Masterflex 07588-80, 07588-30, 07588-35, 07588-60, 07588-65 Instruction Manual

INSTRUCTION SHEET

MULTI-HEAD I/P® FIXED SPEED PUMP SYSTEM (115 & 230 VAC)

07588-30, 07588-35, 07588-60, 07588-65
07588-80, 07588-87, 07588-90, 07588-97

GENERAL DESCRIPTION

The pump is a Multi-Head I/P
transfer applications with fixed flow rate capability.

®

fixed speed system with 2 or 4 pump heads attached and is intended for fluid

Assembled by:

Trademarks bearing the ® symbol in this publication are registered in the U.S. and in other countries.

Page 1 of 2

Printed in U.S.A. Edition 06

A-1299-1029

INSTRUCTION SHEET

Assembled by:

MAINTENANCE:

CLEANING

The exterior surfaces of the unit may be cleaned using water and a strong detergent.

Do not immerse the unit.

NOTES:

1. Electromagnetic Compatibility (EMC): Meets conducted and radiated emissions requirements of
EN 61326 to comply with EU EMC Directive for the European Union “CE” mark. Radiated and
conducted emission limits are to those of Class B equipment (residential, commercial and light industry
applications).

UL 508, Industrial Control Equipment requirements.

CSA C22.2 No.14 requirements.

EU Low Voltage Directive safety requirements per EN 61010-1 for the European Union “CE” mark.

2. Machine operation must be in a horizontal position as shown on first sheet.

WARNING: To reduce the risk of electric shock, connect only to a properly grounded,
grounding-type receptacle.

WARNING: Weight 75 lbs. Use care in lifting and handling.

CAUTION: To prevent ignition of hazardous atmospheres, this system should not be installed
in an area where vapor or gases having an ignition temperature less than 280° C are present

WARNING: PRODUCT USE LIMITATION. This product is not designed, nor intended, for use
in patient connected applications; including but not limited to, medical and dental use, and
accordingly has not been submitted for FDA approval. Contact the factory for further details.

Page 2 of 2

A-1299-1029

Printed in U.S.A. Edition 06