GRIZZLY & GRIZZLY CUB
GrandMAC Series Outdoor Fireplace & Grill
MODELS GMFP20, GMFP20S, GMFP28, GMFP28S
ASSEMBLY & OPERATING INSTRUCTIONS
WARNING & SAFETY INFORMATION
450 Brown Avenue
Columbus, Georgia 31906
Masterbuilt Outdoor Products has made every effort to provide you
with a quality, long-lasting, trouble-free product.
In the event of a problem, please call our toll free number
1-800-489-1581
Thank You for purchasing this Masterbuilt product.
WARNING:
FOR OUTDOOR USE ONLY. Carbon Monoxide Hazard (See Serial
Plate On Unit). Never use indoors (home, garage, enclosed porch,
tent). Keep the fireplace away from buildings, garages, flammable
materials, flammable fluids and automobiles while in use.
Do not leave unit unattended at any time.
1. Never use indoors. Outdoor use only.
2. Use a commercially prepared fire starter only. Do not use gasoline, alcohol or
other highly volatile fluids to ignite charcoal. Do not use excessive lighter
fluid.
3. Do not use water to extinguish the fire, as this will damage the finish.
4. Close all vents to extinguish coals.
5. As with any fireplace, care must be taken to prevent heat damage to any-
thing around or under the fireplace.
6. Keep away from flammable material and fluids such as gasoline, alcohol,
diesel fuels, kerosene, charcoal lighter fluid and/or automobiles.
7. Do not allow children to use the fireplace. Keep children and pets away from
fireplace when in use.
8. Never overfill charcoal bowl. May damage the unit and cause serious or
fatal injury.
9. Do not wear flammable or loose clothing when using fireplace.
1O. Do not store the fireplace with the ashes or combustible materials inside.
Do not store the fireplace until the fire is completely out and all surfaces
are cold.
11. Use heat protective gloves when handling the fireplace and handling the fire.
Use protective gloves or long sturdy fireplace tools when adding wood or
charcoal.
12. Always use in accordance with all applicable local and national fire codes.
Use on non-combustible surfaces such as concrete, brick and rock.
Masterbuilt Outdoor Products
WARRANTY INFORMATION
To validate your warranty, please fill out and return this portion
within 30 days of the date of purchase.
Send to:
Masterbuilt Outdoor Products
450 Brown Avenue,
Columbus, Georgia 31906
1. Name________________________________________________________
2. Address______________________________________________________
City__________________________________________________________
State____________________________________Zip__________________
3. Dealer’s Name_________________________________________________
4. Dealer’s Location_______________________________________________
5. Date of Purchase_______________________________________________
6. What brands of outdoor cookers have you previously owned? (Optional)
_____________________________________________________________
7. Serial # ______________________and/or Model # ___________________
Thank you for your purchase and filling out this warranty questionnaire.
10
WARNING:
CAUTION:
Never move the unit while in use. If moving becomes necessary, do not touch
body or lid as they may be very hot.
GENERAL INSTRUCTIONS FOR
SAFE USE OF FIREPLACE:
1. Do not burn trash, leaves, paper, cardboard or plywood in the fireplace.
The use of seasoned hardwood is recommended. Avoid using softwood
such as pine or cedar because they are likely to throw sparks.
2. Keep all screws and nuts tight to be sure fireplace is in safe working condition. Inspect on regular basis to ensure that the fireplace is operational.
NOTE: After repeated use, a discoloration of the metal may occur
WARRANTY INFORMATION:
Masterbuilt Outdoor Products warrants the GrandMAC Series GRIZZLY OUTDOOR
FIREPLACE (GMFP28, GMFP28S) and the GrandMAC Series GRIZZLY CUB OUTDOOR FIREPLACE (GMFP20, GMFP20S) to be free from defects in material and workmanship for one year. his Masterbuilt Outdoor Products warranty does not cover rust of
the unit. Within this period, Masterbuilt Outdoor Products shall correct any defect by
repairing or replacing defective parts of the equipment.
