Matrix G3-MS52, G3-MS51, G3-MS24, G3-MS53, G3-MS20 User Manual

AURA

SERIES

G3-MS24
G3-MS51

G3-MS52
G3-MS53

G3-MS20
G3-MS40

G3-MS50
G3-MS80

2

3

IMPORTANT SAFETY INFORMATION

It is the sole responsibility of the purchaser of MATRIX products to instruct all
individuals, whether they are the end user or supervising personnel on proper usage of
the equipment.

It is recommended that all users of MATRIX exercise equipment be informed of the
following information prior to its use.

Do not use any equipment in any way other than designed or intended by the
manufacturer. It is imperative that MATRIX equipment be used properly to avoid injury.

INSTALLATION

1. STABLE AND LEVEL SURFACE: MATRIX exercise equipment must be installed on a
stable base and properly leveled.

2. SECURING EQUIPMENT: Manufacturer recommends that all stationary MATRIX

strength equipment be secured to the oor to stabilize equipment and eliminate

rocking or tipping over. This must be performed by a licensed contractor.

All anchor points must be able to withstand 750 lbs. (3.3 kN) pull-out force.

MAINTENANCE

1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use
only replacement parts supplied by your country’s local MATRIX dealer.

2. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They
contain important information. If unreadable or missing, contact your MATRIX
dealer for a replacement.

3. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth
operating equipment as well as keeping your liability to a minimum. Equipment
needs to be inspected at regular intervals.

4. Ensure that any person(s) making adjustments or performing maintenance or

repair of any kind is qualied to do so. MATRIX dealers will provide service and

maintenance training at our corporate facility upon request.

ADDITIONAL NOTES

This equipment should only be used in supervised areas where access and control is

specically regulated by the owner. It is up to the owner to determine who is allowed

access to this training equipment. The owner should consider a user’s: degree of
reliability, age, experience, etc.

This training equipment meets industry standards for stability when used for its
intended purpose in accordance with the instructions provided by the manufacturer.

This training equipment is in compliance with EN 957-1 and the relevant portions of EN
957-2 and EN 957-4.

WARNING

General Selectorized

DEATH OR SERIOUS INJURY CAN OCCUR ON THIS
EQUIPMENT. FOLLOW THESE PRECAUTIONS TO AVOID
INJURY!

1. Keep children under the age of 14 away from this
strength training equipment. Teenagers must be
supervised at all times while using this
equipment.

2. This equipment is not intended for use by persons
with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the equipment by a
person responsible for their safety.

3. All warnings and instructions should be read and
proper instruction obtained prior to use. Use this
equipment for its intended purpose ONLY.

4. Inspect the machine before use. DO NOT use
machine if it appears damaged or inoperable.

5. Do not exceed weight capacity of this equipment.

6. Check to see that the selector pin is completely
inserted into the weight stack.

7. NEVER use the machine with the weight stack
pinned in an elevated position.

8. NEVER use dumbbells or other means to
incrementally increase the weight resistance. Only
use the means provided directly from the
manufacturer.

9. Injuries to health may result from incorrect or
excessive training. Cease exercise if you feel faint
or dizzy. Obtain a medical exam before beginning
an exercise program.

10. Keep body, clothing, hair, and fitness accessories
free and clear of all moving parts.

11. Adjustable stops, where provided, must be used
at all times.

12. When adjusting any adjustable mechanism (stop
position, seat position, pad location, range of
motion limiter, pulley carriage, or any other type),
make certain that the adjustable mechanism is fully
engaged prior to use to prevent unintended motion.

13. Manufacturer recommends that this equipment be
secured to the floor to stabilize and eliminate
rocking or tipping over. Use a licensed contractor.

14. If equipment is NOT secured to floor: NEVER allow
resistance straps, ropes or other means to be
attached to this equipment, as this may result in
serious injury. NEVER use this equipment for
support during stretching, as this may result in
serious injury.

