FORTIA Rotary Combines
Simplicity with Performance
MF
HP
300-425
VISION INNOVATION LEADERSHIP QUALITY RELIABILITY SUPPORT PRIDE COMMITMENT
9005
The ultimate in highcapacity harvesting
Crop throughput is brisk yet gentle,
thanks to the biggest rotor in the
industry, the unique Advanced
Technology Rotor (ATR) threshing
system, to get the job done faster
using less fuel. Also the MF 9795
and MF 9895 boast one of the
largest grain tanks of any combine
which, with the added bonus of the
fastest rate of discharge, means
maximum time combining.
The unique PowerFlow table
ensures grain and specialist crops
can be accommodated precisely,
while the SmartracTM lateral tilt
and header height control system
A range of innovative design and engineering features have gone
into the production of the new MF FORTIA combines, creating a
machine capable of exceptional performance and superb quality
of work. From header to straw chopper, speed and consistency
of operation, together with simplicity and efciency, are evident at
every stage of the harvesting process.
ensures top performance is
maintained over uneven or sloping
ground.
Increasingly variable weather
during the normal weeks of harvest
in recent years has highlighted
the enormous benet of using a
reliable, high-capacity combine
that can get the crop in quickly
and efciently when conditions
are right. Dependence on slower
performing machines means
combining often takes place in
inappropriate conditions, with the
resultant damage to soil structure
and the need to dramatically
02
lower grain moisture content once
harvested.
So, reduce the risk by investing in
one of the new MF FORTIA Series
combines, making the most of the
latest harvesting technology to
maintain crop quality and allow a
timely start to autumn cultivations.
03
Model range
Model Engine hp Max hp Rotor
Diameter (mm)
Rotor
Length (mm)
Cleaning
Area (m
2
)
Grain tank
(litres)
Unloading
(litres/sec)
MF 9695 300 330 700 3,556 4.36 10,570 159
MF 9795 350 380 700 3,556 5.35 12,334 159
MF 9895 425 459 800 3,556 5.35 12,334 159
The choice is yours
04
*CAT® is a registered
trademark of Caterpillar Inc.
MF FORTIA –
key features
05
The three rotary combines in the new
MF FORTIA Series – the MF 9695,
MF 9795 and the MF 9895 – offer an array
of advanced technologies, together with
simplicity of operation.
01 PowerFlow header
The renowned PowerFlow
header provides for all crops
and conditions and comes
standard with Smartrac
TM
lateral
tilt and height control system to
maintain maximum output on
sloping or uneven terrain.
02 Helical vane front feeder
Ensures gentle, even feeding
of the crop to the threshing
rotor to boost harvesting
capacity, yet minimises grain
damage, power consumption
and machine wear.
03 Advanced Technology Rotor
The Advanced Technology
Rotor (ATR) design has been
improved to provide additional
threshing capacity, improved
grain sample and reduce drive
requirements.
04 Direct discharge rotor
Elimina tes the nee d for rear
beater s or impell ers, so
reducing the horsepower
requirem ent and
maintenance time.
05 Exclusive hydrostatically
driven rotor
Simplies the combine’s design
and allows the rotor to be
reversed from the cab.
06 Constant speed rotor
Maintains rotor speed when
engine speed fluctuates
due to changes in terrain or
crop density.
07 Grain tank and unloading
All three MF FORTIA models
feature the unique Direct
High Volume (DHV) two auger
unloading system, giving a
discharge rate of 158 litres per
second.
08 Heavy-duty welded and
bolted frame
Accommodating larger grain
tank loads and cutting tables.
09 Large, spacious cab
All controls and monitors are
comfortably positioned for
the operator, while the wide
expanse of glass provides a full
view of the header.
10 Four-speed transmission
For top performance in all
conditions with the operator in
complete control.
11 Heavy-duty front axle
and nal drive
To ensure years of durable,
trouble-free service.
12 Powerful, fuel-efcient
engines
AGCO SISU POWER in the
MF 9695/9795 models, CAT
®
*
in the MF 9895. Electronicallycontrolled fuel delivery for
reduced emissions and
excellent economy.
01
02
03
04
11
12
09
07
08
06
10
05
01
02
03
04 05
PowerFlow. Yet to be
bettered
One of the PowerFlow table’s most
popular features is its ability to
switch smoothly between different
crops with only minimal adjustment
so that taller crops such as oilseed
rape, beans, oats and rye can be
harvested with ease.
