Matrix G3-S10 User Manual

G3 STRENGTH

G3-S10 CHEST PRESS

MAT RIX F ITN ESS | 1 600 L AND MA RK DR IVE CO TTA GE GRO VE WI 53 527 U SA

To ll Fr ee

86 6.6 93.4 863

ma tr ix fi tne ss .c om Fa x

6 08. 83 9.86 87

PAR T # MH 020 451 5B

REV. 2.1

ACTION FREQUENCY

Clean Upholstery Daily

Inspect Cables Daily

Clean Guide Rods Monthly

Inspect Hardware Monthly

Inspect Frame Bi-Annually

Clean Machine As Needed

Clean Grips As Needed

Lubricate Guide Rods As Needed

Upholstery & Grips should be cleaned with a non-ammonia based cleaner (like Simple Green) or a mild soap and water.

Guide rods should be lubricated with Teflon based lubricant. Apply the lubricant to a cotton cloth and then apply up and

down the guide rods.

MAINTENANCE CHECKLIST

PRODUCT SPECIFICATIONS

TECH SPECS

Overall dimensions 61”L X 49”W x 73”H (155 cm x 124.5 cm x 185.4 cm)

Weight 603.5 lbs (274 kg)

Shipping weight 650 lbs (295 kg)

WARRANTY (Valid in USA only)

Frame (not coatings) 10 years

Structural parts 10 years

Weight stacks 5 years

Pulleys 5 years

Pivot bearings 5 years

Any items not specified 3 years

Labor (excluding upholstery/cables/grips) 3 years

Upholstery/cables/grips/springs 1 year

IMPORTANT SAFETY INFORMATION

It is the sole responsibility of the purchaser of MATRIX Fitness Systems products to instruct all individuals, whether they

are the end user or supervising personnel on proper usage of the equipment.

It is recommended that all users of MATRIX Fitness Systems exercise equipment be informed of the following information

prior to its use.

PROPER USAGE

Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative that MATRIX

Fitness Systems equipment be used properly to avoid injury.

Keep hands and feet clear at all times from moving parts to avoid injury.

CHECK FOR DAMAGED PARTS

1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied by

your country’s local MATRIX Fitness Systems dealer.

2. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They contain important information.

If unreadable or missing, contact your MATRIX Fitness Systems dealer for a replacement.

3. SECURING EQUIPMENT: All equipment MUST be secured to the floor to stabilize and eliminate rocking or tipping over.

This must be performed by a licensed contractor.

4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as keeping

your liability to a minimum. Equipment needs to be inspected at regular intervals.

5. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so.

MATRIX Fitness Systems dealers will provide service and maintenance training at our corporate facility upon request.

WARNING: SERIOUS INJURY CAN OCCUR ON THIS EQUIPMENT. FOLLOW THESE PRECAUTIONS TO

AVOID INJURY!

1. Never allow children on freeweight or bench equipment. Teenagers must be supervised at all times while using

this equipment.

2. All warnings and instructions should be read and proper instruction obtained prior to use.

3. Cease exercise if you feel faint or dizzy. Obtain a medical exam before beginning an exercise program

4. Keep body, hair, clothing and fitness accessories free and clear of all moving parts.

5. Inspect the machine before use. DO NOT use machine if it appears damaged or inoperable.

6. This equipment should only be used in supervised areas where access and control are regulated by the owner.

S10_chest_press_r2.1.indd 1 12/13/10 9:00 AM

G3-S10 CHEST PRESS

UNPACKING G3-S10 CHEST PRESS

Thank you for purchasing a MATRIX Fitness product. This machine is an EN957-1 and EN957-2 complaint Class S product. Your
MATRIX G3-S10 CHEST PRESS is inspected before it is packaged. It is shipped in multiple pieces to facilitate the compact
packaging of the machine. Prior to assembly, confirm all the components by matching them with the exploded diagrams. Carefully
unpack the unit from this box and dispose of the packing materials in accordance with your local laws.