15. DO NOT REMOVE THIS LABEL. REPLACE IF
DAMAGED OR ILLEGIBLE.

NOT a stand-alone unit.

MUST be connected to

other units in a
Matrix-approved
configuration for

added stability.

WARNING

4

PRODUCT SPECIFICATIONS

G3-MS24
Adjustable
Pulley

G3-MS51
Lat Pulldown

G3-MS52
Triceps
Pressdown

G3-MS53
Low Row

G3-MS20
Adjustable Cable
Crossover

G3-MS40
4-Stack
Multi-station

G3-MS50
5-Stack
Multi-station

G3-MS80
8-Stack
Multi-station

Max User Weight 136 kg / 300 lbs.

Product Weight

90 kg /

198.5 lbs.

118 kg /
261 lbs.

80.5 kg /

177.5 lbs.

126 kg /
278 lbs.

399 kg /
880 lbs.

998 kg /
2200 lbs.

1197 kg /
2640 lbs.

1996 kg /
4400 lbs.

Overall Dimensions
(L x W x H)*

68 x 70 x 240 cm /
27 x 28 x 94.5”

126 x 120 x 252 cm /
50 x 47.5 x 99.5”

85 x 59 x 240 cm /

33.5 x 23.5 x 94.5”

230 x 71 x 240 cm /
91 x 28 x 94.5”

397.4 x 90 x 239.6 cm /

156.5 x 35.4 x 94.3”

167.8 x 369.8 x
252 cm /

66.1 x 145.6 x

99.2”

481.5 x 369.8 x

251.7 cm /

189.6 x 145.6 x

99.1”

561.3 x 145.6 x

251.7 cm /
221 x 57.3 x 99.1”

Weight Stack

91 kg /
200 lbs.

134 kg /
295 lbs.

91 kg /
200 lbs.

134 kg /
295 lbs.

2 x 91 kg /
2 x 200 lbs.

2 x 91 kg,
2 x 134 kg /
2 x 200 lbs.,
2 x 295 lbs.

3 x 91 kg,
2 x 134 kg /
3 x 200 lbs.,
2 x 295 lbs.

4 x 91 kg,
4 x 134 kg /
4 x 200 lbs.,
4 x 295 lbs.

* Ensure a minimum clearance width of 0.6 meters (24”) for access to and passage around MATRIX strength equipment.

Please note, 0.91 meters (36”) is the ADA recommended clearance width for individuals in wheelchairs.

PROPER USAGE

1. Do not exceed weight limits of the exercise device.

2. If applicable, set safety stops to appropriate height.

3. If applicable, adjust seat pads, leg pads, foot pads, range of motion adjustment,
or any other type of adjustment mechanisms to a comfortable start position.
Make certain that the adjusting mechanism is fully engaged to prevent
unintentional movement and to avoid injury.

4. Sit on bench (if applicable) and get into appropriate position for exercise.

5. Exercise using no more weight than you can safely lift and control.

6. In a controlled manner, perform exercise.

7. Return weight to its fully-supported start position.

WARRANTY

For North America, please visit www.matrixtness.com for warranty information
along with warranty exclusions and limitations.

MAINTENANCE CHECKLIST

ACTION FREQUENCY

Clean Upholstery * Daily

Inspect Cables Daily

Clean Guide Rods Monthly

Inspect Hardware Monthly

Inspect Frame Bi-Annually

Clean Machine As Needed

Clean Grips * As Needed

Lubricate Guide Rods † As Needed

* Upholstery & Grips should be cleaned with a mild soap and water or a non-

ammonia based cleaner.

† Guide rods should be lubricated with Teon based lubricant. Apply the

lubricant to a cotton cloth and then apply up and down the guide rods.

5

TOOLS REQUIRED FOR ASSEMBLY (not included)

3MM L-Shaped Allen Wrench 10MM L-Shaped Allen Wrench

4MM L-Shaped Allen Wrench Phillips Screwdriver

5MM L-Shaped Allen Wrench 8MM Open-End Wrench

6MM L-Shaped Allen Wrench 17MM Open-End Wrench

8MM L-Shaped Allen Wrench Guide Rod Lubrication

If any items are missing please contact your country’s local MATRIX dealer for assistance.

