Mastercam X6 User Manual

Files and Mastercam

mastercam x getting started tutorials

Files and
Mastercam

December 2011

Be sure you have the latest information!

Information might have been changed or added since this document was
published. Contact your local Reseller for the latest information.

II • FILES AND MASTERCAM

Mastercam® X6 Files & Mastercam

Date: December 2011
Copyright © 2011 CNC Software, Inc.— All rights reserved.
First Printing: December 2011
Software: Mastercam X6

TERMS OF USE

Use of this d ocument is subject t o the Mas tercam End Us er Licens e Agree ment.
A copy of the Mastercam End User License Agreement is included with the
Mastercam product package of which this document is part. The Mastercam
End User License Agreement can also be found at:

www.mastercam.com/legal/licenseagreement/

Contents

Introduction....................................................................................................... 1

X Tutorial Goals................................................................................................. 1

1. Opening Files......................................................................... 5

X Lesson Goals ................................................................................................. 5

X Exercise 1: Opening a Mastercam Version 9 File .................................. 5

X Exercise 2: Opening Other File Types.................................................... 7

X Exercise 3: Setting the Default Editor.................................................... 9

X Exercise 4: Importing Multiple Files .................................................... 13

2. Saving Files......................................................................... 17

X Lesson Goals ............................................................................................... 17

X Exercise 1: Saving Patterns (Save Some) ........................................... 17

X Exercise 2: Setting Up AutoSave and Backup..................................... 19

3. Exporting Files .................................................................... 23

X Lesson Goals ............................................................................................... 23

X Exercise 1: Exporting a single file........................................................ 23

X Exercise 2: Exporting multiple files .................................................... 25

Conclusion......................................................................................................... 27

X Mastercam Resources ............................................................................... 27

X Mastercam Documentation ....................................................................... 29

IV • FILES AND MASTERCAM

INTRODUCTION

A core function of most software is the ability to save and load files. Mastercam not
only saves and loads its own file types, but also many other common file formats,
including, but not limited to, the following:

 SolidWorks  CATIA

 AutoCAD  IGES

 Parasolid  Pro/E

 Solid Edge  Alibre

 Autodesk Inventor  Cadkey

 SpaceClaim  Rhino

Loading and saving native Mastercam files is as easy
as selecting one of the file commands, shown to the
right. Opening and saving other types of files,
although the files must be converted, is almost as
easy.

Note: Loading and saving native Mastercam
files is as easy as selecting one of the file
commands, shown to the right. Opening and
saving other types of files, although the files
must be converted, is almost as easy.

Tutorial Goals

 Open older Mastercam files.

 Open files from other software packages such as SolidWorks®.

 Select a default editor for external (non-Mastercam) files.

 Save selected geometry to a file.

 Set up Mastercam to save and backup files automatically.

 Export Mastercam files to different file types.

2 • TUTORIAL GOALS

IMPORTANT: Screen colors in the tutorial pictures were modified to

enhance image quality; they may not match your Mastercam settings or
the tutorial results. These color differences do not affect the lesson or
the exercise results.

General Tutorial Requirements

All Mastercam tutorials have the following general requirements:

 Yo u m us t b e c om f or t ab l e u si n g th e W i nd ow s

 The tutorials cannot be used with Mastercam Demo/Home Learning

Edition (HLE). The Demo/HLE file format (
Mastercam (
conversions and posting, are unavailable.

MCX-6), and basic Mastercam functions, such as file

 Each lesson in the tutorial builds on the mastery of preceding lesson’s skills.

We r ecommen d that y ou comp le te the m in or de r.

 Focus Series and Exploring Series tutorials require, at minimum, a mastery of

the basic Mastercam skills taught in the Getting Started Series modules. A
general knowledge of machining principals and practices is also required.

 Yo u mu s t h av e a s ea t o f M as t er ca m X 6 D esign or higher to complete most of

the tutorials in the Getting Started Series.

