Petrol Drive Unit
OPERATING AND MAINTENANCE
INSTRUCTIONS
K1620
TO PREVENT SERIOUS INJURY
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
AG Pulie Pty Ltd
6 Wentworth St
PO Box 309
Granville NSW 2142
www.agpulie.com.au
Model No – K1620
Potential Hazard(s)
Risk Level
Control Measure(s)
Parts
correctly mounted on to
the machine
.
Take note of warning labels on the motor.
safety
to the db output of the motor
Plant Name – Spring Mounted Petrol Drive Unit
Manufacture
–
AG Pulie
Mandatory Personal Protective Equipment
–
Foot Hearing Protective
Protection Protection Clothing
RISK ASSESSMENT INFORMATION
Operator Competency – Plant Licence Not Required
Contact with Moving
Contact with hot parts of
the engine
Low Do not operate unless all covers and guards are
Low/Medium Muffler is fitted with a heat shield. Allow motor
to cool down before performing maintenance.
Explosion or Fire Medium Don’t refuel while the motor is running or hot.
Avoid spilling fuel when refuelling. Follow motor
manufacturers instructions for refuel and petrol
Hearing damage Medium/Low Ensure you are wearing hearing protection rated
Manual Handling List Medium/Low Always use a two man lift when moving the
machine to avoid personal injury.
Poisoning from Fumes Medium/Low Always operate the machine in a well-ventilated
area. Avoid breathing in petrol fumes.
IMPORTANT
Before using Drive Unit,
Read and understand these operators’ instructions
Follow the motor manufacturers instructions for operating the motor
Ensure that the work site is safe and free of hazards
Key Operating Instructions
1- Insert the flexible shaft into the housing. It is securely in place when the shaft locking
pin returns to original position.
2- To start the motor follow the manufacturer’s instructions
3- When the work is complete shut the motor down following the manufacturer’s
instructions.
4- Ensure you clean all equipment after use. Excessive concrete build up can affect the
performance of the machine.
Loading...