0 mm 10 20 30 40 50 60 70 80 90 100 110 120 130

UNPACKING

Thank you for purchasing a MATRIX Fitness product. It is inspected before it is
packaged. It is shipped in multiple pieces to facilitate the compact packaging of the

machine. Prior to assembly, conrm all the components by matching them with

the exploded diagrams. Carefully unpack the unit from this box and dispose of the
packing materials in accordance with your local laws.

CAUTION

To avoid injury to yourself and prevent damage to the frame components, be sure
to have proper assistance removing the frame pieces from this box. Please be sure
to install the equipment on a stable base, and properly level the machine. Ensure
a minimum clearance width of 0.6 meters (24”) for access to and passage around
MATRIX strength equipment. Please note, 0.91 meters (36”) is the ADA recommended
clearance width for individuals in wheelchairs.

6

G3-MS24

TECH SPECS

Maximum Training Weight 91 kg / 200 lbs.

Product Weight 90 kg / 199 lbs.

Overall Dimensions (L x W x H)* 68 x 70 x 240 cm / 27” x 28” x 94.5”

* Ensure a minimum clearance width of 914 mm / 36” for access to and passage around MATRIX strength equipment.

TRAINING AREA

3.2

M (

10.5

FT

)

FREE AREA

0.6

M (2 FT)

WIDE PATH

68˚ 68˚

MS24 DIMENSIONS

0.68

M × 0.70 M

(

27

IN × 28 IN

)

Adjustable
Pulley

Adjustable
Pulley

11

22

11

22

Tri ce ps

Biceps

7

Z01
Z02
Z04
Z05
Z06
Z11
Z12
Z13
B25
V03
F01
F02
F03
F04
F05
Z20
Z21
K19

Screw, Oval-Hex Socket (M10x100L)
Arc-flat Washer
Nylon Nut (M10)
Screw, Oval-Hex Socket (M12x25L)
Flat Washer (M12)
Screw, Oval-Hex Socket (M6x45L)
Nylon Nut (M6)
Rubber Stack Cushions
Screw, Oval-Hex Socket (M8x30L)
Sticker, Weight Stack Plate
Pulley (115mm)
Pulley (90 mm)
Bolt, hex-head
Nylon Nut (M10)
Cable
Rubber Tip Weight Shield Bolt
Rubber Shield
Screw, Oval-Hex Socket (M6x15L)

4
8
4
2
2
2
2
2
2
1
3
4
7
7
1
8
8

10

Item Description Qty

NOTE:
Before attaching weight plate decals,
be sure to verify the head plate is
positioned on the weight stack so that
the bolt attaching the pull pin to the
head plate is positioned behind the
chrome adjustment tube.

B25

F05

Z05

Z06

F03x2

F02x2

F04x2

Z05

Z06

Z20x8

Z21x8

F04

F01

F03

F04

F02

F03

K19x2
Z12x2
Z11x2

K19x8

F04

F01

F03

V03

F04

F02

F03

Z13x2

Z04x4

Z02x8

Z01x4

F04

F01

F03

G3-MS24

8

G3-MS51

Lat
Pulldown

Lat
Pulldown

11

22

MS51
TRAINING
AREA

FREE AREA

0.6 M (2 FT)
WIDE PATH

1.2 M

(

47.5”

)

1.26

M

(

50”

)

TECH SPECS

Maximum Training Weight 134 kg / 295 lbs.

Product Weight 118 kg / 261 lbs.

Overall Dimensions (L x W x H)* 126 x 120 x 252 cm / 50” x 47.5” x 99.5”

* Ensure a minimum clearance width of 914 mm / 36” for access to and passage around MATRIX strength equipment.