 The Basic 2D Machining module in the Getting Started Series requires, at

minimum, a seat of Mill Entry or Router Entry.

 The Basic 3D Machining module in the Getting Started Series requires Mill

Level 3 or Router Pro.

 Additional files may accompany a tutorial. Unless the tutorial provides

specific instructions on where to place these files, store them in a folder that
can be accessed from the Mastercam workstation, either with the tutorial or
in any location that you prefer.

 The Getting Started Series tutorials are available in an Adobe

compatible video format. Additional tutorial videos may also be available.
Contact your local Mastercam Reseller for more information.

 Yo u m us t i ns t al l A d ob e F la s h Pl a ye r t o d i sp l ay t u to r ia l v i de o s. Yo u c a n

download Adobe Flash Player from www.adobe.com

®

operating system.

EMCX-6) is different from

®

Flash®

.

FILES AND MASTERCAM

INTRODUCTION • 3

 All Mastercam tutorials require you to configure Mastercam to work in a

default metric or English configuration. The tutorial provides instructions
for loading the appropriate configuration file.

FILES AND MASTERCAM

4 • TUTORIAL GOALS

FILES AND MASTERCAM

LESSON 1

1Opening Files

Files that can be opened with Mastercam include not only Mastercam’s own MCX
files, but also files saved from other software packages or from previous versions of
Mastercam. From within Mastercam, you can even open specific files into third­party editors of your choice.

Lesson Goals

 Open files from a previous version of Mastercam.

 Open files from other software packages.

 Select an editor for external (non-importable) files.

Exercise 1: Opening a Mastercam Version 9 File

Moving your Mastercam Version 9 parts to Mastercam X is as easy as opening a file,
as this exercise demonstrates.

1 Choose File, Open from

Mastercam’s menu bar.

2 In the Open dialog box, select

Mastercam V9 Files (*.MC9) from
the drop-down.

The dialog box now displays only
MC9 files.

6 • OPENING A MASTERCAM VERSION 9 FILE

3 Navigate to Housing_MM.MC9,

which was provided with this
tutorial.

4 Double-click the file, or single-click the file and click Open.

Note: If you did not switch to a metric configuration file, Mastercam
prompts you to switch to metric. Click OK to continue.

Mastercam converts and loads the file, including not only geometry, but also
machining operations, as seen in the following picture.

TIP: To c o n v er t al l t h e f i le s i n a f ol d e r, c h o o se File, Update Folder from
the Mastercam menu.

FILES AND MASTERCAM

OPENING FILES • 7

Exercise 2: Opening Other File Types

Importing files from other applications such as SolidWorks is similar to opening
native Mastercam files. You might, however, need to sp ecif y h ow Ma ster cam im por ts
elements of the file. In this exercise, you learn how file importing works, as you
convert a SolidWorks file to a Mastercam part.

1 Choose File, Open from

Mastercam’s menu bar.

2 In the Open dialog box, select

SolidWorks Files
(*.SLDPRT;*.SLDASM) from the

drop-down.

The dialog now displays only
SolidWorks parts.

3 Navigate to the tutorial part

Collet_2005.SLDPRT.

4 Click the file to select it. (Do not double-click.)

5 Click the Options button.

6 In the SolidWorks File Parameters dialog box, set Scale to Inches to MM.

FILES AND MASTERCAM

8 • OPENING OTHER FILE TYPES

This setting converts an inch file to a millimeter file.

7 Notice the other SolidWorks

parameters that you can control. To
learn more, click the dialog box’s
Help button.

8 Click OK to close the dialog box and finalize your choices.

9 In the Open dialog box, click Open. Mastercam converts and opens the part.

FILES AND MASTERCAM

OPENING FILES • 9

10 From the Mastercam menu, choose View, Standard Views, Isometric

(WCS) and then View, Fit to see the entire part in Mastercam’s graphics
window.

For more information on views, please refer to Mastercam Help or to the
Wor kin g in the Gr aph ics Win dow tutorial, also part of the Getting Started
series.

