G1 STRENGTH
3-STACK MULTI-GYM
IMPORTANT SAFETY INFORMATION
It is the sole responsibility of the purchaser of MATRIX Fitness Systems products to instruct all individuals, whether they are the end user or
supervising personnel on proper usage of the equipment.
It is recommended that all users of MATRIX Fitness Systems exercise equipment be informed of the following information prior to its use.
PROPER USAGE
Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative that MATRIX Fitness Systems
equipment be used properly to avoid injury.
Keep hands and feet clear at all times from moving parts to avoid injury.
CHECK FOR DAMAGED PARTS
1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied by your country’s local
MATRIX Fitness Systems dealer.
2. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They contain important information. If unreadable or
missing, contact your MATRIX Fitness Systems dealer for a replacement.
3. SECURING EQUIPMENT: All equipment MUST be secured to the floor to stabilize and eliminate rocking or tipping over. This must be
performed by a licensed contractor.
4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment, as well as keeping users liability to a
minimum. Equipment needs to be inspected at regular intervals. Defective components must be replaced immediatly. Improperly working
equipment must be kept out of use until it is repaired. Ensure that any person(s) making adjustments or performing maintenance or repair
of any kind is qualified to do so. Matrix Fitness will provide service and maintenance training at our corporate facility upon request or in
the field if proper arrangements are made.
5. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so. MATRIX Fitness
Systems dealers will provide service and maintenance training at our corporate facility upon request.
WARNING: SERIOUS INJURY CAN OCCUR ON THIS EQUIPMENT. FOLLOW THESE PRECAUTIONS TO AVOID INJURY!
1. Never allow children on freeweight equipment. Teenagers must be supervised at all times while using
this equipment.
2. All warnings and instructions should be read and proper instruction obtained prior to use.
3. Cease exercise if you feel faint or dizzy. Obtain a medical exam before beginning an exercise program.
4. Keep body, hair, clothing and fitness accessories free and clear of all moving parts.
5. Inspect the machine before use. DO NOT use machine if it appears damaged or inoperable.
6. Check to see that the selector pin is completely inserted into the weight stack.
7. NEVER use the machine with the weight stack pinned in an elevated position.
8. Never use dumbbells or other means to incrementally increase the weight resistance. Only use the means provided directly
from the manufacturer.
9. This equipment should only be used in supervised areas where access and control are regulated by the owner.
TOOLS REQUIRED FOR ASSEMBLY
13mm and 17mm Wrench
19mm Wrench
M3 L-shaped Allen Wrench
M6 L-shaped Allen Wrench
M8 L-shaped-Allen Wrench
M10 L-shaped Allen Wrench
If any items are missing please contact your country’s local Matrix dealer for assistance.
0mm 10 20 30 40 50 60 70 80 90 100 1
10 120 130 140 150 160
G1MG30LS 3-STACK MULTI-GYM
UNPACKING G1MG30 3-Stack Multi-Gym
Thank you for purchasing a MATRIX Fitness product. This machine is an EN957-1 and EN957-2 complaint Class S product. Your MATRIX G1MG30 3-Stack Multi-Gym
is inspected before it is packaged. It is shipped in multiple pieces to facilitate the compact packaging of the machine. Prior to assembly, confirm all the components by
matching them with the exploded diagrams. The weight stack is shipped in separate packaging to reduce the weight of this box. Carefully unpack the unit from this box
and dispose of the packing materials in accordance with your local laws.
CAUTION
The product weight of the G1MG30 3-Stack Multi-Gym is 1305 lbs (592 kg). The weight stack tower is packaged completely assembled for ease of installation; use extra
caution when removing from its pallet during assembly. The weight stack for this machine is 3 x 200 lbs. (3 x 91 kg). To avoid injury to yourself and prevent damage to
the frame components, be sure to have proper assistance removing the frame pieces from this box. Please be sure to install the equipment on a stable base, properly
level the machine and leave at least two feet of clearance to enter and exit the machine. Maximum user weight for this machine is 350 lbs. (159 kg).
PRODUCT SPECIFICATIONS
TECH SPECS
Overall dimensions (L x W x H) 290 x 319 x 218 cm / 114” x 126” x 86”
Product Weight 592 kg / 1305 lbs.
Weight Stacks 3 x 200 lbs.