9

Z01
Z04
Z05
Z07
Z08
Z17
Z18
Z10
Z11
Z12
Z13
Z14
Z15
Z16
V03
F06
F08
F22
F23
K19

Screw, Round-Hex Socket (M8x30L)
Screw, Round-Hex Socket (M10x100L)
Flat Washer (M10)
Nylon Nut (M10)
Screw, Round-Hex Socket (M10x80L)
Screw, Round-Hex Socket (M10x25L)
Arc-flat Washer
Screw, Round-Hex Socket (M12x25L)
Flat Washer (M12)
Lock Washer (M12)
Screw, Round-Hex Socket (M6x45L)
Nylon Nut (M6)
Screw, Oval-Hex Socket (M10x35L)
Rubber Stack Cushions
Sticker, Weight Stack Plate
Pulley
Cable
Bolt, hex-head
Nylon Nut (M10)
Screw, Round-Hex Socket (M6x15L)

2

16

4

18

2
2

34

2
2
2
2
2
3
2
1
7
1
7
7

10

Item Description Qty

F23

F06

F22

F23

F06

F22

F23

F06

F22

F23

F06

F22

Z16

Z14

K19

Z13

Z10

Z12

Z11

Z15

Z07

Z05

Z08

Z18

Z17

Z18

Z04

Z01

Z07Z18

Z18
Z04

V03

F08

G3-MS51

10

G3-MS52

TECH SPECS

Maximum Training Weight 91 kg / 200 lbs.

Product Weight 80.5 kg / 178 lbs.

Overall Dimensions (L x W x H)* 85 x 59 x 240 cm / 33.5” x 23.5” x 94.5”

* Ensure a minimum clearance width of 914 mm / 36” for access to and passage around MATRIX strength equipment.

Tric e ps
Pressdown

Tric e ps
Pressdown

11

22

FREE AREA

0.6

M (2 FT)

WIDE PATH

MS52
TRAINING
AREA

0.59

M

(

23.5”

)

0.85

M

(

33.5”

)

11

Z01
Z02
Z05
Z06
Z07
Z09
Z10
Z11
V02
F06
F08
F22
F23
K19

Screw, Oval-Hex Socket (M8x30L)
Screw, Oval-Hex Socket (M10x35L)
Screw, Oval-Hex Socket (M6x45L)
Nylon Nut (M10)
Arc-flat Washer
Screw, Oval-Hex Socket (M10x90L)
Nylon Nut (M10)
Rubber Stack Cushions
Sticker, Weight Stack Plate
Pulley
Cable
Bolt, hex-head
Nylon Nut (M10)
Screw, Oval-Hex Socket (M6x15L)

2
4
2
2

16

8
8
2
1
2
1
2
2

10

Item Description Qty

Guide Sleeve

Z02

F23

F06

F22

Z05

Z06

K19

V02

Z11

F08

Z09 Z07 Z07

Z10

F23

F06

F22

Z01

G3-MS52

12

G3-MS53

TECH SPECS

Maximum Training Weight 134 kg / 295 lbs.

Product Weight 126 kg / 278 lbs.

Overall Dimensions (L x W x H)* 230 x 71 x 240 cm / 91” x 28” x 94.5”

* Ensure a minimum clearance width of 914 mm / 36” for access to and passage around MATRIX strength equipment.

Low RowLow Row

11

22

MS53
TRAINING
AREA

FREE AREA

0.6

M (2 FT)

WIDE PATH

0.71 M
(

28”

)

2.92

M

(

115”

)

13

Z01
Z02
Z05
Z06
Z07
Z08
Z09
Z10
Z11
Z13
Z14
Z16
V03
F05
F07
F22
F23
K18
K19

Screw, Oval-Hex Socket (M8x30L)
Screw, Oval-Hex Socket (M10x35L)
Screw, Oval-Hex Socket (M6x25L)
Nylon Nut (M6)
Screw, Oval-Hex Socket (M8x70L)
Nylon Nut (M8)
Nylon Nut (M10)
Screw, Oval-Hex Socket (M10x25L)
Flat Washer (M10)
Screw, Oval-Hex Socket (M10x80L)
Rubber Stack Cushions
Arc-flat Washer
Sticker, Weight Stack Plate
Pulley
Cable
Bolt, hex-headv
Nylon Nut (M10)
Flat Washer (M8)
Screw, Oval-Hex Socket (M6x15L)

