MF
Centre-line small rectangular baler for efficient, cost-effective baling
1839
VISION INNOVATION LEADERSHIP QUALITY RELIABILITY SUPPORT PRIDE COMMITMENT
The MF 1839:
A r eal investment
The MF 1839 ‘centre-line’ baler goes from strength-to-strength
thanks to its popular design and well-established reputation as the
perfect small, square baler. Whether you bale a few hectares a year
for your own livestock, or produce thousands of bales annually in
a commercial operation, the MF 1839 will fit your requirements and
budget perfectly.
MF 1839
Bale size Height: 356 mm x Width 457 mm / 14¨ x 18¨
Bale length 305 mm to 1321 mm
Crops Straw, hay, low moisture haylage
Power requirement Recommended 60 PTO hp
Working Pickup width 1.9 m
Density control Manual springs or hydraulic
Options Hydraulic pickup lift
Automatic hydraulic bale tension
Trailer hitch
Designed and built in our factory
in Hesston, Kansas, the MF 1839
baler has a steadfast reputation
as a sturdy and reliable partner
for ‘fuss-free’ baling. For years
the MF 1839 has proved itself to
be an excellent investment, for
small or large farms, contractors
and equine businesses alike. And
thanks to its simple operation and
consistent design, this simple
‘centre-line’ baler will quickly
become a worthwhile investment
for your business.
The MF 1839 baler is robust
and durable with a low power
requirement, ensuring years of
reliable service.
This ‘centre-line’ small rectangular
baler has a working pickup width
of 1.9 m. The wide, heavy-duty
pickup is ideal for high usage
or contracting. It is guaranteed
to produce consistent, densely
packed bales of hay or straw that
are the right size for easy handling
or feeding and the right density for
efficient storage and transport.
Make the right business choice
with an MF 1839 baler.
Features include:
01 Heavy-duty driveline and
large flywheel reduces power
requirement
02 Wide, low profile pickup
reduces crop loss and improves
crop feed
03 A single hand crank allows the
operator to quickly raise and lower
the pick-up
04 Compact, low profile design
allows the operator a full view of
the baler
A - High plunger speed of 100
strokes per minute ensures high
output and high density bales.
B - A set of adjustable hay resistor
doors in the sides of the chamber
complement the pressure from the
top and bottom rails for controlled
bale density.
C - Hydraulic bale density control
(Optional).
D - Heavy duty knotters designed
for years of reliability, works with
plastic and sisal twine.
E - Twine boxes are located either
side of the baler for easy twine
replenishment.
02
01 02
03
E
B
D
E
A
B
C
04
03
Fuss-free baling with
the MF 1839 baler
The MF 1839 baler is based, uniquely, on a ‘centre-line’ design in
which the crop flows through the baler in a straight line. No-fuss,
no time wasted, just perfectly formed bales everytime.
Easy on the road, easy in
the field
You’ll notice the first advantage
before reaching the field. Even
though the MF 1839 features a
wide pickup, transport width is
exceptionally narrow because
of the in-line design allowing
easy access to narrow lanes and
awkward gateways. And when
you get to the field, there is no
need to manhandle the baler from
a ‘transport’ position to a ‘work’
position – you just lower the
pickup and start baling.
Wide, centre-mounted pickup
The 1.9 metre wide pickup
features a small diameter, ‘lowprofile’ design with closely spaced
tines ensuring that windrows are
picked up cleanly with minimal
disturbance and leaf loss. Gauge
wheels, fitted as standard, further
help the pickup to follow uneven
ground contours, avoiding pickup
tine damage. The MF 1839 has
a four tine bar pickup for higher
throughput.
As soon as the crop enters the
pickup, centring augers move
the material into the centre of the
baler. This ensures equal material
distribution, improves crop feed
and prevents the bale from
becoming ‘banana-shaped’.
Less work for the plunger
The crop is delivered into the precompression chamber where the
flake is pre-formed before entering
the main chamber. This ensures a
well-shaped bale is formed
improving bale density and
reducing stress on components
giving improved baler durability.
Short stroke, high speed plunger
The pre-formed slice concept
enables the baler to operate with a
shorter plunger stroke, significantly
reducing plunger bearing wear
whilst generating a greater number
of bales.
Low-profile, wide pickup
High crop-flow rate
Even material distribution
Pre-formed flakes
High density bales
High capacity baling
Centre-line pull, ideal for
the attachment of rear
accumulators
Simplicity of use
Low maintenance
Built-in safety protection
(Slip and overrun clutches
and needle protection)
01 ‘Centre-line’ design eliminates
side drafts and crop remains in a
straight line from pickup to final
bale.
02 Crop flow
A Crop is moved from the pickup
into a pre-forming chamber.
B The packer then pushes the
pre-formed flake into the bale
chamber.
03 MF 1839, 1.9 m ‘low profile’
pickup.
04 Perfectly formed bales.
04
Loading...