MASSEY FERGUSON MF1700, 1726E, 1734E, 1739E User Manual

Page 1
www.mabiebros.com
Near Syracuse NY
315-687-7891
Visit for a test drive!
MF1700 Series Compact Tractors
Pocket Guide
This pocket guide is formatted for optimal viewing on your tablet and/or mobile device.
Updated: 03/2014
Page 2
www.mabiebros.com
3
1700E Series
Page 3
www.mabiebros.com
Model 1726E 1734E 1739E
Model Overview
24 (17.9) @
34 (25.3) @
38.5 (28.7) @
Engine HP (kW)
2600 RPM
PTO HP (kW)
Engine Type Shibaura 1.5L 3-cylinder Diesel, Tier 4
Gear: 20.4 (15.2)
HST: 19.2 (14.3)
2600 RPM
Gear: 29.0 (21.6)
HST: 27.2 (20.3)
2800 RPM
Gear: 32.8 (24.5)
HST: 30.9 (23.0)
Transmission 9x3 Constant Mesh / 3-range Hydrostatic (HST)
7.2 gpm (27.3
Hydraulics 6.7 gpm (25.5 Lpm)
Configuration 4wd only; Open Platform with ROPS
4
1700E Series
Lpm)
Page 4
www.mabiebros.com
Common Shibaura Engine in All Models
Model N843T-F 3-cylinder engine
Manufactured by Shibaura (Japan)
1.5 liter (91.5 cu in) displacement
Turbocharged
Indirect injection, individual unit injectors
Electronic engine management
Structural block. Side support rails
included when loader is installed
Hand throttle on all models, foot throttle on gears models
EPA Tier 4 Final emissions compliant
Engine
6
1700E Series
Page 5
www.mabiebros.com
Engine
EPA Tier 4i Emissions Compliant
Exhaust Gas Recirculation (EGR)
Diesel Oxidation Catalyst (DOC)
Diesel Particulate Filter (DPF)
No DOC/DPF in 1726E models
DPF Cleaning/Regeneration
Fully automated
Requires no operator input
No change in tractor operation
(under normal regeneration process)
Regeneration interval depends on
7
machine use.
1700E Series
Page 6
www.mabiebros.com
Transmission
Gear: 9x3 Constant Mesh
3 ranges, non-synchronized, left side
in-line hand lever
3 gears + Reverse, non-synchronized, lever centered under steering wheel
Dry disc main clutch
Foot clutch pedal left side floor
HST: 3-Range Hydrostatic
Left side in-line range lever
Heel-toe rocker pedal, right side
Dry disc main clutch
Foot clutch pedal right side floor
8
1700E Series
Page 7
www.mabiebros.com
Rear Axle
Heavy Duty Cast Steel Rear Axle
Bull-gear reduction with flange
Internal wet disc brakes
Mechanically engaged
Individual LH and RH brake pedals
Parking brake via brake pedal lock
Mechanical rear differential lock
Right heel pedal engagement
Sight glass oil level check
9
1700E Series
Page 8
www.mabiebros.com
Mechanical 4wd Front Axle
Solid cast steel construction
Bevel gear design
High ground clearance
High steering angle (52 degrees)
Hydrostatic power steering
Double-end hydraulic cylinder
Center driveline, open differential
6-8 degrees of even axle oscillation
Mechanical engagement via hand lever
4-wheel braking when engaged
Front Axle
10
1700E Series
Page 9
www.mabiebros.com
Rear Power Take Off (PTO)
540 RPM PTO standard
6-spline 1 3/8” 540 shaft
Two types of PTO’s available
Transmission driven
Independent
Mechanically engaged via levers
Transmission Driven Independent
540 PTO Speed 540 PTO Speed
2455 Engine RPM 2455 Engine RPM
Power Take Off
11
1700E Series
Page 10
www.mabiebros.com
Transmission Driven PTO
Dependent on main transmission
clutch
Press foot clutch – PTO and
Release foot clutch – PTO and
Hand lever selects PTO gear
Main clutch must be pressed
Overrunning clutch in PTO allows
implement to “coast” to a stop
Power Take Off
transmission disengages
transmission engages
12
1700E Series
Page 11
www.mabiebros.com
Power Take Off
Independent PTO
PTO driveline independent of main
transmission clutch
No foot clutch required for operation
Hand lever selects PTO gear
Lever located on right side
floor area
Second hand lever starts PTO
Mechanical clutch
Simple on/off operation
PTO Gear Engage Lever
PTO Start/Stop
Lever
13
1700E Series
Page 12
www.mabiebros.com
Hydraulics
Open Center Hydraulic System
Two gear-type pumps
Steering and implement
2130 PSI operating pressure
Up to 2 rear remote valves available
Field installed only
Available loader valves and joystick