2
4
2
2
2
2
2
2
4
2
2
2
1
9
1
9
9
4

10

Item Description Qty

K18

F23

F05

F22

Z08

Z07

Z02

F23

F05

F22

Z09

Z11

Z13

Z01

Z10

Z16

V03

F23

F05

F22

Z14

F23

F05

F22

F23

F05

F22

Z05

Z06

K19

F07

Hooker

Handlebar Holder

G3-MS53

14

Z02
Z16 Screw, Round-HS(M8x30L)

Flat Washer (M8) 12

12

Item Description Qty

Frame Detail

Z16
Z02

Adjustable Pulley
G3-MS24

Low Row
G3-MS53

Tricep

G3-MS52

Lat Pull

G3-MS51

Z16
Z02

G3-MS40

4 Stack

Sample Conguration

15

Z02
Z16 Screw, Round-HS(M8x30L)

Flat Washer (M8) 12

12

Item Description Qty

Frame Detail

Z16
Z02

Adjustable Pulley
G3-MS24

Low Row
G3-MS53

Tricep

G3-MS52

Lat Pull

G3-MS51

Z16
Z02

G3-MS50

5 Stack - Step 1 of 3

Sample Conguration

16

Adjustabel Pulley Right
G3-MS24

Z12

Z10

Z22

Z15

Z14

Z12

Z10

Z22

Z02 Z16Z09 Z22

Z02
Z09
Z10
Z12
Z14
Z15
Z16
Z22

Flat Washer (M8)
Screw, Oval-HS(M10x100L)
Nylon Nut (M10)
Flat Washer (M10)
Screw, Round-HS(M10x80L)
Screw, Round-HS(M10x25L)
Screw, Oval-HS(M8x25L)
Arc Washer

4
4
8
8
4
4
4
12

Item Description Qty

Frame Detail

G3-MS50

5 Stack - Step 2 of 3

Sample Conguration

17

Z20
Z21 Rubber Shield

Rubber Tip Weight Shield Bolt 24

24

Item Description Qty

Accessory Detail

Z20Z21

Z20

Z21

Z20

Z21

Inner shrouds
present outside of
North America
only.

G3-MS50

5 Stack - Step 3 of 3

Sample Conguration

18

Z02
Z16 Screw, Round-HS(M8x30L)

Flat Washer (M8) 12

12

Item Description Qty

Frame Detail

Z16
Z02

Adjustable Pulley
G3-MS24

Low Row
G3-MS53

Tricep

G3-MS52

Lat Pull

G3-MS51

Z16
Z02

G3-MS80

8 Stack - Step 1 of 3

Sample Conguration

19

Z10
Z12 Flat Washer (M10)

Nylon Nut (M10) 4

8
Z14
Z15 Screw, Round-HS (M10x25L)

Screw, Round-HS (M10x80L) 4

4

Item Description Qty

Frame Detail

Z22 Arc-flat Washer 4

Z12

Z10

Z22

Z15

Z14

Z12

G3-MS80

8 Stack - Step 2 of 3

Sample Conguration

20

Z20
Z21 Rubber Shield

Rubber Tip Weight Shield Bolt 16

16

Item Description Qty

Accessory Detail

Inner shrouds
present outside of
North America only.

Z20

Z21

Z20

G3-MS80

8 Stack - Step 3 of 3

Sample Conguration

21

G3-MS24 / G3-MS51 / G3-MS52 / G3-MS53 / G3-MS20 / G3-MS40 / G3-MS50 / G3-MS80

© 2015 Johnson Health Tech

Part # XXXXXXXXXX

Rev 1.3