Page 1
Mounting Instructions
for Model: 408
Check package contents against the Supplied Parts List on the next page to
be sure that all components were received and are undamaged.
Carefully read all instructions before attempting installation.
IMPORTANT SAFETY INFORMATION
Install and operate this device with care. Please read these instructions before
beginning the installation, and carefully follow all instructions contained.
Please call a qualified installation contractor for help if you: 1) Don't understand
these directions or have any doubts about the safety of the installation, 2) Are
uncertain about the nature of your wall.
Do not use this product for any other purpose or in any other configuration not
specified in these instructions. We hereby disclaim any and all liability for injury
or damage arising from incorrect assembly, incorrect mounting, or incorrect use
of this product.
1
Page 2
Su ppl ied Par ts L ist
(1)Wa ll Plate-a (1)Screw Cover-d(1)Mount Arm-b
(4)M4x12 Bolt-e (4)M4x30 Bolt-f
(8)M4 Washer-i
(2)Safe ty K nob-n
(6)M6 Washer-j
(2)Cable Ri ng-o 2 x Allen Bolt (p) 1 x Allen Key (r)2 x Spring Washer (q )
(4)M4/M 6 Sp ace-k
(1)Monitor Bracket-c
(4)M6x12 Bolt-g (4)M6x35 Bolt-h
(4)Lag Bolt -l (4)Concre te Anchor-m
CAUTION!
!
WARNING
Tools Required
This TV mount must be securely attached to the
wall. If the mount is not properly installed, it may
fall, resulting in possible injury and/or damage.
3.8mm Drill Bit
Phillips Screwdriver
8mm Masonry Bit
Carpenter's Level
Note: The mo un ti ng com po ne nt s and hardware s up pl ie d in this p ac ka ge are
not design ed for walls with steel studs or cinder block. If the hardware you ne ed
for yo ur installation is not included, please c on ta ct your local hardware store fo r
proper mounting hardware for your specific application.
2
Page 3
St ep 1
Attaching the Wall Plate to the Wall
Cement Wall
50mm
40mm
Wood Wall
50mm
8mm
l
Make su re the All en Bolt
stop sc rew is on t he
botto m side wh en do
this st ep.
Make su re the All en Bolt s top
screw i s on the bo ttom
side wh en do thi s step.
a
l
m
a
St ep 2
3.8mm
Slide the Mount Arm down into Wall Plate
d
b
1. Before doing this step, make sure the Wa ll Plate(a) has
been attached to the wall securely.
2. Put the Screw Cover(d) on the Mount Arm(b).
a
3. Insert the Mount Arm as showed in the left picture.
3
Page 4
St ep 3
Mounting the Monitor Bracket to back of TV
k
e,g
i,j
f,h
i
i,j
St ep 4
Thi s way up!
For Flat Ba ck T V Use spacers ( k) For Curved B ack TV
Attaching TV to Wall Plate and Adding the Safety Knobs
Thi s way up!
n
j
q
Remarks: You can use The Safety Knobs (n) or the Allen Bolts (p) to control the
Til t te ns io n of the M ou nt’s Tilt angle feature. If you use Allen Bolts you must also
use Allen Key (r) to adjust the mount’s tilt angle tightness.
St ep 5
Pinch the Cable Management Rings into the Arm’s openings
o
Thank you for choosing Master Mounts...ENJOY!
4
11052015
Loading...