Frame Detail
Step 1
Item
Description Qty
Z16
Z03
Z03
Z02
Z02
Z03
Z04
Z04
Z03
Z03
Z04
Z03
Z04
Z03
Z02
Z03
Z03
Z01
Z03
Z03
Z04
Z03
Z03
Z02
Z03
Z03
Z03
Z04
Z01
Z03
Z03
Z02
Z03
Z03
Z01
Z04
Z03
Z03
Z04
Z01
Screw (M10 X 80L)
6
Z02
Screw (M10 X 70L)
9
31
Flat Washer (M10)
Z03
Z04
Nylon Nut (M10)
15
Z16
Screw (M10 X 100L)
1
Z04
Z04
Step 2
Z02
Z03
Z03
Z03
Z04
Z04
Z11
Z11
Z03
Z03
Z03
Z03
Z04
Z04
Z01
Z02
Z03
Z03
Z03
Z03
Z04
Z04
Z04
Z04
Z03
Z03
Z02
Z03
Z02
Z02
Z03
Z03
Z03
Z04
Z02
Z03
Z03
Z03
Z04
Z04
Z04
Z04
Z04
Z03
Z03
Z03
Z04
Z03
Z11
Z11
Z11
Z07
Z03
Z03
Item Description Qty
Z01
Screw (M10 X 80L)
Z02
Screw (M10 X 70L)
Flat Washer (M10)
Z03
Z04
Nylon Nut (M10)
1
9
18
Z07
Screw (M10 X 105L)
1
36
Z11
Screw (M10 X 95L)
7
Z03
Step 3
Item
Description
Qty
Z26
K03
K08
K08
K08
K08
K03
K04
K04
Z27
Z27
Z28
Z25
Z27
Z27
Z28
K09
K09
K09
K09
K07
K07
K07
K11
K11
K11
K11
K11
K11
Z25
Z25
Z27
Z27
Z27
Z27
Z28
Z28
Z26
Z26
Z27
Z27
Z27
Z28
K12
K12
K12
Z25
Z27
Z27
Z27
Z27
Z28
Z28
K03
Guide Rod( 19x1800L)
K04
Guide Rod
K07
Selector Pin
K08
Rubber Guide Rod Bushing
K09
Stop Ring
K11
Rubber Stack Cushions
K12
Lower Rubber Stack
Z25
Screw (M8 X 45L)
Z26
Screw (M8 X 65L)
Z27
Flat Washer (M8)
Z28
Nylon Nut (M8)
4
2
3
6
6
6
4
6
6
24
12
Z26
Step 4
Wave Washer ( 20.7x 29.1x0.3t)
Flange Bushing ( 25.3 X 9.2L)
Qty
1
1
1
1
1
2
2
2
36
15
2
1
2
4
2
8
Item
Description
F23
F24
Z01
Z02
Z03
Z04
Z15
Z16
Z13
Z08
Z17
Z22
Z72 Screw (M12 X 25L)
Z70
Lock Washer (M12)
Z71
Flat Washer (M12)
Z69
Screw (M10 X 80L)
Screw (M10 X 70L)
Flat Washer (M10)
Nylon Nut (M10)
Screw (M10 X 65L)
Screw (M10 X 160L)
Screw (M10 X 30L)
Screw (M10 X 100L)
Shaft ( 20x87L)
Screw (M10 X 75L)
Shaft ( 20 X 130L)
Z15
Z03
Z03
Z04
Z13
Z13
Z03
Z03
Z03
Z03
Z13
Z13
Z17
Z17
Z16
Z16
Z03
Z03
Z03
Z03
Z04
Z04
Z22
Z22
Z03
Z03
Z03
Z03
Z04
Z01
Z03
Z03
Z04
Z02
Z02
Z03
Z03
Z03
Z03
Z04
Z04
Z22
Z03
Z03
Z04
Z22
Z03
Z03
Z04
Z08
Z03
Z72
Z70
Z71
F23
Z69
Z69
F24
Step 5
Flange Bushing (M15x20.5L)
Nylon Nut (M10)
Item
Description
Qty
Z23
Z23
Z03
Z03
Z68
Z68
Z68
Z68
Z03
Z03
Z04
Z04
Z21
Z21
Z03
Z03
Z03
Z03
Z04
Z04
H44 2
Z03
Z04
14
7
2Z09
Z10 1
Z21 2
Z23 4
Z68 8
Z71
Flat Washer (M12)
4
Nylon Nut (M12)
Flat Washer (M10)
Screw (M12 X 152L)
Screw (M10 X 140L)
Screw (M10 X 115L)
Screw (M10 X1 75L)
Z09
Z09
Z71
Z71
Z10
Z03
Z03
Z04
H44
Z71
H44
Z71
Step 6
Flange Bushing ( 16x11L)
Flange Bushing ( 15x21.5L)
Flange Bushing ( 15x19.5L)
Item
Description
Qty
F03
F05
F10
F11
Z04
Z03
Z03
Z14
F17
Z14
Z03
Z03
Z04
F17
Z14
Z03
Z03
Z04
F21
Z11
Z03
Z05
Z05
Z03
Z04
F17
Z14
Z03
Z03
Z04
F21
Z14
Z03
Z03
Z04
F17
Z14
Z03
Z03
Z04
F17
F17
Z02
Z03
Z03
Z05
Z05
Z04
F21
F19
E10
Z14
Z03
Z03
Z04
F17
Z02
Z03
Z03
Z05
Z05
Z04
F21
Z14
Z03
Z03
Z04
F17
F19
F20
Z14
