Master Water Conditioning Satin, MP-MCA-45T, MP-MCA-30T, RS-MCA-30T, MP-MCA-60T Application Manual

Satin Series

APPLICATION GUIDE

Highly efficient water conditioning

Master Water’s Satin Series softens water while protecting
appliances and fixtures from hard water mineral deposits.
Needing less water to drain, these efficient water softeners
reduce scale while improving flow in pipes, require low salt
usage and are capable of high capacity with a small footprint.

Water Issue: Hardness, Iron/Manganese, Lead, Copper, Radium

LESS WATER TO DRAIN

Model Number Gallons to Drain

MP-MCA-30T 41.64 Gallons
MP-MCA-45T 45.6 Gallons
MP-MCA-60T 59.56 Gallons

HIGHER SERVICE FLOW

Model Number Rated Flow Rate

MP-MCA-30T 16.8 GPM
MP-MCA-45T 15.5 GPM
MP-MCA-60T 17.3 GPM

HIGHER EFFICIENCY

Model Number Capacity @ 4322 grains

MP-MCA-30T 19,400 gr @ 4.5 lbs
MP-MCA-45T 29,200 gr @ 6.75 lbs
MP-MCA-60T 38,900 gr @ 9 lbs

Water Softeners are certified for hardness removal only.

1

1

MP DUPLEX

Our systems are available in the
following configurations:

• MP (Single Tank) Standard high efficiency model

• RS (Twin Alternating) 24/7 treated water, treated
water regeneration, no wasted capacity

• MP2 (Parallel Units) 24/7 treated water, treated
water regeneration, twice the flow

Options available on all configurations:

• Brine Recovery

• Separate Source Regeneration

• Feed Pump Operation

Product tested and certified by WQA to

meet the requirement of NSF/ANSI 44

Product Versions Mineral Tank Size Brine Tank Size Backwash Flow Service Flow

MP-MCA-30T 10” x 40” 18” x 33” 1.7 16.8

MP-MCA-45T 10” x 54” 18” x 40” 1.7 15.5

MP-MCA-60T 12” x 48” 18” x 40” 2.7 17.3

RS-MCA-30T 10” x 40” 18” x 33” 1.7 16.8

RS-MCA-45T 10” x 54” 18” x 40” 1.7 15.5

RS-MCA-60T 12” x 48” 18” x 40” 2.7 17.3

MP2-MCA-30T 10” x 40” 18” x 33” 1.7 33.6

MP2-MCA-45T 10” x 54” 18” x 40” 1.7 31.0

MP2-MCA-60T 12” x 48” 18” x 40” 2.7 34.6

www.masterwater.comMade in USA

Satin Series

DEPTH

APPLICATION GUIDE

Brine

1. Will the Satin Series Water Softener fit within the allocated
space in my home?

Check table for space required

2. Will the Satin Series Water softener meet my flow demand?

SATIN SERIES
SYSTEMS

Efficiency Salt <1 ppm Iron (Fe) <1 ppm Iron (Fe) <1 ppm Iron (Fe)
Setting Limits <0.25 ppm Manganese (Mn) <0.25 ppm Manganese (Mn) <0.25 ppm Manganese (Mn)
for ≤ 5 People <13 gpg Hardness <22 gpg Hardness <31 gpg Hardness
salt setting @ 4.5 lbs salt setting @ 6.75 lbs salt setting @ 9 lbs

High Salt <5 ppm Iron (Fe) <5 ppm Iron (Fe) <5 ppm Iron (Fe)
Setting Limits <1 ppm Manganese (Mn) <1 ppm Manganese (Mn) <1 ppm Manganese (Mn)
for ≤ 5 People <13 gpg Hardness <28 gpg Hardness <43 gpg Hardness
salt setting @ 15 lbs salt setting @ 22.5 lbs salt setting @ 30 lbs

Service Flow 16.8 gpm MP/RS-MCA-30T 15.5 gpm MP/RS-MCA-45T 17.3 gpm MP/RS-MCA-60T
Capability 33.6 gpm MP2-MCA-30T 31 gpm MP2-MCA-45T 34.6 gpm MP2-MCA-60T

MP/RS/MP2-MCA-30T MP/RS/MP2-MCA-45T MP/RS/MP2-MCA-60T

WIDTH

Tank

HEIGHT

Capacity 19,400 gr @ 4.5 lbs salt 29,200 gr @ 6.75 lbs salt 38,900 gr @ 9 lbs salt
33,700 gr @ 15 lbs salt 50,500 gr @ 22.5 lbs salt 67,400 gr @ 30 lbs salt

MP-MCA-30T MP-MCA-45T MP-MCA-60T
31”W x 19”D x 48”H 31”W x 19”D x 62”H 33”W x 19”D x 56”H

Total RS-MCA-30T RS-MCA-45T RS-MCA-60T

Dimensions 44”W x 19”D x 48”H 44”W x 19”D x 62”H 48”W x 19”D x 56”H

MP2-MCA-30T MP2-MCA-45T MP2-MCA-60T

65”W x 19”D x 48”H 65”W x 19”D x 62”H 69”W x 19”D x 56”H

If above parameters cannot be used to determine a system, contact Master Water Conditioning.

Systems:

MP – Provides treated water except during regeneration.
RS – Provides continuous treated water and treated water cleaning. One unit is “On Line” while the second

unit is in “Standby”.

MP2 – Provides double the flowrate of a single tank system, continuous treated water and treated water cleaning.
Both units are always “On Line” except during a regeneration.

Options:

Brine Recovery – Saves salt which would normally go to drain.
Separate Source – System can regenerate with water from a separate source.
Feed Pump – Compatible metered feed pump operation without an external meter.

• Local conditions can influence system performance

• Water must be clear when drawn

• Water Softeners are certified for hardness removal only

www.masterwater.comMade in USA