Master-Bilt OMC-082 User Manual

OMC-122

ITEM NO. ______________________________________________________

PROJECT ______________________________________________________

LOCATION _____________________________________________________

DATE _________________________ QTY. ___________________________

OMC SERIES

Cold Wall Evaporator Open Front Milk Coolers

MODELS

❑ OMC-082 ❑ OMC-122 ❑ OMC-162

FEATURES

CONSTRUCTION

• White enamel painted steel exterior

• Galvanized steel interior including door interior

• Four 4" easy-roll swivel casters (two locking)

• Epoxy-coated heavy-duty oor racks (stainless steel option available)

• Reinforced base to maintain cooler integrity when fully loaded

• 2

/2" berglass insulation

• NSF-listed oor drain

• NSF-listed thermometer

DOOR

• Self service doors with stainless steel exterior

• Fold-back door is locking and insulated

• Door equipped with gaskets and chrome plated hinges

• Designed to be easily opened by children for self-service

REFRIGERATION

• Self-contained, bottom mount

• Powerful, large-capacity system allows cooler to maintain proper temperature for longer amount of time with doors open

CAPACITY

CASES WITH CARTONS

13" x 13" x 11"H 19" x 13" x 11"H

MODEL

OMC-082 8 352 4 288 864 432 OMC-122 12 528 8 576 1368 684 OMC-162 16 704 12 864 1800 900

CASES CARTONS CASES CARTONS 1/2 PINT 1 PINT

LOOSE CARTON

(WITHOUT CASES)

• Cold wall evaporator with no moving parts which allows more storage space

• Back of cabinet may be placed against wall but there must be a minimum 4" clearance between cabinet sides and wall

• Refrigerant: R-22

• Operating temperature: 38°F (3°C)

WARRANTY

• Standard limited three year extended compressor and two year limited parts and labor

OPTIONS

❑ Add "SS" for stainless steel

interior and exterior

❑ Laminate for top, front, sides

and back

❑ (4) six-inch adjustable legs ❑ Strip curtain ❑ Stainless steel oor rack ❑ Corner bumpers

908 Highway 15 North • New Albany, MS 38652 PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com

OMC SERIES

LISTINGS

HOOKUP

BID SPECIFICATIONS

COLD WALL EVAPORATOR OPEN FRONT MILK COOLERS

TECHNICAL SPECIFICATIONS

DIMENSIONS

(in.)

MODEL

OMC-082 35 34 44 889 864 1118 115 5.0 1/5 2 12.2 36.7 326/148 OMC-122 49 34 44 1245 864 1118 115 5.0 1/5 3 17.8 49.9 352/160 OMC-162 63 34 44 1600 864 1118 115 5.0 1/5 4 23.5 64.0 484/220

DIMENSIONS

(mm)

VOLTS AMPS

UNIT

H.P.

NO. OF FLOOR RACKS

CAP.

CU. FT.

SHIP

CU. FT.

SHIP

WT.

LB/KGL D H* L D H*

*Height includes casters.

SIDE VIEW OMC-082

ELEVATION VIEW

OMC-122

ELEVATION VIEW

OMC-162

ELEVATION VIEW

Item no. OMC- __ ________ _____ Provide______ ________ _( ) Cold Wall Evaporator Open Front Milk Cooler(s), Master-Bilt model no. OMC-___.

Milk cooler to be constructed of white painted steel on the exterior with galvanized steel interior. Door to be stainless steel on the exterior with galvanized steel interior. Door will also be a fold-back type and will be locking and insulated. In ad-

NOTE: Cabinet designed for optimum performance in air-conditioned area at 75°F ambient and 55% relative humidity. All specications subject to change without notice.

Via plug in, 7 foot long exible three wire 16 gauge cord with

NEMA 5-15P

molded plug.

dition, door will be equipped with gaskets and chrome plated hinges.

Cooler to be provided with four swivel casters (two locking) and an NSF-listed oor drain and thermometer. Additionally, cooler will contain heavy-duty epoxycoated oor racks and a reinforced base to maintain cooler integrity when fully loaded. Insulation will consist of 21/2" thick berglass.

908 Highway 15 North • New Albany, MS 38652 PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com

The refrigeration system will be selfcontained, bottom mounted with a cold wall evaporator. System will contain R-22 refrigerant. The operating temperature will be 38°F (3°C).

Cooler to have standard limited three year extended compressor warranty and two year limited parts and labor warranty.

Cooler to be UL and C-UL listed as well as UL EPH classied.

1246-6/10-web