Page 1
OWNERS MANUAL
AURA Single-Station Strength
G3-S75 Hip Abductor
AURA_G3_S75_r1.1.indd 1 12/18/12 9:16 AM
Page 2
GETTING STARTEDIMPORTANT SAFETY INSTRUCTIONS
PRODUCT SPECIFICATIONS | MAINTENANCE CHECKLIST
IMPORTANT SAFETY INFORMATION
It is the sole responsibility of the purchaser of Matrix products to instruct all individuals, whether they are the end user or supervising
personnel on proper usage of the equipment.
It is recommended that all users of Matrix exercise equipment be informed of the following information prior to its use.
PROPER USAGE
Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative that Matrix equipment be
used properly to avoid injury.
Keep hands and feet clear at all times from moving parts to avoid injury.
CHECK FOR DAMAGED PARTS
• DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied by your country’s
local Matrix dealer.
• MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They contain important information.
If unreadable or missing, contact your Matrix dealer for a replacement.
• SECURING EQUIPMENT: All equipment MUST be secured to the floor to stabilize and eliminate rocking or tipping over. This must be
performed by a licensed contractor.
• MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as keeping your liability to a
minimum. Equipment needs to be inspected at regular intervals.
• Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so.
Matrix dealers will provide service and maintenance training at our corporate facility upon request.
WARNING: SERIOUS INJURY CAN OCCUR ON THIS EQUIPMENT. FOLLOW THESE
PRECAUTIONS TO AVOID INJURY!
• Never allow children on strength training equipment. Teenagers must be supervised at all times while using this equipment.
• All warnings and instructions should be read and proper instruction obtained prior to use.
• Use this equipment for its intended purpose ONLY.
• NEVER allow resistance straps, ropes or other means to be attached to this equipment, as this may result in serious injury.
• NEVER use this equipment for support during stretching, as this may result in serious injury.
• Cease exercise if you feel faint or dizzy. Obtain a medical exam before beginning an exercise program.
• Keep body, hair, clothing, and fitness accessories free and clear of all moving parts.
• Inspect the machine before use. DO NOT use machine if it appears damaged or inoperable.
• Check to see that the selector pin is completely inserted into the weight stack.
• NEVER use the machine with the weight stack pinned in an elevated position.
• NEVER use dumbbells or other means to incrementally increase the weight resistance. Only use the means provided directly from the
manufacturer.
• This equipment should only be used in supervised areas where access and control are regulated by the owner.
PRODUCT SPECIFICATIONS
TECH SPECS
Overall dimensions 60”L x 27”W x 59”H (152cm x 69cm x 150cm)
Weight 560 lbs (254 kg)
Shipping weight 655 lbs (297 kg)
WARRANTY (Valid in USA only)
Frame (not coatings) 10 years
Structural parts 10 years
Weight stacks 5 years
Pulleys 5 years
Pivot bearings 5 years
Any items not specified 3 years
Labor (excluding upholstery/cables/grips) 3 years
Upholstery/cables/grips/springs 1 year
MAINTENANCE CHECKLIST
ACTION FREQUENCY
Clean Upholstery Daily
Inspect Cables Daily
Clean Guide Rods Monthly
Inspect Hardware Monthly
Inspect Frame Bi-Annually
Clean Machine As Needed
Clean Grips As Needed
Lubricate Guide Rods As Needed
Upholstery & Grips should be cleaned with a non-ammonia based cleaner (like Simple Green) or a mild soap and water.
Guide rods should be lubricated with Teflon based lubricant. Apply the lubricant to a cotton cloth and then apply up and
down the guide rods.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other
reproductive harm.
2 3
AURA_G3_S75_r1.1.indd 2-3 12/18/12 9:16 AM
Page 3
ASSEMBLYASSEMBLY
10 120 130 140 150 160
Step 1
Step 3 Step 5
Description
Sketch
Screw (M10x25L)
Item
Qty
D42 x13
13
D42
Belt & Cable Routing Detail
Item
F24
F22
F06
Screw
Lock Washer
ASSEMBLY STEPSUNPACKING | TOOLS REQUIRED
UNPACKING
Thank you for purchasing a Matrix product. This machine is an EN957-1 and E957-4 complaint Class S product. Your Matrix
product is inspected before it is packaged. It is shipped in multiple pieces to facilitate the compact packaging of the
machine. Prior to assembly, confirm all the components by matching them with the exploded diagrams. The weight stack is
shipped in separate packaging to reduce the weight of this box. Carefully unpack the unit from this box and dispose of the
packing materials in accordance with your local laws.