Masterbuilt Outdoor Products requires reasonable proof of purchase and suggests that
you keep your receipt. Failure to complete and return warranty information will make
product warranty null and void. Upon the expiration of such warranty, all such liability
shall terminate.
This warranty does not include the cost of property damage due to the failure of the product and does not cover damage due to the misuse, abuse, accident, damage arising out
of transportation, or damage incurred through commercial use of this product. THIS
EXPRESS WARRANTY IS THE SOLE WARRANTY GIVEN BY THE MANUFACTURER
AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. Neither Masterbuilt Outdoor Products nor the retail establishment selling this
product, has authority to make any warranties or to promise remedies in addition to or
inconsistent with those stated above. Masterbuilt Outdoor Products maximum liability, in
any event, shall not exceed the purchase price of the product paid by the original consumer/ purchaser. Some states do not allow the exclusion or limitation of incidental or
consequential damages. In such a case, the above limitations or exclusions may not be
applicable.
Not withstanding this limitation of warranty, the following specific restrictions apply for
California residents. If service, repair, or replacement of the product is not commercially
practicable, the retailer selling the product or Masterbuilt Outdoor Products will refund the
purchase price paid for the product, less the amount directly attributable to use by the
original buyer prior to the discovery of the nonconformity. In the state of California only,
you may take the product to the retail establishment selling this product, in order to obtain
performance under warranty.
This expressed warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
NOTE: Paint finish may burn off under normal use and therefore it carries no warranty.
29
CARBON MONOXIDE HAZARD
Burning charcoal gives off carbon monoxide, which has no
odor and can kill you. DO NOT burn charcoal inside homes,
vehicles or tents. Use only in well ventilated areas.
WARNING
LEGS
FIRE
SCREEN
STEP 6 (GRIZZLY)
Attach AIR DAMPERS:
Connect AIR DAMPERS to LID (H)
by threading AIR DAMPER TOPS (U)
and AIR DAMPER BASES (V)
with SMALL AIR DAMPER BOLTS (T)
and WING NUTS (W).
STORAGE (BOTH MODELS):
FIRE SCREEN can be stored inside the LID and
BASE on both models. The LEGS can be stored
inside the LID and BASE in the GRIZZLYCUB.
WARNING: Do not move while in use. If moving
becomes necessary, use caution and protective
gloves when handling fireplace.
T
U
V
W
H
PARTS LIST/IDENTIFICATION:
PART NUMBER DESCRIPTION QUANTITY
A SHORT BOLTS
4 (GRIZZLY), 2 (GRIZZLY CUB)
B, BB HANDLES, HANDLE BRACKET 2
C LONG BOLTS 2
D (GRIZZLY) LID HANGER BRACKET 1
E SMALL WASHER 12
F NUTS 12
G (GRIZZLY CUB) LID HANGER BRACKET 1
H THE LID 1
I LOCK WASHERS 10
J FIRE SCREEN 1
K COOKING GRILL 1
L THE BOWL 1
M BOWL HANDLE BRACKET 1
N (GRIZZLY) WHEEL SUPPORT AXLE 1
O (GRIZZLY) TUBE LEG 1
P (GRIZZLY) WHEEL TUBE LEG 1
Q (GRIZZLY) LARGE NUTS FOR WHEELS 2
R (GRIZZLY) WHEEL 2
S BOLTS 6
T SMALL AIR DAMPER BOLT 1
U AIR DAMPER TOP 2
V AIR DAMPER BASE 2
W WING NUT 2
X WOOD GRATE 1
Y (GRIZZLY CUB) LOCKING LEGS (SMALL) 4
Z FEET
2 (GRIZZLY), 4 (GRIZZLY CUB)
AA STABILIZER PLATE 1
Please read all instructions and warnings before assembly.
TOOLS REQUIRED:
Phillips head screwdriver
Crescent wrench or socket wrench set.
NOTE: Do not completely tighten screws until the assembly is complete.
For easier assembly we recommend two people assemble this product.