Even, consistent feed
Even feed at optimum harvesting
speed means the massive rotor
is kept full at all times, allowing
maximum output to be achieved.
The PowerFlow table’s unique
system of powered belts means
crop losses are minimised and
machine blockages eliminated.
The PowerFlow also takes oilseed
rape in its stride – generating
output increases of as much as
73% over other, similar-sized
tables. A further performance
boost is achievable from the quick-
Massey Ferguson’s unique PowerFlow table has more than stood
the test of time and experience by continually out-performing other
designs on the market. With its long knife-to-auger specication
and positive belt feed, it maintains perfectly even crop feed at
optimum harvesting speeds.
06
t of a secondary rape auger and
side knives.
No time lost between elds
Both hydraulics and electrics are
disconnected simply by means of
a single, one-piece coupler, cutting
the time spent moving from eld
to eld. The PowerFlow table also
scores highly over conventional
designs with its ability to move on
to different crops with only minor
adjustment.
Schumacher knife system
With the most efcient table you
need a top performing knife.
PowerFlow tables are tted with
the Schumacher system, offering
high performance with rugged
durability. The ‘under and over’
cutting process gives quality
cutting in all conditions.
Oilseed rape auger
An optional rape auger can be
tted which increases performance
in tall crops. The hydraulically
driven auger is mounted above the
standard auger. It allows forward
speed to be increased markedly,
making oilseed rape harvest
extremely quick compared to
normal headers.
Folding dividers can be mounted
for quick turnarounds and safety.
Easily tted crop lifters can be
installed from their own storage
position on the table when
required.
07
01 PowerFlow table’s
even consistent feed.
02 One-piece
quick coupler.
03 PowerFlow table and
positive feed belt.
04 Schumacher knife. 05 Oilseed rape auger.
08
3.55 m
Threshing
Separation
Discharge
01 02 03
Massive threshing
capacity
01 Intake - feeder. 02 Threshing and
separating - rotor
cage and concaves.
03 Direct discharge.
09
Higher throughput
At the core of the MF FORTIA
range of combines is the huge,
heavy-duty Advanced Technology
Rotor (ATR) which, at 700mm
diameter on the MF 9695 and
9795 and 800mm diameter on the
MF 9895, combined with an overall
length of 3.55m on all models,
provides levels of crop throughput
that, until now, cereal producers
could only dream about.
Hydrostatically driven, the rotor
enables a signicant boost in
operational efciency to be
achieved through its ability to
harvest at a constant rotor speed,
which means any output and top
grain quality are maintained.
The constant speed rotor control
system maintains the selected
rotor speed even though the crop
yield may vary or engine speed
change. An overload alarm senses
maximum rotor capacity and
provides a warning to the operator
to reduce rotor blockages. The
rotor can be reversed remotely
from the cab to remove any
blockage that may occur.
The smooth, exible three-speed
rotor drive gearbox provides
selection of the optimum speed
range to match the rotor speed
and drive torque to the crop
harvest conditions. Capacity is
maximised and fuel consumption
minimised. The MF 9695 and
MF 9795 are equipped with a twospeed rotor drive gearbox.
Unbeatable Threshing
Performance
Meticulous attention to detail
in the design and build of the
four key sections of the rotor
– intake, threshing, separation
and discharge – has ensured a
seamless passage of the crop
through the combine.
The MF FORTIA Series’ heavy-duty rotor ensures a signicant
boost to crop throughput, previously unheard of.
Intake
Great care has been taken to
ensure that as little as possible of
the throughput is damaged in any
way, as the crop is fed into the
rotor head through the full-width
front feeder. The helical vanes
distribute the crop evenly as it
moves through into the threshing
area.
Just below the front feeder,
stones and other foreign objects
are deected into the stone trap,
which can be emptied easily by
pulling a lever on the combine’s
right-hand side.
Threshing and Separating
Adjustable from the cab, the
concave is equipped with a unique
sectional design and support
linkage that adjusts from both
sides of the concave to provide
uniform clearance around the
entire 160 degrees of wrap. The
threshing elements are coated with
tungsten carbide and the rasp bars
chrome hardened to extend their
efcient working life.
Discharge
The front to rear design of the
rotor means there is no need for
an additional beater for effective
discharge – resulting in greater
fuel savings. The straw can either
be laid straight into a swath or
diverted through the min-till
chopper.
Loading...