model no. 058-6553-2
30” 1-Drawer Tool Cart
3
SAFETY
PARTS LIST
ASSEMBLY INSTRUCTIONS
OPERATING INSTRUCTIONS
MAINTENANCE
WARRANTY
4
6
8
9
9
10
model no. 058-6553-2 I contact us 1-800-689-9928
4
This manual contains information that relates to PROTECTING PERSONAL SAFETY
and PREVENTING EQUIPMENT PROBLEMS. It is very important to read this manual
carefully and understand it thoroughly before using the tool cart.
• The maximum weight for each drawer should be no more than 75 lb (34 kg).
DO NOT OVERLOAD DRAWERS.
• The maximum product weight, including contents, should be no more than
450 lb (204.5 kg) for the cart.
• DO NOT attempt to lift the cart using chains, ropes or other lifting devices if two
persons cannot lift the cart by the side handles. Use a forklift placed under the
bottom of the cart if this situation occurs. The side handles may fail, which may
cause personal injury or damage to the product.
• DO NOT stand on this product. You may fall, which may cause personal injury.
• WEAR SAFETY GLASSES when removing or repositioning the slides.
• When moving this product, do not pull it. Push the product to prevent personal
injury.
• Handle and swivel castors must be attached on the same side of the product.
• USE THE BRAKES when not moving this product. This will prevent the product
from rolling, which may cause personal injury or product damage.
• DO NOT open more than one drawer at a time. The product may become
unstable and tip, which may cause personal injury or product damage.
• DO NOT mount this product on a truck bed or any other moving object. This may
cause personal injury or product damage.
• Secure this product properly before moving it with a forklift.
• DO NOT tow with power equipment. The product could tip, which may cause
personal injury or product damage.
• DO NOT alter this product in any manner. For example, do not weld external lock
bars or attach electrical equipment. This may cause product damage or personal
injury.
• Keep the product on level surfaces. The product may become unstable and tip if
stored or moved on an uneven surface, which may cause personal injury or
product damage.
• When the cover is open, be sure the cover stop is in the locked position. This will
prevent accidental closure and personal injury.
• BE CAREFUL when closing the cover. Remove hands before the cover closes
completely to prevent personal injury.
• Close the cover and lock the drawers before moving this product. The drawers
could come open and make the product unstable and tip, which may cause
personal injury or product damage.
• Remove the liner from the product, if necessary, before installing the product.
Otherwise, the product could slip, be damaged and cause injuries.
• When locking the product, close the drawer for lock bars to work properly.
• IMPORTANT: Do not attach or mount this product to a vehicle. Mounting this
product to any vehicle in any manner will void warranty.
5
model no. 058-6553-2 I contact us 1-800-689-9928
6
TOOL CART 058-6553-2
PARTS LIST
Drawer assembly
M6 hex flange nut (for handle)
Handle
M6x12 bolt (for handle)
Leg frame
M8x35 hex bolt
M8 hex flange nut
Bottom tray
Swivel castor with brakes
Swivel castor without brakes
Drawer pull
Lock assembly (601-610)
M5x12 bolt (for drawer pull)
Drawer liner
Wrench for castors 1
02-601321-01
02-471204
02-601321-05
02-471605
02-601321-02
02-471106
02-471207
02-601321-03
02-200203-1
02-200203-2
02-601321-04
02-460904
02-471603
02-601321-06
02-601321-07
1
4
1
4
2
16
12
1
2
2
1
1
2
1
The keys are taped to the top of the castor carton, which is placed in the
top tray.
7
8
model no. 058-6553-2 I contact us 1-800-689-9928
Position the cart handle (3) over the
holes and attach with the M6 x 12
bolts (4) and the M6 hex flange nuts (2)
Tighten securely.
Carefully lay down the cart. Position the
two swivel castors with brakes (9) close
to the handle side and screw into the legs.
Screw the two swivel castors without
brakes (10) onto the other legs.
Tighten them securely with the wrench (15).
Extend the drawer slides from the
9
tool chest. Insert the brackets on
each side of the drawer into the
slots in the slide and ensure that
they are properly in position. Once
properly inserted, completely close
the drawer to set the slides in their
proper positions.
10
This Mastercraft product is guaranteed for a period of one (1) year from the date of
original retail purchase against defects in materials and workmanship.
This warranty is subject to the following conditions and limitations:
model no. 058-6553-2 I contact us 1-800-689-9928
11
Loading...