8
STEP 5 (GRIZZLY)
Attach HANDLE to LID:
First thread a LONG BOLT (C) through HANDLE (B) and HANDLE BRACKET (BB),
and fasten with a SMALL WASHER (E) and a NUT (F).
Next, attach HANDLE to LID (H) and the LID HANGER BRACKET (D) to inside
of LID (H) using two (2) BOLTS (A), SMALLWASHERS (E), LOCK WASHERS (I)
and NUTS (F).
STEP 5 (GRIZZLY CUB)
Attach HANDLE to LID:
First thread a LONG BOLT (C) through HANDLE (B) and HANDLE BRACKET (BB),
and fasten with a SMALL WASHER (E) and a NUT (F).
Next, attach HANDLE to LID (H) and the LID HANGER BRACKET (G) to inside
of LID (H) using two (2) BOLTS (A), SMALLWASHERS (E), LOCK WASHERS (I)
and NUTS (F).
E
F
A BBBC
G
E,I,F
A
H
E
F
BBBC
E,I,F
D
WARNING:
FIREPLACE IS FOR OUTDOOR USE ONLY! DO NOT USE FIREPLACE
INDOORS! INDOOR USE CAN BE FATALTO HUMANS AND/OR OR PETS.
ASSEMBLY INSTRUCTIONS:
A
T
U
V
W
E
F
B BBBBC
D
H
J
E,I,F
L
Z
Z
Y
A
C
M
B
N
O
P
S
S
Q
Q
R
R
E.I.F
AA
E.I.F
K
X
E
F
G
A B C
E,I,F
THE GRIZZLY CUB
GMFP20, GMFP20S
THE GRIZZLY
GMFP28, GMFP28S
Please assemble fireplace
in order of instructions.
47
STEP 3 (GRIZZLY)
Attach HANDLE to BOWL:
NOTE: TUBE LEG (O) should be located
directly behind holes on front of BOWL (L)
First thread a LONG BOLT(C) through
HANDLE (B) and BOWL HANDLE
BRACKET (M), and fasten with a
NUT (F) and a SMALL WASHER (E).
Next, attach HANDLE to BOWL (L) using
two (2) BOLTS (A), SMALLWASHERS (E),
LOCK WASHERS (I) and NUTS (F).
A
B
C
M
E.I.F
L
J
K
X
L
STEP 4 (BOTH MODELS)
Add GRATES and FIRE SCREEN:
Add WOOD GRATE (X), and FIRE SCREEN (J)
or GRILL RACK (K). FIRE SCREEN (J) should fit
securely inside lip of BOWL (L). Make sure to lock
FIRE SCREEN into place with clips.
WARNING: FIRE SCREEN (J) and GRILL RACK (K)
should never be used at same time.
STEP 1 (GRIZZLY):
Leg Assembly
Thread WHEEL SUPPORTAXLE (N)
through opening in WHEEL TUBE LEG (P)
then attach WHEELS (R) to SUPPORT
AXLE (N) with LARGE NUT FOR
WHEELS (Q).
Next, place FEET (Z) on
TUBE LEG (O).
STEP 1 (GRIZZLY CUB):
Leg Assembly
Place FEET (Z) on LOCKING LEGS (Y), then
attach LOCKING LEGS (Y) to BOWL (L).
LOCKING LEGS (Y) should snap into place.
O
Z
P
Q
Q
R
R
N
L
Z
Y
STEP 2 (GRIZZLY):
Attach legs to BOWL
NOTE: Make sure to thread bolts downward
through center holes in BOWL (L) toward ground.
First attach TUBE LEG (O) and
WHEEL TUBE LEG (P) to BOWL (L)
with four (4) BOLTS (S), and fasten with
SMALL WASHERS (E), LOCK WASHERS (I)
and NUTS (F), through outer holes.
Next attach LEGS together with STABILIZER
PLATE (AA). Use two (2) BOLTS (S), SMALL
WASHERS (E), LOCK WASHERS (I) and NUTS (F).
L
O
P
S
S
E.I.F
AA
65
Loading...