Exercise 3: Setting the Default Editor

Sometimes, you need to open a file type not supported by Mastercam. In this
instance, you can choose an editor to associate with the file. This exercise shows
how.

1 From the Mastercam menu, choose

File, Edit/Open External.

FILES AND MASTERCAM

10 • SETTING THE DEFAULT EDITOR

2 In the Open dialog box, click the

Editor button.

3 In the Choose File Editor dialog

box, select Notepad from the drop­down list, and click OK.

4 Navigate to and select the tutorial

file

EditBosses.vbs, and click

Open.

Mastercam opens the file in
Notepad, as shown in the following
picture.

5 Close Notepad by clicking the red X button in the upper right corner of the

dialog box.

FILES AND MASTERCAM

OPENING FILES • 11

6 Choose File, Edit/Open External again.

7 In the Open dialog box, click the Editor button.

8 Select Mastercam from the drop-

down list, and click OK.

9 Navigate to and select the tutorial file EditBosses.vbs again, and click

Open.

FILES AND MASTERCAM

12 • SETTING THE DEFAULT EDITOR

10 Mastercam now opens the file in Mastercam X Editor, as shown in the

following picture.

11 Close Mastercam Editor by clicking the red X button in the upper right

corner of the dialog box.

TIP: To a u t o ma t i ca l ly o p en a fi l e
with its associated editor (for
example, to open a .DOC file with
Microsoft Word), set the Open
dialog box’s Open as option to
Auto.

FILES AND MASTERCAM

OPENING FILES • 13

Exercise 4: Importing Multiple Files

When you have many files to import into Mastercam, you can convert them all at
once using the Import folder command.

1 From the Mastercam menu, choose

File, Import folder.

2 In the Import folder dialog box,

select SolidWorks Files
(*.SLDPRT;*.SLDASM) from the
Import from files of type drop-

down list.

FILES AND MASTERCAM

14 • IMPORTING MULTIPLE FILES

3 Click the Browse button to the

right of the From this folder box.

4 Use the Browse For Folder dialog

box to select the location where you
stored the tutorial files, and click
OK.

5 Click the Browse button to the

right of the To t h i s f o l de r box.

FILES AND MASTERCAM

6 Select your Mastercam installation’s

\mcx directory located within your

\My Documents\my mcamx6
folder, and click OK.

7 Click Import in the Import folder

dialog box.

Mastercam converts all SolidWorks
files in the selected tutorial files
directory, but does not display the
converted files in the graphics
window. (In this instance, there is
only one.) You can find the resulting
MCX files in the

\mcx folder.

OPENING FILES • 15

FILES AND MASTERCAM

16 • IMPORTING MULTIPLE FILES

FILES AND MASTERCAM

LESSON 2

2Saving Files

Usually, you use the File, Save or File, Save As commands to save a Mastercam part
file. As you see in this lesson, however, Mastercam can save files in several different
formats.

Lesson Goals

 Save only selected entities to a file.

 Set up Mastercam to save files automatically.

 Keep backups of previous versions of your files.

 Store AutoSave and Backup settings for future Mastercam sessions.

Exercise 1: Saving Patterns (Save Some)

A pattern is a set of reusable entities. For example, you may have a bolt that you use
in many different parts. By saving that bolt as a pattern, you can merge it with your
other parts as needed. For more information on patterns, please see Mastercam
Help.

When you save a Mastercam part, you can choose to save the entire file or to save
only selected entities. Saving a set of selected entities is one way to create a pattern
from a part file. This exercise demonstrates the File, Save Some command, which
lets you choose the entities to save.

1 Open the tutorial part 2D_CHAMFER_MM.MCX-6.

Note: In the Open dialog box, you might first need to change your Files of
type setting back to Mastercam X6 Files (*.MCX-6).)

18 • SAVING PATTERNS (SAVE SOME)

2 Choose File, Save Some from

Mastercam’s menu bar.

3 Click the five arcs shown in the picture below. The arcs change color once

they are selected.