Attach to loader mounts
Field installed with loader
Model Steering Flow Implement Flow Total Flow
1726E / 1734E 3.8 gpm 6.2 gpm 10.0 gpm
1739E 4.1 gpm 6.6 gpm 10.7 gpm
14
1700E Series
Page 13
Standard
www.mabiebros.com
Rear 3-Point Hitch
ASAE Category I hitch
Mechanical control, right hand
Position control only
Screw-adjust stabilizers
Fixed ball ends
Single lift arm height adjustment
Adjustable top link
Length and position
Lift Capacity
3-Point Hitch
@ Ball Ends @ 24”
15
2,205 lb (1000 kg)
1,598 lb (725 kg)
1700E Series
Page 14
www.mabiebros.com
Standard Platform Features
Left side step/handle for entry
Semi-flat platform, perforated
steel foot deck for durability
Steel fenders
Folding ROPS with marker lights
Fixed Steering
Suspended vinyl seat with
retractable seatbelt
Analog and digital front dash
Pedestal foot pedals
Intuitive layout of controls
16
Operator’s Area
1700E Series
Page 15
www.mabiebros.com
Operator’s Area
17
1700E Series
Page 16
www.mabiebros.com
Operator’s Area
Fuel Fill
Lights and Turn Signals
Fixed Steering Wheel
Steel Foot Deck
Range Lever
Grab Handle
Suspended Seat
Steel Fenders
Cup Holder
18
Analog/Digital Dash
Hand Throttle
Pedestal Foot Pedals
PTO Gear Select Lever
Diff. Lock Pedal
Rear Remote Levers
3-pt Control
iPTO Start Lever
Toolbox
1700E Series
Page 17
www.mabiebros.com
Service Items
10 gallon fuel tank under
platform – ground level fill
Single piece raising steel hood
with simple pull latch
Easy access to:
Engine oil check
Engine air filter
Battery
Radiator cleaning
Transmission check
Rear axle sight glass
Service
19
1700E Series
Page 18
www.mabiebros.com
Loader Features
L100 Front loader
Simple straight boom design
Quick attach main frame
Built-in parking stands
Joystick mounted to loader
sub-frames
Quick-connect valves
Sub-frame rails for added
strength
Can be factory installed
Loaders
20
1700E Series
Page 19
www.mabiebros.com
Loader Tools
Direct connection to bucket
Bucket level indicator
Grill guard
Pin type or skid steer quick
attachment for tools
Tools available:
Buckets
Pallet forks
Accessories
Rear weight frame
Rear ballast box
Loaders
21
1700E Series
Page 20
www.mabiebros.com
Backhoes
CB10 Backhoe
CB10 backhoe fits all 1700E Series
tractors
Sub-frame mounts to rear axle
Durability and long life
Field installed only
Quick attach design for removal
Separate, dedicated seat
Boom float control standard
Requires 1 rear hydraulic valve
Backhoe Tractor Dig Depth Dig Force Max. Reach
CB10 1700E Series 90 in 3,250 lbs 112 in
22
Above values measured at pivot pins
1700E Series
Page 21
www.mabiebros.com
5-year Factory Warranty
2 years / 2,000 hour full coverage
5 years / 2,000 hour powertrain
coverage
Industry-leading coverage
Administered by AGCO
Not aftermarket
Same claim process as all
other AGCO products
Warranty
23
1700E Series
Page 22
Rated
Rated Engine
Rated PTO HP (kW)
Rated Torque
Maximum
Torque Rise
www.mabiebros.com
Performance
Engine HP (kW) 24.0 (17.9) 34.0 (25.4) 38.5 (28.7)
Speed 2600 RPM 2800 RPM
TBA 68.8 lb ft @ 2600 RPM 72.2 lb ft @ 2800 RPM
Torque TBA 82.6 lb ft @ 1600 RPM 82.6 lb ft @ 1600 RPM
TBA 20.1% 14.4%
Specifications
1726E 1734E 1739E
20.4 (15.2) gear,
19.2 (14.3) HST
29.0 (21.6) gear,
27.2 (20.3) HST
32.7 (24.4) gear,
30.8 (23.0) HST
24
1700E Series
Page 23
Make
Model
Cylinders
Bore
Displacement
Compression
Intake
Aspiration
Injection
Valves
Engine Control Low / High Idle
EPA Compliance
Emissions Components
Diesel
Ceramic wall flow type
Regeneration Modes
Regeneration Control
Starting Aid
Alternator
Starter
Battery
Bio Diesel Content
www.mabiebros.com
Engine
Specifications
IHI Shibaura Machinery
N843T-F
3
x Stroke 3.31” x 3.54”
1.5 L (91.3 in3)
22.5:1
Single stage dry
Turbocharged
Indirect, low pressure
2 / cylinder
25
Electronic
975 RPM / 2835 RPM
Tier 4
Internal EGR, DPF
Particulate Filter
Active / Passive
Automatic
Glow plug
65 amp
12 V, 1.7 kW
600 CCA
B5 maximum
1726E model achieves Tier 4 emissions levels without the need for a DOC or DPF.
