MAT CL400 User Manual

Wireless Remote Lighting Controller

Luxmatic CL400

Manage outdoor lighting remotely.

Wireless remote lighting controller, CL400 is an intelligent device

that monitors the status of outdoor lighting such as energy measurement

and tracking abnormality of lamps, and controls on/off/dimming

by using two-way wireless communication.

Check and manage the lights with smartphone and tablet

anywhere, anytime.

Capabilities

Remote monitoring (Fault monitoring, Remote control, Scheduling)

Dimming Control (0-10V, 0~100%)

Power consumption measurement (Energy use trend, Total usage, Energy saving)

Event history (Control event history, Usage information)

GPS-based schedule control

Built-in illuminance sensor

Digital Input for movement detection sensor Input

Features

Smartphone app for easy setup and management

Supports smartphone apps that provide all the information related to the outdoors lighting during installation or maintenance.

Network Security

Applied * AES 128/256 algorithm to ensure high security for public facilities lighting that is directly connected with public safety.

*AES(Advanced Encryption Standard) - US government standard encryption algorithm. Ensure high security stability.

Lamp management (Life prediction, Status monitoring, Fault notification)

Predicts lamp life and notifies the abnormality of the lamp to the administrator.

Firmware Upgrade

Support OTAP (Over-The-Air-Programming) function that can easily add functions and upgrade Firmware for complement.

Data and settings preserved in case of power failure

The main data and settings are stored in non-volatile memory (EEPROM).

It prevents operation problem since the final data and setting values are reflected during the recovery after the power failure occurs.

Specifications

Operating Voltage

Power Cosumption

Power Switching

Relay Current

Relay Protection

Surge Protection

Operating Temperature

Wireless Communication

Power Metering

Measuring Item

100~277VAC, 50/60Hz

<2W@120/277V (1.42W @120V/60Hz)

400W

5A

Zero Crossing Control

6KV / 10KA

-40℃ ~ +70℃

IEEE 802.15.4, 2.4000~2.4835GHz

40 Channel

Max. Average power : 19 dBm

Mesh Network with Multi Sink

Node to Node range : 200 m (LoS)

OTAP(Over The Air Programming) program update

Beacon Support

Configuration using Smart Phone Application

Calibrated 1% accuracy

Real-time/Accumulated Power Consumption

Voltage, Current, Power Factor

Dimming Control Signal

RTC

GPS

Photocell

Sensor

Secure

Connector

Size

Color

Safety compliance

Certifications

Warranty

0~10V (ESTA E1.3)

Internal RTC with super CAP

(option)

Ublox M8 base GPS with Internal Antenna

Horizontal Position Accuracy 2.5m

Photocell daytime override (Built-in, Option)

External Motion Sensor I/F (DC12V,100mA)

AES 128/256, SHA-1,SHA-2 encryption

NEMA 7 pin (ANSI C136.41-2013)

85 mm (ø) x 100 mm (H)

Gray / Translucent

IP66

FCC, IC

KC, UL, CE

DLC

5 year limited warranty

Wiring Diagram Appearance

Line

Sensor

Load

(Option)

Sensor
(Option)

Dimming +

Neutral

Dimming -

MAT Co., Ltd.

Phone. [phone] FAX. [phone] E-MAIL. [e-mail] www.luxmatic.co.kr

(14057) 16, Beolmal-ro 118 Beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do Korea