CAUTION
The weight of the product is 560 lbs. (254 kg) not including the weight stack. The weight stack tower is packaged
completely assembled for ease of installation; use extra caution when removing from its pallet during assembly. The weight
stack for this machine is 220 lbs. (100 kg). To avoid injury to yourself and prevent damage to the frame components, be
sure to have proper assistance removing the frame pieces from this box. Please be sure to install the equipment on a stable
base, properly level the machine and leave at least two feet of clearance to enter and exit the machine. Maximum user
weight for this machine is 300 lbs.
INCLUDED TOOLS REQUIRED FOR ASSEMBLY
3MM L-Shaped Allen Wrenchv
4MM L-Shaped Allen Wrench
5MM L-Shaped Allen Wrench
6MM L-Shaped Allen Wrench
8MM L-Shaped Allen Wrench
10MM L-Shaped Allen Wrench
Phillips Screwdriver
8MM Open-End Wrench
17MM Open-End Wrench
G35 x20
G34 x16
STEP 1 | INSTRUCTIONS
G38 x4
G33 x16
If any items are missing please contact your country’s local Matrix dealer for assistance.
0mm 10 20 30 40 50 60 70 80 90 100 1
Allen Head
Cap Screw
Lock
Washer
Arc-at
Washer
G33
G34
G35
G37
G38
Description
Flat Washer (M10)
Lock Washer (M10)
Screw (M10x25L)
Arc-at Washer (M10)
Hex Screw (M10x30L)
Sketch
QtyItem
16
16
20
8
4
Flat Washer
4 5
AURA_G3_S75_r1.1.indd 4-5 12/18/12 9:16 AM
Page 4
Step 2
Step 6Step 4
Accessory Detail
Description
Sketch
Screw (M10x25L)
Item
Qty
Weight Stack Detail
Flat Washer
Arc-at
Washer
Lock
Washer
QtyItem
Description
G35
G34
G37
G33
Sketch
Lock Washer (M10)
Flat Washer (M10)
Screw (M10x25L)
Arc-at Washer (M10)
16
16
20
8
Allen Head
Cap Screw
13
D42
2
K07
Rubber Stack Cushions
E-Clipper (E-15)
Allen Head Cap Screw (M8 X 30L)
K13
B28
2
4
Description
Sketch
Knurled Belt Securing Insert
Item
K05
Qty
1
L09
Screw
, Oval-Hex Socket (M8 X 20L)
2
K18
Flat W
asher (M8)
2
Lock W
asher (M8)
2
4
4
4
Screw
, Oval-Hex Socket (M5 X 16L)
Lock W
asher (M5)
Flat W
asher (M5)
L11
F24
F25
L14
Knurled Belt
Securing Insert
10
Top Weight
Selector Pin
Screw
Guide Rod
Guide Sleeve
INCREMENTAL
WEIGHT
K07 x2
K05 x1
K13 x4
B28 x2
L09 x2
L11 x2
K18 x2
L14 x4
F25 x4
F24 x4
130
220
280
265
295
235
250
175
190
205
145
160
100
115
55
70
85
25
40
10
Description
Item
Allen Head Cap Screw
Belt Fixer
Flat Washer
Lock Washer F25
F24
F22
F06
Screw, Oval-Hex Socket G31
Q06 x6
Weight Shield
B43 x6
B51 x6
Upper Cover x2
G38
Hex Screw (M10x30L)
4
Step 3 Step 5
Belt & Cable Routing Detail
Description
Sketch
Item
Qty
Allen Head Cap Screw
Belt Fixer
Flat Washer
Lock Washer F25
F24
F22
F06
4
2
4
4
4
Screw, Oval-Hex Socket G31
Screw
Flat Washer
Belt
Lock Washer
Belt Fixer
G31
F22
F25
F24
F06
BELT
ASSEMBLYASSEMBLY
ASSEMBLY STEPSASSEMBLY STEPS
STEP 3 | INSTRUCTIONS STEP 2 | INSTRUCTIONS
D41
D41 x2
H30 x2
H24 x2
H12 x2
D21 x2
D26 x1
D47 x1
D18 x1
CABLE - D17
E10 x8