1700E Series
Page 24
Type
Gears
Ranges
Clutch Type
Disc Diameter
Gear Shift
Range Lever
Forward Speeds
Reverse Speeds Foot Pedals
Type
Speeds
Ranges
Clutch Type
Disc Diameter
Range Lever
HST Controls
Cruise
Foot Pedals
www.mabiebros.com
Specifications
Transmission
Mechanical Transmission
Constant Mesh
3, non-synchronized
Dry single disc
Lever Center of platform
Left side, in-line
26
Clutch, brakes, throttle
8.6 in (225 mm)
9
3
3 forward, 1 reverse; all non-synchronized
Hydrostatic Transmission (HST)
Variable swash plate
Infinite
3
Dry single disc
8.6 in (225 mm)
Left side, in-line
Control None
Clutch, brakes
Mechanical;
heel / toe rocker pedal
1700E Series
Page 25
Rear
Reduction
Differential Lock
Brakes
Brakes Actuation
Front Axle Type
4wd Reduction
4wd Engagement
4wd Lead Ratio
Steering
Steering Angle Parking Brake
System Type
Open center, gear pump
System
Implement Flow gpm
1726E/1734E = 6.2 gpm
Steering Flow
1726E/1734E = 3.8 gpm
Rear Valves
3
Ball Ends
Adjustment
Control
Lift Capacity @ 24”
Lift Capacity @ Balls
www.mabiebros.com
Specifications
Axles Hydraulic System
Axle Type Cast Steel Flange
Bull gear
Mechanical, foot pedal
Internal wet disc
Mechanical
4wd only
Bevel gear
Hydrostatic
Mechanical lever
1.5167
52 degrees
Uses foot brakes
-point Hitch Type ASAE Category 1
Pressure 2,132 psi (147 bar)
Up to 2
Fixed
Single lift arm
Position only
1598 lbs
2205 lbs
1739E = 6.6 gpm
1739E = 4.1 gpm
27
1700E Series
Page 26
www.mabiebros.com
Specifications
Speed Chart (MPH) with Mechanical Transmission
1726E/1734E Mechanical Transmission 1739E Mechanical Transmission
Shift Position
Range Gear Forward Speed (MPH) @ Rated Engine RPM
Low
Medium
Hi
Max. Speed (Max. Throttle) 13.26 11.63 11.94 14.29 12.53 12.86
Range Gear Reverse Speeds (MPH) @ Rated Engine RPM
Low Reverse 1.16 1.01 1.04 1.25 1.09 1.12
Medium Reverse 3.01 2.63 2.70 3.24 2.84 2.91
High Reverse 7.40 6.49 6.66 7.97 6.98 7.17
28
Tires R1 Ag. R3 Turf R4 Ind. R1 Ag. R3 Turf R4 Ind. Front 7-16 27x8.50-15 27x8.50-15 7-16 27x8.50-15 27x8.50-15
Rear 11.2-24 38x14.00-20 15x19.5 11.2-24 38x14.00-20 15x19.5
1 2 3 1 2 3 1
2
3
1.00 0.88 0.90 1.07 0.94 0.97
1.39 1.22 1.25 1.50 1.31 1.35
1.92 1.68 1.73 2.07 1.81 1.86
2.60 2.28 2.34 2.80 2.45 2.52
3.61 3.16 3.25 3.88 3.41 3.50
4.99 4.37 4.49 5.37 4.71 4.83
6.40 5.61 5.76 6.89 6.05 6.20
8.88 7.79 7.99 9.56 8.38 8.61
12.28 10.77 11.05 13.22 11.59 11.90
1700E Series
Page 27
www.mabiebros.com
Specifications
Speed Chart (MPH) with Hydrostatic Transmission
1726E/1734E HST Transmission 1739E HST Transmission
Shift Position
Range Forward Speed (MPH) @ Rated Engine RPM
Low
Medium
Hi
Max. Speed
Range Reverse Speeds (MPH) @ Rated Engine RPM
Low
Medium
High
29
R1 Ag. R3 Turf R4 Ind. R1 Ag. R3 Turf R4 Ind.