Z03
Z03
Z04
F17
Z14
Z03
Z03
Z04
F17
Z14
Z03
Z03
Z04
F17
Z02
Z03
Z05
Z05
Z04
Z03
F21
Z02
Z03
Z03
Z05
Z05
Z04
F21
Z03
Z04
Z19
Z14
Z03
Z03
Z04
F21
F03
F05
F10
F11
Cable( 4.8x4130L)
1
1
Cable( 4.8x5205L)
1
Cable( 44.8x4300L)
1
Cable( 44.8x3475L)
F17
Pulley ( 90)
F19 Karabiner 2
1E10
11
Z22
Z03
Z18
Long Lat Bar
Z03 Flat Washer (M10)
Z04
Z11
Screw (M10 X 95L)
1
Z02 Screw (M10x70L) 4
10
Z14 Screw (M10 X45L) 13
1Z19
Z18 1
Screw (M10 X 75L)
Z22 1
F21
1F20
7
Z24 1
Z05
Nylon Nut (M10)
Pulley ( 115)
Short Bar
38
Screw ( 10xM8 X24L)
19
Z28
Nylon Nut (M8)
1
Z28
Z24
Step 7
Flange Bushing ( 25.3x33L)
Item
Description
Qty
1D09
1D12
Shaft ( 20 X 192L)
Shaft( 20x79.5L)
1
C Clip External 2
H07
H16
H14 Right End Cover 2
H15 Left End Cover 2
Z72
Z71
Z70
Z74
Z73 2
Z75
Lock Washer (M12)
Flat Washer (M12) 1
1
Screw (M12 X 25L) 1
2
2
Stopper Screw (M8)
Lock Washer (M8)
Lock Washer (M10)
Flat Washer (M10)
Z12 Screw (M10 X 25L)
Z13 Screw (M10 X30L) 2
Z27 Flat Washer (M8) 6
2Z57
Z55
Z56 4
4
Z58
Z59 2
20
Screw (M8 X 15L) 4
End Cap
Set Screw (M6)
Small Disc (hole size)
Large Disc (hole size)
Z03 22
H20 Teflon Washer 2
2H18 End Cover
D09
D12
Z70
Z71
Z72
Z12
Z12
Z03
Z03
Z12
Z12
Z03
Z73
Z74
Z27
Z73
Z74
Z27
Z58
Z58
Z27
Z27
Z55
Z55
Z12
Z03
Z56
Z56
Z56
Z56
Z55
Z55
Z27
Z27
Z58
Z58
Z59
Z59
Z57
Z57
Z12
Z12
Z03
Z03
Z12
Z12
Z03
Z03
Z03
Z03
Z13
Z13
Z75
Z75
H07
H15
H15
H14
H14
H16
H16
H20
H20
H18
H18
Step 8
Description QtyItem
Q01
Q02
Q03
Q01 Front Shield 1
Front Shield 1Q02
Front Shield 1Q03
Z20 Screw (M8 X 20L) 18
Z20
Z20
Z20
Z20
Z20
Z20
Z20
Z20
Z20
Z20
Z20
Z20
Z20
Z20
Z20
Z20
Z20
Z20
MULTI-POSITION PRESS
1. Adjust the pressing arm into the lower positions for the Bench Press exercise.
2. Adjust the pressing arm in the upper positions for the Shoulder Press exercise.
3. Back pad adjusts to correspond with the angle of the pressing arm.
4. Seat pad adjusts to provide secure and comfortable positioning.
LEG EXTENSION CURL
1. Pull-knob located behind the back pad adjusts the machine between exercises.
2. Use the lower leg pads for the Leg Extension.
3. Use the upper leg pads for the Leg Curl.
4. Adjust the length of the leg pads to sit comfortably above the ankle.
LAT PULLDOWN - LOW ROW
1. Thigh pads are used to secure positioning during Lat Pulldown.
2. For Low Row exercise, raise thigh pads to highest position and pivot seat out.
3. Attach Low Row handle to clip, located under thigh pads.
4. Rest Lat Pulldown bar on upper hooks when performing Low Row.
MATR IX F I TNE SS | 160 0 L AND MA RK DR I VE CO T TA GE GR OV E WI 53 52 7 US A
To l l Fre e
86 6. 69 3.4 863
ma t r ix f it n es s .c o m F a x
60 8. 839.86 87
PART # 0 0 0 0 000 000
REV. 1.4B
Loading...