4 Press [Enter] to accept the selection.

5 In the Save As dialog box’s File name field, enter 2D_CHAMFER_ARCS.MCX-6.

6 Click Save, or press [Enter], to save the file. Mastercam saves only the

selected arcs.

FILES AND MASTERCAM

SAVING FILES • 19

7 Open 2D_CHAMFER_ARCS.MCX-6, and notice that it contains only the arcs

that you selected.

Note: If you are prompted to save changes to the 2D_CHAMFER_MM.MCX-6
file, choose No.

Exercise 2: Setting Up AutoSave and Backup

When working on a part, you might forget to save the file as often as you should.
Luckily, Mastercam can save your work for you, at intervals that you specify.
Mastercam can even save different versions of your files as backups. Complete the
following exercise to see how Mastercam’s AutoSave and Backup features work.

1 Choose Settings, Configuration

from the Mastercam menu.

FILES AND MASTERCAM

20 • SETTING UP AUTOSAVE AND BACKUP

2 Expand the Files category in the

System Configuration dialog box,
and select the AutoSave/Backup
subentry.

3 Perform the following actions:

 Select the AutoSave check box to activate the AutoSave options.

 Typ e 10 into the Interval (in minutes) field.

 Select the MCX Backup Files check box to activate the automatic backup

feature.

4 Click the Help button to learn more

about the AutoSave and Backup
options.

5 Close the Help window.

FILES AND MASTERCAM

SAVING FILES • 21

6 Click OK in the System Configuration dialog box, and answer Yes when

Mastercam asks if you want to save your settings.

Yo u h av e n ow s e t u p M as te r ca m a s f ol l ow s :

 Mastercam will save your work automatically every 10 minutes.

 Mastercam will keep the 10 most recent versions of your file.

 Mastercam will use the new AutoSave and Backup settings for all

sessions that use this configuration file.

TIP: Yo u c an f in d y o u r b ac k u p f i le s i n th e f o l de r sp e ci f i ed o n t he F il e s
page of the System Configuration dialog box, as shown below. Click the
numbered items to see the path displayed in the Selected Item box.

FILES AND MASTERCAM

22 • SETTING UP AUTOSAVE AND BACKUP

FILES AND MASTERCAM

LESSON 3

3Exporting Files

Exporting a file from Mastercam to a format compatible with another software
package is similar to saving a regular Mastercam file. When exporting, however, you
might need to set a few options so that you get the type of file you expect. (In most
cases, you need only select the software version to which you are exporting the file.)
In this lesson, you learn to convert files from one format to another.

Lesson Goals

 Save a single file in a format other than Mastercam MCX.

 Set file options for specific file types.

 Convert a set of files to another format.

Exercise 1: Exporting a single file

1 Open the tutorial file

2D_CHAMFER_MM.MCX-6.

2 Choose File, Save As from

Mastercam’s menu.

3 In the Save As dialog box, select StereoLithography Files (*.STL) in the

Save as type drop-down list.

24 • EXPORTING A SINGLE FILE

4 Click the Options button.

5 In the Save as an STL File dialog

box, select the ASCII option.

6 Click the dialog box’s Help button

to learn more about the STL
options.

7 Close the Help window.

8 Click OK to close the Save as an STL File dialog box.

9 Click Save in the Save As dialog box.

Mastercam saves the file in ASCII StereoLithography format.

FILES AND MASTERCAM

EXPORTING FILES • 25

TIP: Because the Stereolithography file is ASCII, you can view it with any

text editor, such as Notepad, as seen below.

Exercise 2: Exporting multiple files

When you have many Mastercam files to export to a different format, you can
convert them simultaneously using the Export folder command. This exercise
demonstrates how this powerful function works.

1 Choose File, Export folder from Mastercam’s menu.

FILES AND MASTERCAM

26 • EXPORTING MULTIPLE FILES

2 In the Export folder dialog box,

choose StereoLithography Files
(*.STL) from the Export to files of
type drop-down list.

