Master-Bilt DD-46LCG User Manual
ITEM NO. ______________________________________________________
PROJECT ______________________________________________________
LOCATION _____________________________________________________
DATE _________________________ QTY. ___________________________
DD-LCG SERIES
Low Curved Glass
Deluxe Ice Cream
Dipping/Display
Merchandisers
FEATURES
FEATURES
STANDARD TEXTURED FINISH
Standard
white
CONSTRUCTION
• Standard electronic controller that
decreases service time and calls and
also eliminates room thermostat
• Attractive, contemporary design
• Curved front glass is heated to
prevent fogging and maximize
product visibility
• 24 gauge painted textured interior
and exterior
• Equipped with leveling legs to cor-
rect for unlevel flooring situations
• Rear air intake and discharge elimi-
nates front grille and allows full
front of cabinet for graphics
Black also
available
DD-88LCG
MODELS
❑ DD-46LCG
❑ DD-66LCG
❑ DD-88LCG
• Independent on/off compressor and
light switch
• Stainless steel top and attached
superstructure
• Tempered plate glass viewing window
• Brilliant interior LED lighting
• Drain with garden hose connector
for ease of cleaning
• Stainless steel serving deck
• Heavy-duty epoxy-coated wire can
support racks
• 9 ft. long cord with molded plug
1
• 2
/4" foamed-in-place “zero ODP”
urethane insulation
LIDS
• Hinged, high-tensile, transparent
acrylic dipping compartment lids
with full length handle
REFRIGERATION
• Cold wall evaporator
• Low maintenance bare tube condenser coil
• Refrigerant:
– DD-46LCG .......................... R-134a
– DD-66LCG, DD-88LCG ......R-404A
• No minimum clearance required on
cabinet sides but front, back and top
must be left open for customer and
operator access
• Temperature range:
5° to -5°F (-15° to -21°C)
• R-factor (insulation efficiency rating): 19.40
WARRANTY
• Standard limited two year parts and
labor
• Additional three year coverage on
compressor part
OPTIONS
❑ Rear service doors (factory in-
stalled)
❑ Custom colors
❑ Removable can holders with
white overnight can covers
❑ Dipper well
❑ Removable frost shields
❑ Leg kit
❑ Casters
❑ Lid locking kit (less locks)
908 Highway 15 North • New Albany, MS 38652
PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com
DD-LCG SERIES
LOW CURVED GLASS DELUXE ICE CREAM DIPPING/DISPLAY
MERCHANDISERS
TECHNICAL SPECIFICATIONS
DIMENSIONS
(in.)
MODEL
DD-46LCG 473/4273/450 1213 705 1270 115 7.5 1/2 8/4 9.6 54.0 370/168
1
DD-66LCG 69
DD-88LCG 903/4273/450 2305 705 1270 115 11.5 3/4 16/12 22.5 97.0 600/273
*Capacities in 9
/4273/450 1759 705 1270 115 9.7 1/2 12/8 16.0 76.0 495/225
1
/2" diameter, 3 gallon cans. †Measured to the load line level.
DIMENSIONS
(mm)
VOLTS AMPS
UNIT
H.P.
CAN CAP.*
DISPLAY/
STORAGE
CAP.
CU. FT.
†
SHIP
CU. FT.
SHIP
WT.
LB/KGL D H L D H
SIDE VIEWPLAN VIEW ELEVATION VIEW
LISTINGS HOOKUP
Via plug in, 9 foot long, flexible 3 wire
14/3 cord with molded plug. Drain hookup
has standard garden hose connection.
NEMA 5-15P
BID SPECIFICATIONS
Item no. DD-_______________
Provide_______________( ) Deluxe Ice
Cream Dipping/Display Merchandiser(s),
Master-Bilt® model no. DD-__________.
Cabinet will feature textured finish on
interior and exterior. Cabinet also to have
independent on/off compressor and light
switch and will be equipped with an electronically controlled monitoring system.
Cabinet to be provided with drain connec-
NOTE: Cabinet designed for optimum performance in air-conditioned area at 75°F ambient and 55% relative humidity.
All specifications subject to change without notice.
908 Highway 15 North • New Albany, MS 38652
PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com
tion, stainless steel top and superstructure,
tempered plated glass viewing window and
interior LED lighting. Cabinet is to have
rear air intake and discharge. Standard
leveling legs provided to correct for unlevel
flooring situations.
Cabinet will be provided with 9 foot
cord and molded plug.
DD-46LCG will use R-134a refrigerant
while DD-66LCG and DD-88LCG will use
R-404A refrigerant. The temperature range
will be 5° to -5°F (-15° to -21°C). All models
to be supplied with a refrigeration system
containing low maintenance bare tube condenser coil.
Cabinet to have standard limited two
year parts and labor with additional three
year coverage on compressor part.
Cabinet to be UL, C-UL and NSF listed.
©2016 Master-Bilt Products, an unincorporated division of Standex International Corporation. All rights reserved. Printed in U.S.A.
1360-6/16-web
Loading...