7-16 27x8.50-15 27x8.50-15 7-16 27x8.50-15 27x8.50-15
11.2-24 38x14.00-20 15x19.5 11.2-24 38x14.00-20 15x19.5
3.72 3.26 3.34 4.00 3.51 3.60
6.05 5.31 5.45 6.52 5.72 5.87
13.62 11.94 12.26 14.66 12.86 13.20
14.72 12.91 13.25 15.84 13.89 14.26
2.89 2.54 2.60 3.11 2.73 2.80
4.71 4.13 4.24 5.07 4.45 4.56
10.59 9.29 9.53 11.41 10.00 10.27
1700E Series
Page 28
PTO Speed
PTO Shaft Design
Engine @ 540 PTO Speed
PTO Gear Selection
PTO Speed Indicator
PTO Engagement
Overrunning
Compatible Models
PTO Engagement
Compatible Models
Engine Crankcase Oil
Cooling System
Coolant Type
Fuel Tank
Transmission
4wd Axle
Grease Type
Max. Operating Angle
Turning Radius
Electrical Socket
www.mabiebros.com
Specifications
Rear PTO Fluid Capacities
540 RPM only
1 3/8 inch, 6-spline
2455 engine RPM
Mechanical, hand lever
None
Transmission Driven PTO
Foot clutch pedal
Clutch Standard
Independent Driven PTO
30
Foot clutch pedal
1739E gear
1726E / 1734E /
1739E HST
Miscellaneous
5.3 qts (5 L)
50/50 Mix
10 gal (38 L)
10 gal (38 L)
5.9 qts (5.6 L)
Lithium Base #2
9.2 ft (2.8 m) w/ R1
4.9 qts (4.6 L)
20 degrees
None
1700E Series
Page 29
www.mabiebros.com
Specifications
Axle Weight Capacities and Ground Clearance
1726E / 1734E 1739E
Front Axle Capacity 2,205 lb (1000 kg) 2,205 lb (1000 kg)
Rear Axle Capacity 2,205 lb (1000 kg) 2,205 lb (1000 kg)
Total Machine Capacity 4,409 lb (2000 kg) 4,409 lb (2000 kg)
Tire Sizes (front/rear)
4wd R1 Ag Tires
4wd R3 Turf Tires
4wd R4 Industrial Tires
7-16 6 ply / 11.2x24 4 ply 7-16 6 ply / 11.2x24 4 ply
27x8.50-15 4 ply / 38x14.00-20 4 ply 27x8.50-15 4 ply / 38x14.00-20 4 ply
27x8.50-15 6 ply / 15x19.5 6 ply 27x8.50-15 6 ply / 15x19.5 6 ply
Tread Spacing
Tire Type R1 Ag Tires R3 Turf Tires R4 Industrial Tires
Tread Spacing (front / rear)
42.7 in / 45.1 in 40.0 in / 43.5 in 42.7 in / 45.1 in
31
1700E Series
Page 30
www.mabiebros.com
Specifications
Tractor Dimensions
1726E 1734E 1739E
Overall Length Min. Width w/ R1 Tires Min. Width w/ R3 Tires
Width at Rear Fenders
Wheelbase Height Over ROPS w/ R4 Height Over ROPS Folded
w/ R4 Height to Foot Deck w/ R4
Height to Steering Wheel Ground Clearance w/ R4 Weight 4wd ROPS Gear
Weight 4wd ROPS HST 2657 lb (1205 kg) 2789 lb (1265 kg) 2767 lb (1255 kg)
32
116.5 in (2960 mm) 116.5 in (2960 mm) 116.5 in (2960 mm)
52.4 in (1330 mm) 52.4 in (1330 mm) 52.4 in (1330 mm)
58.1 in (1475 mm) 58.1 in (1475 mm) 58.1 in (1475 mm)
49.5 in (1257 mm)
65.9 in (1675 mm) 65.9 in (1675 mm) 65.9 in (1675 mm)
94.9 in (2410 mm) 94.9 in (2410 mm) 94.9 in (2410 mm)
71.0 in (1803 mm) 71.0 (1803 mm) 71.0 (1803 mm)
25.0 in (635 mm)
57.0 in (1448 mm)
9.0 in (229)
2600 lb (1180 kg) 2734 lb (1240 kg) 2756 lb (1250 kg)
1700E Series
Page 31
Specifications
Loader Capacities
Loader Model L100
Lift Height @ Pivot 97 in
Lift Capacity @ Pivot 1202 lbs
Breakout Force @ Bucket Edge 1313 lbs
Rated Hydraulic Pressure 2132 PSI
Maximum Dump Angle 34 degrees
Maximum Bucket Rollback Angle 13 degrees
Tractor Compatibility 1726E / 1734E / 1739E
Tool Attachment Method Pin-type or universal skid steer quick attach
3rd Function Capability None
www.mabiebros.com
Near Syracuse NY
315-687-7891
33
Visit for a test drive!
1700E Series
Loading...