MasterCraft 054-3107-2 Instruction Manual

INSTRUCTION MANUAL

Multi-Charger
054-3107-2

Parts missing or damaged? Questions? Toll-free Helpline – 1-800-689-9928

Important: Carefully read this Instruction Manual before using this tool. Pay close attention to

all Safety Instructions, Warnings, and Caution sections. Use this tool properly, and only
for its intended use.

Safety symbols in this Instruction Manual are used to flag possible dangers. The safety symbols

and their explanations require the operator’s full understanding. The safety warnings do not, by
themselves, eliminate any danger, and they are not a substitute for proper accident prevention
measures.

This Safety Alert Symbol indicates caution, warning, or danger. Failure to obey a safety

warning can result in serious injury to yourself or others. To reduce the risk of injury, fire,
or electric shock, always follow the safety precautions.

Page 2 054-3107-2 Multi-Charger_R12-08

TABLE OF CONTENTS

Specifications ........................................................ Page 2

Rules for Safe Operation ................................................ Page 2

Description .......................................................... Page 4

Operation ........................................................... Page 5

Troubleshooting ....................................................... Page 7

Maintenance ......................................................... Page 7

Exploded View & Parts List .............................................. Page 8

Warranty ............................................................ Page 9

SPECIFICATIONS

Charger Input 120 V ~ 60 Hz AC only

Compatible batteries 054-2962-0

054-1254-2
054-3105-6
054-3104-8
054-3106-4

Charger Weight 1 lb 11 oz (0.77 kg)

Optimum Charging Temperature Ni-Cd: 50° to 86°F (10° to 30°C)

Li-ion: 32° to 104°F (0° to 40°C)

SAFETY RULES

Before operating this charger, carefully read this Operating Manual and all of the labels
affixed to the tool. Keep this manual in a safe place for future reference.

IMPORTANT

This charger should be serviced only by a qualified service technician.

READ ALL INSTRUCTIONS CAREFULLY

SAVE THESE INSTRUCTIONS

GENERAL SAFETY RULES

WORK AREA SAFETY

• Keep the work area clean and well lit. Cluttered benches and dark areas invite accidents.

• Do not operate power tools in an explosive environment, such as in the presence of
flammable liquids, gases, or dust. Power tools create sparks, which may ignite the dust

or fumes.

• Keep bystanders, children, and visitors away when operating power tools. Distractions
can cause the operator to lose control.

ELECTRICAL SAFETY

• The plug on the power cord must match the outlet.

054-3107-2 Multi-Charger_R12-08 Page 3

• Do not alter the plug in any way. Do not use an adaptor plug with a grounded power
tool. Using unaltered plugs and proper outlets reduces the risk of electric shock.

• Avoid bodily contact with grounded surfaces, such as pipes, radiators, ranges, and
refrigerators. There is an increased risk of electric shock if the operator’s body is grounded.

• Do not expose power tools to rain or wet conditions. Water entering a power tool will

increase the risk of electric shock.

• Do not abuse the power cord. Never use the cord to carry the tool or to pull the plug
out of an outlet. Keep the cord away from heat, oil, sharp edges, and moving parts.
Damaged or entangled cords increase the risk of electric shock.

• Use an outdoor extension cord that is suitable for outdoor use when operating a power
tool outdoors. Using the proper extension cord reduces the risk of electric shock.

SERVICE

• This battery charger should be serviced by a qualified service technician, using identical
replacement parts. This will ensure that the safety of the charger is maintained.

SPECIFIC SAFETY RULES FOR THE CHARGER

ѥ WARNING: To reduce the risk of electric shock or damage to the charger and the

battery, charge only recommend rechargeable batteries as specifically designated on your
charger. Other types of batteries may burst, causing personal injury or damage.

• For indoor use only.

• Dry location use only.

• Risk of fire and electric shock.

• Risk of injury.

• Charge only with Mastercraft

®

Maximum Batteries (054-3105-6,054-2962-0,
054-1254-2, 054-3104-8, 054-3106-4). Other types of battery packs may burst,
causing injury to persons and damage.

• Before using the battery charger, carefully read all instructions and cautionary
markings in this manual, on the battery charger, on the battery, and on the tool that
is powered by the battery, in order to prevent misuse of the products and possible
injury or damage.

• Do not use the charger outdoors, and do not expose it to wet or damp conditions.

Water entering the charger will increase the risk of electric shock.

• The use of any attachment that is not recommended or sold by the manufacturer
of the battery charger may result in a risk of fire, electric shock, or personal injury.

Following this rule will reduce the risk of electric shock, fire, and serious personal injury.

• Do not abuse the cord or the charger. Do not use the cord to carry the charger or
to disconnect the charger from the outlet. Doing so may cause damage to the cord
or the charger, which may create an electric shock hazard. Replace a damaged cord
immediately.

• Verify that the cord is positioned so that it will not be stepped on, tripped over,
come into contact with sharp edges or moving parts, or otherwise be subjected to
damage or stress. This will reduce the risk of accidental falls, which could cause injury

and damage to the cord, and may result in electric shock.