Mastercraft Mtsv-17e, Mtsv-20e, Mts-17e, Mts-20e Owner's Manual
SAFETY,
PERATION AND
O
MAINTENANCE
MANUAL
HIGH, DUO &
VARIABLE SPEED
FLOOR MACHINE
This unit is intended for commercial use.
READ & FOLLOW ALL INSTRUCTIONS,
ARNINGS & CAUTIONS BEFORE USING
W
THIS FLOOR MACHINE
This floor machine will afford you many
years of trouble free operating satisfaction
if it is given proper care. All parts have
passed rigid quality control standards
before being assembled to produce the finished product. Prior to packaging, the floor
machine is again inspected for assurance
of flawless assembly.
This floor machine was protectively packed
to prevent damage in shipment. We recommend that upon delivery, remove the
unit from its carton and carefully inspect it
for any possible damage in transit.
If damage is discovered, immediately notify
the transportation company that delivered
your floor machine. As a shipper, we are
unable to act upon any claim for concealed
damage. You must originate any claim
within 5 days of delivery.
These instructions are for your protection
and information. PLEASE READ CAREFUL-
LY! Failure to follow these precautions
could result in injury or discomfort.
Treat this floor machine as you would any
other high grade precision made product.
Throwing, dropping, unreasonable bumping across thresholds and other misuse
may result in a damaged unit and invalidate
the warranty.
PLEASE READ
CAREFULLY
BEFORE
OPERATING
SAVE THESE INSTRUCTIONS
PAGE 1
High, Duo & Variable Speed FM Manual - PN 350982 - Printed in USA 09/06/05
IMPORTANT
SAFETY
INSTRUCTIONS
When using this floor machine, basic precautions should always be followed, including the following:
WARNING:
To reduce the risk of fire, electric shock or injury;
Read all instructions before using this floor machine.
1) DO NOT leave this machine plugged in
when not in use. Unplug from outlet when
not in use and/or before servicing.
2) Electric shock could occur if exposed to
rain. Store indoors.
3) This is NOT a toy. Close attention is necessary when used around or near children.
4) Use only as described in this manual.
Use only manufacturer's recommended
attachments.
5) DO NOT use with damaged cord plug. If
the floor machine is not working as it
should because it has been dropped, damaged, left outdoors, or dropped into water,
contact the manufacturer or authorized
service center.
This floor machine must be grounded. If it
GROUNDING
INSTRUCTIONS
should malfunction or breakdown, grounding
provides a path of least resistance for electrical current to reduce the risk of electric shock.
This machine is equipped with a cord having an
equipment-grounded plug. The plug must be
inserted into an appropriate outlet that is properly installed and grounded in accordance with
all local codes and ordinances
6) DO NOT pull or carry by cord, use
power cord as a handle, close a door on
cord, or pull cord around sharp edges or
corners. DO NOT run floor machine over
the cord. Keep cord away from heated surfaces.
7) DO NOT handle the plug or operate with
wet hands.
8) DO NOT put any object into the motor
openings.
9) DO NOT unplug by pulling on cord. To
unplug, grasp the plug, not the power cord.
10) Keep hair, loose clothing, fingers and
all parts of body away from moving parts.
11) DO NOT operate where oxygen or
anesthetics are used.
12) DO NOT use around flammable or
combustible liquids such as gasoline or use
in areas where they may be present.
13) DO NOT use an extension cord unless
absolutely necessary. If an extension cord is
used, then wire size must be #14 gauge or
thicker and should not exceed 50 feet in
length. Use only a 3 wire grounded extension cord to ensure grounding protection.
14) Replace damaged or worn parts
immediately with genuine original equipment parts to maintain safety and protect
your limited warranty.
If repair or replacement of the cord or plug is
necessary, DO NOT connect the grounding
wire to either flat blade terminal. The wire
with insulation having an outer surface that is
green with or without yellow stripes is the
grounding wire.
GROUNDING
METHODS
DANGER:
Improper use of the
grounding plug can
result in a risk of
electrical shock.
This floor machine is for use on a nominal
120 volt circuit, and has a grounding plug
that looks like the plug illustrated in (Fig A). A
temporary adaptor that looks like the adaptor
illustrated in (Fig B & C) may be used to connect the plug to a 2-pole receptacle as shown
in (Fig A) if a properly grounded outlet is not
available.
WARNING:
Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified
electrician or service person if you are in doubt as to whether the outlet is properly grounded. DO NOT modify the
plug provided with the burnisher. If it will not fit the outlet, have a proper outlet installed by a qualified electrician.
NOTE: In Canada, the use of a temporary adaptor is not permitted by the Canadian Electrical Code.
PAGE 2
The temporary adaptor should be used only
until a properly grounded outlet (Fig A) can be
installed by a qualified electrician. The green
color rigid ear, lug, or like extending from the
adaptor must be connected to a permanent
ground such as a properly grounded outlet box
cover. Whenever the adaptor is used, it must
be held in place by the metal screw (Fig C).
Loading...