Master Lock A1305, A5460, A5570 User Manual
CUSTOM LASER ENGRAVING
A1305, A5460, A5570 Series Padlocks
• Custom engraving includes logos and characters (numbers,
letters and symbols)
• Logo engraving requires a high resolution file format.
Email the logo(s) to logos@mlock.com. Logo engraving requires
a signed “Authorization to use Trademark” form (below)
• For orders with different text on each lock, please provide an
®
Excel
spreadsheet with the information. Take note of the
maximum number of characters for the selected line and provide
the text so that each line does not exceed the maximum.
Characters exceeding the maximum per line will not be engraved
• The minimum order quantity for engraving is 48 locks. Logo and
text engraving is charged on a per area per lock basis. Please
contact The Master Lock Company for current pricing per area
• Include this form with your order
This is an Editable PDF file. Your custom information can be typed into the fields using Adobe Acrobat Reader software,
which you can download for free at http://get.adobe.com/reader/. You can also save your data for future use.
AREA SELECTION
Key Marking –
Engrave up to
8 characters
999998
AREA 7
AREA 1
AREA 3
AREA 2
AREA 4
A1105
XXXX
AREA 5
Variable Text Engraving – Check location:
Select an area below for variable text engraving
per provided spreadsheet.
AREA 1 AREA 2 AREA 3 AREA 4
AREA 5 AREA 6
Lock Model – Please indicate which lock model
to engrave (for example, A1305):
_____________________________
Key Code Engraving (on lock) – Check location:
The key code is engraved into the key. If you would
like the key code lasered on the padlock body,
AREA 6
select the area(s) below.
AREA 1 AREA 2 AREA 3 AREA 4
AREA 5 AREA 6
Logo Engraving –
Check location:
AREA 1 AREA 5
Logo File Name:
________________________
Note: Logos will be sized to fit
area. Email graphics file to
logos@mlock.com
Please indicate on page two any areas where you selected variable text, key code(s), and/or logo engraving on the lock body.
AUTHORIZATION TO USE TRADEMARK - Required for Logo Engraving
To: Date: __________________________ Master Lock Company LLC
6744 S. Howell Avenue
Oak Creek, WI 53154
Email: orders@mlock.com
Subject: Authorization of Master Lock Company LLC to produce ____________________________________________________________ branded product.
______________________________________________________ (company) hereby authorizes Master Lock Company LLC to use its trademark(s), including
those listed below, when manufacturing padlocks and accessories.
Trademark(s): _________________________________________________________________________________________________________________________
Please contact me with any questions and for logo approval.
Name: ________________________________________________________________________
Title: __________________________________________________________________________
Company: _____________________________________________________________________
American Lock® is a regi stere d tradem ark of th e Master Lock Com pany LLC. A ll regis tered t rademarks are the prop erty of their respective owners.
www.americanlock.com
www.masterlock.com
Master Lock Company LLC, Milwaukee, WI 53210 U.S.A. | 800-308-9244
Master Lock Canada, Mississauga, ON L5L 5Z9 Canada | 800-308-9244
© 2021 Master Lock Company | All Rights Reserved
A-011 | MO 04/21 PDF Only
Phone: __________________________________________
Email for Logo Approval:
_________________________________________________
A-011
0
CUSTOM LASER ENGRAVING
A1305, A5460, A5570 Series Padlocks
This is an Editable PDF file. Your custom information can be typed into the fields using Adobe Acrobat Reader software,
which you can download for free at http://get.adobe.com/reader/. You can also save your data for future use.
CUSTOM ENGRAVING FORM MUST ACCOMPANY PURCHASE ORDER
End User Company Name: End User Contact Person: End User Address:
___________________________________________________________________________________________________________________
End User ID Number: Distributor Name: Distributor P.O. Number:
___________________________________________________________________________________________________________________
Logo Engraving: For best results, be sure to provide
your desired logo in a high resolution file format.
Logos will be sized to fit area.
Email graphic images to logos@mlock.com
Quantity Ordering: ____________________
(minimum initial order of 48 locks)
CHOOSE ONLY ONE LETTER SIZE - PROVIDE YOUR ENGRAVING INFORMATION
Please choose One Size Option and then complete the appropriate areas below using the amount of character spaces needed for the size you’ve chosen.
Maximum number of rows and characters per row is indicated for each area ( rows X characters )
TOP
FRON T
AREA 1
3 x 21
1/8" SIZE
3/16" SIZE
TOP
FRON T
AREA 1
2 x 14
1/4" SIZE
TOP
FRON T
AREA 1
2 x 10
Swiss is the Standard Font
BOTTOM
FRON T
AREA 2
2 x 21
RIGH T
SIDE
AREA 3
3 x 20
TOP
BACK
AREA 4
2 x 21
BOTTOM
BACK
AREA 5
4 x 21
LEF T
SIDE
AREA 6
3 x 20
BOTTOM
FRON T
AREA 2
2 x 14
RIGH T
SIDE
AREA 3
2 x 14
TOP
BACK
AREA 4
1 x 14
BOTTOM
BACK
AREA 5
3 x 14
LEF T
SIDE
AREA 6
2 x 14
BOTTOM
FRON T
AREA 2
1 x 10
RIGH T
SIDE
AREA 3
2 x 9
TOP
BACK
AREA 4
1 x 10
BOTTOM
BACK
AREA 5
3 x 10
LEF T
SIDE
AREA 6
2 x 9
Loading...