4688
Transportation Security Administration (TSA) baggage screeners
are trained to recognize the Travel Sentry® red diamond logo
on TSA – accepted locks. They have access to a secured set of
codes and tools which allow them to open, inspect and relock
baggage which is locked with a TSA – accepted lock.
COMBINATION RESETTING INSTRUCTIONS
Your new lock is preset at the factory to unlock at 0-0-0. Make
sure you are able to open and close the lock prior to setting your
own combination. Carefully follow each step to ensure proper
setting procedures.
1. Adjust dials so the preset factory combination of 0-0-0 aligns
with the markers.
2. Hold cable tip (A) and move toward left to remove from
the lock.
3. While pushing in button (B) turn the dials to any combination
you choose.
4. Release button (B), insert cable tip (A) back into the hole, push
down and move all the the way to the right.
5. The lock is now ready to be used with your combination.
To change the combination again, repeat steps 2-4.
2. 3. 4.
A
B
Loading...