3 Click the Browse button to the

right of the From this folder box.

4 Use the Browse For Folder dialog

box to select the directory where
you stored the tutorial parts, and
click OK.

5 Click the Browse button to the

right of the To t h i s d i r ec t or y box.

6 Select your Mastercam installation’s

\mcx directory, and click OK.

FILES AND MASTERCAM

EXPORTING FILES • 27

7 Click Export in the Export folder

dialog box.

Mastercam converts the files in the
selected tutorial folder. You can find
the resulting STL files in your
folder.

\mcx

Conclusion

Congratulations! You have completed the Files and Mastercam tutorial. Now that
you have mastered the skills in this tutorial, explore Mastercam’s other features and
functions. Additional tutorials may be available in this or other series.

This is a module of the Mastercam Getting Started Tutorial Series. The series intro­duces general Mastercam functions and teaches basic skills for getting started with
Mastercam. Other tutorial series include:

 Focus Series: Focuses on a specific Mastercam feature—for example, Setup

Sheets or FBM Drill, and teaches basic and advanced skills.

 Exploring Series: Explores a single Mastercam product—for example

Mastercam
depth skills for working with the product.

The Mastercam tutorial series is in continual development, and we will add modules
as we complete them. For information and availability or for further training, please
contact your local Mastercam Reseller.

®

for SolidWorks® or Mastercam Swiss Expert, and teaches in-

Mastercam Resources

Enhance your Mastercam experience by using the following resources:

 Mastercam Help—Access Mastercam Help by selecting Help, Contents from

Mastercam’s menu bar or by pressing [Alt+H] on your keyboard. Also, most

FILES AND MASTERCAM

28 • MASTERCAM RESOURCES

dialog boxes and ribbon bars feature a Help button that opens Mastercam

Help directly to related information.

 Mastercam Reseller—Your local Mastercam Reseller can help with most

questions about Mastercam.

 Te ch n i ca l S u pp o r t—CNC Software’s Technical Support department (860-

875-5006 or [e-mail]

) is open Monday through Friday

from 8:00 a.m. to 5:30 p.m. USA Eastern Standard Time.

 Mastercam University—CNC Software sponsors Mastercam University, an

affordable online learning platform that gives you 24/7 access to Mastercam
training materials. Take advantage of more than 180 videos to master your
skills at your own pace and help prepare yourself for Mastercam
Certification. For more information on Mastercam University, please
contact your Authorized Mastercam Reseller, visit www.mastercamu.com
or email [e-mail]

.

 Online communities—You can search for information or ask questions on

the Mastercam Web forum, located at www.emastercam.com

. You can also
find a wealth of information, including many videos, at

www.mastercam.com

and www.mastercamedu.com.

For tech tips and the latest Mastercam news, you can join us on Facebook
(www.facebook.com/mastercam), follow us on Twitter (www.twitter.com/

mastercam), and subscribe to our blog, Mastercam Xtras (http://

,

FILES AND MASTERCAM

EXPORTING FILES • 29

blog.mastercam.com). Visit our YouTube channel to see Mastercam in

action (www.youtube.com/user/MastercamCadCam

)!

Mastercam Documentation

Mastercam installs the following documents in the \Documentation folder of your

Mastercam installation:

 Mastercam X6 Quick Start

 Mastercam X6 Administrator Guide

 Mastercam X6 Transition Guide

 Mastercam X6 Quick Reference Card

 Mastercam X6 File Location Card

 Mastercam X6 Post Debugger User’s Guide

Contact Us

For questions about this or other Mastercam documentation, contact the Technical

Documentation department by email at [e-mail]

.

FILES AND MASTERCAM

30 • MASTERCAM DOCUMENTATION

FILES AND MASTERCAM

671 Old Post Road
Tolland, CT 06084 USA
www.mastercam.com

Printed in the USA on 100% Post Consumer Waste, FSC Stocks

Attention! Updates may be available.

Go to Mastercam.com/Support for the latest downloads.