D44 x2
Item
B28
L10
L11
D21
D44
D41
H30
H24
H12
Description
Screw (M8x30L)
Flat Washer (M8)
Lock Washer (M8)
Bushing
Set Screw (M5x25L)
Screw (M5x10L)
Flat Washer (M12)
Lock Washer (M12)
Screw (M12x25L)
Sketch
Cam Stopper D26
E10
Nylon Nut (M8)
Screw D47
6 7
SpacerD18
Qty
1
1
1
B28 x8
L11 x8
L10 x8
8
8
8
2
2
2
2
2
2
8
Item
D42 x13
Description
D42
Screw (M10x25L)
Sketch
Qty
13
AURA_G3_S75_r1.1.indd 6-7 12/18/12 9:16 AM
Page 5
Step 6Step 4
Accessory Detail
Description
Sketch
Screw (M10x25L)
Item
Qty
13
D42
Description
Sketch
Item
Qty
Allen Head Cap Screw
Belt Fixer
Flat Washer
Lock Washer F25
F24
F22
F06
4
2
4
4
4
Screw, Oval-Hex Socket G31
Screw (M8 X 30L)
B43
Screw (M4 X 12L)
B28
Rubber T
ip W eight Shield Bolt
Rubber Shield Spacer
Q05
Q06
Internal Tooth Lock WasherB51
2
6
6
6
6
Item
Description
Sketch Qty
B47
Screw (M8 X 18L)
2
B28 x2
B47 x2
Bottle Holder
Towel / Water
Description
Panel
Q06 x6
Weight Shield
B43 x6
B51 x6
Upper Cover x2
G31
F22
F25
F24
F06
ASSEMBLYASSEMBLY
ASSEMBLY STEPSASSEMBLY STEPS
Weight Stack Detail
K05 x1
INCREMENTAL
WEIGHT
K18 x2
L09 x2
L11 x2
10
25
40
55
70
85
100
115
130
145
160
175
190
205
220
235
250
265
280
295
K13 x4
L14 x4
F25 x4
F24 x4
B28 x2
K07 x2
Item
B28
F24
K05
K07
K13
K18
L09
L11
F25
L14
Description
Allen Head Cap Screw (M8 X 30L)
Flat W
Knurled Belt Securing Insert
Rubber Stack Cushions
E-Clipper (E-15)
Flat W
Screw
Lock W
Lock W
Screw
Knurled Belt
Securing Insert
Top Weight
asher (M5)
asher (M8)
, Oval-Hex Socket (M8 X 20L)
asher (M8)
asher (M5)
, Oval-Hex Socket (M5 X 16L)
10
Sketch
Guide Sleeve
Guide Rod
Screw
Selector Pin
Qty
2
4
1
2
4
2
2
2
4
4
Belt & Cable Routing Detail
Screw
Lock Washer
Item
F06
F22
F24
Flat Washer
Belt Fixer
F22
F25
F24
F06
Description
Belt Fixer
Allen Head Cap Screw
Lock Washer F25
Flat Washer
Screw, Oval-Hex Socket G31
Belt
Sketch
Qty
2
4
4
4
4
STEP 5 | INSTRUCTIONS STEP 4 | INSTRUCTIONS
BELT
G31
8 9
AURA_G3_S75_r1.1.indd 8-9 12/18/12 9:16 AM
Page 6
Step 6Step 4
Description
Sketch
Item
Qty
Allen Head Cap Screw
Belt Fixer
Flat Washer
Lock Washer F25
F24
F22
F06
4
2
4
4
4
Screw, Oval-Hex Socket G31
Lock Washer
G31
F22
F25
F24
F06
BELT
ASSEMBLY
ASSEMBLY STEPS
STEP 6 | INSTRUCTIONS
Accessory Detail
B51 x6
B43 x6
Upper Cover x2
ASSEMBLY
ASSEMBLY STEPS
B28 x2
Q06 x6
Weight Shield
B47 x2
Description
Panel
Item
B28
B43
B47
Q05
Q06
Towel / Water
Bottle Holder
Description
Screw (M8 X 30L)
Screw (M4 X 12L)
Screw (M8 X 18L)
Rubber Shield Spacer
Rubber T
ip W eight Shield Bolt
Internal Tooth Lock WasherB51
Sketch Qty
2
6
2
6
6
6
ASSEMBLY COMPLETE!
10 11
AURA_G3_S75_r1.1.indd 10-11 12/18/12 9:16 AM
Page 7
Matrix Fitness
1600 Landmark Drive
Cottage Grove WI 53527
matrixfitness.com
Toll-free 866.693.4863
Fax 608.839.8687
AURA Hip Abductor Owners Guide Rev 1.1© 2012 Matrix Fitness
AURA_G3_S75_r1.1.indd 12 12/18/12 9:16 AM
Loading...