1
4
1
1
Q02
Q03
Q04
Right-Front Shield
Rear Shield
Left-Front Shield
Screw (M8X60L)
2
Lift the wing and top cover ,then assemble
the front and rear shields to the frame.
Z13 Screw (M10X75L)
Z14 Screw (M10X15L) 4
Pad and Cover Detail
Z09
Z09
Z09
Z09
Z09
Z14
Z13
Z13
calf_extension_091118.indd 2 11/23/09 2:00 PM
Loading...