CAUTION

The weight of the G3-S10 CHEST PRESS is 603.5 lbs. (274 kg) including the weight stack. To avoid injury to yourself and prevent
damage to the frame components, be sure to have proper assistance removing the frame pieces from this box. Please be sure to
install the equipment on a stable base, properly level the machine and leave at least two feet of clearence to enter and exit the
machine. Maximum user weight for this machine is 300 lbs. (136 kg).

INCLUDED TOOLS REQUIRED FOR ASSEMBLY

6MM L-Shaped Allen Wrench
8MM L-Shaped Allen Wrench
10MM L-Shaped Allen Wrench
17MM Open-End Wrench

If any items are missing please contact your country’s local MATRIX dealer for assistance.

0mm 10 20 30 40 50 60 70 80 90 100 1

10 120 130 140 150 160

Step 1

Frame Detail

Arc-at Washer
Flat Washer(M10)

Screw (M10X25L)

G13

G12

D32

G14

8

16
24

Qty

16

Item

D32

G14

Description

G12

G13

G14

Screw

Flat Washer

Flat Washer

Screw

Screw

Arc-at Washer

Spring Washer(M10)

Spring Washer

Spring Washer

Step 2

Input Detail

D30

D16

H16

D22

D17

D16

D16

D17

H16

D22

D20

D20

D31

D16

Input Arm

Flat Washer

Screw

Screw

Flange Bushing

Flange Bushing

Input Arm Detail

D17

D16

D20

D22

Item Description

Screw (M12X25L)

Flat Washer(M12)
Lock Washer(M12)
Wavy Washer

Qty

2
2

2

D30
D31
H16

Bolt(M12X110L)

Flange Bushing

Nylon Nut(M12)11

2

4

Step 3

Upholstery Detail

Item Description Qty

11G11 Screw (M10X25L)

G11

G11

Step 6

Accessory Detail

Qty

6

6

2

6

2

4

6

1

1
2

Water Bottle Holder

DescriptionItem

Screw (M8X30L)
Screw (M4X12L)
Description panel
Screw(M8X18L)
Internal Tooth Lock Washer(M4)
Weight Shield
Upper Cover
Rubber Shield Spacer
Rubber Tip Weight Shield Bolt(M8X40L)

B24
B26
B43
B46
B47
B51
Q01
Q02
Q05
Q06

Upper Cover

Towel / Water
Bottle Holder

AB1

B46

B47

Q01

Q06

Q05

Weight Shield

Q02

B51

B43

B26

B24

Step 4

Weight Stack Detail

K12

K12

L14
F19
F18

B26

K07

AL1

K18

L11

L09

K05

Top Plate Detail

Item Description Qty
B26 Screw (M8x30L) 2
F18 Flat Washer (M5) 4
F19 Lock Washer (M5) 4
K05 Knurled Belt Securing Insert 1
K07 Rubber Stack Cushions 2
K12 E-Clipper 4
K18 Flat Washer (M8) 2
L09 Screw (M8x20L) 2
L11 Lock Washer (M8) 2
L14 Screw (M5x16L) 4

Knurled Belt
Securing Insert

Guide Rod

Guide Sleeve

Screw

Selector Pin

Top Weight

Step 5

Belt Routing Detail

F01

AF4

AF1

AF4

F02

F03

F18
F19
F13

1. Firstly, to use that shorter belt to cross ccover, and then to
x the small cam to ensure the belt xation plate is at the top
of the cam and at level. Secondly, to tighten the belt before
xing the xation plate on the other side. At the meantime,
keep around 30mm uncovering on two sides of the belt.
Finally, to x cam cover.

2. To x one side of the other belt at the botton of the big cam
rstly and then tighten the belt. Secondly, to x the other side
of the belt by xation pin. At the meantime, to keep around
30mm uncovering on two sides of the belt.

F02

Lock Washer (M5)

Flat Washer (M5)

Screw (M5x35L)

Belt Fixer

Belt

F13

12

12

12

1

Qty

1

6

F19

F18

F01

Item Description

F03

Belt

Lock Washer

Belt Fixer

Belt

Screw

Flat Washer

S10_chest_press_r2.1.indd 2 12/13/10 9:00 AM