Page 1

www.mabiebros.com
Near Syracuse NY
315-687-7891
Visit for a test drive!
MF1700 Series Compact Tractors
Pocket Guide
This pocket guide is formatted for optimal viewing on your tablet and/or mobile device.
Updated: 03/2014
Page 2

www.mabiebros.com
1700E Series
3
1700E Series
Page 3

www.mabiebros.com
Model 1726E 1734E 1739E
Model Overview
24 (17.9) @
34 (25.3) @
38.5 (28.7) @
Engine HP (kW)
2600 RPM
PTO HP (kW)
Engine Type Shibaura 1.5L 3-cylinder Diesel, Tier 4
Gear: 20.4 (15.2)
HST: 19.2 (14.3)
2600 RPM
Gear: 29.0 (21.6)
HST: 27.2 (20.3)
2800 RPM
Gear: 32.8 (24.5)
HST: 30.9 (23.0)
Transmission 9x3 Constant Mesh / 3-range Hydrostatic (HST)
7.2 gpm (27.3
Hydraulics 6.7 gpm (25.5 Lpm)
Configuration 4wd only; Open Platform with ROPS
4
1700E Series
Lpm)
Page 4

www.mabiebros.com
Common Shibaura Engine in All Models
• Model N843T-F 3-cylinder engine
• Manufactured by Shibaura (Japan)
• 1.5 liter (91.5 cu in) displacement
• Turbocharged
• Indirect injection, individual unit injectors
• Electronic engine management
• Structural block. Side support rails
included when loader is installed
• Hand throttle on all models, foot throttle
on gears models
• EPA Tier 4 Final emissions compliant
Engine
6
1700E Series
Page 5

www.mabiebros.com
Engine
EPA Tier 4i Emissions Compliant
• Exhaust Gas Recirculation (EGR)
• Diesel Oxidation Catalyst (DOC)
• Diesel Particulate Filter (DPF)
• No DOC/DPF in 1726E models
• DPF Cleaning/Regeneration
• Fully automated
• Requires no operator input
• No change in tractor operation
(under normal regeneration process)
• Regeneration interval depends on
7
machine use.
1700E Series
Page 6

www.mabiebros.com
Transmission
Gear: 9x3 Constant Mesh
• 3 ranges, non-synchronized, left side
in-line hand lever
• 3 gears + Reverse, non-synchronized,
lever centered under steering wheel
• Dry disc main clutch
• Foot clutch pedal left side floor
HST: 3-Range Hydrostatic
• Left side in-line range lever
• Heel-toe rocker pedal, right side
• Dry disc main clutch
• Foot clutch pedal right side floor
8
1700E Series
Page 7

www.mabiebros.com
Rear Axle
Heavy Duty Cast Steel Rear Axle
• Bull-gear reduction with flange
• Internal wet disc brakes
• Mechanically engaged
• Individual LH and RH brake pedals
• Parking brake via brake pedal lock
• Mechanical rear differential lock
• Right heel pedal engagement
• Sight glass oil level check
9
1700E Series
Page 8

www.mabiebros.com
Mechanical 4wd Front Axle
• Solid cast steel construction
• Bevel gear design
• High ground clearance
• High steering angle (52 degrees)
• Hydrostatic power steering
• Double-end hydraulic cylinder
• Center driveline, open differential
• 6-8 degrees of even axle oscillation
• Mechanical engagement via hand lever
• 4-wheel braking when engaged
Front Axle
10
1700E Series
Page 9

www.mabiebros.com
Rear Power Take Off (PTO)
• 540 RPM PTO standard
• 6-spline 1 3/8” 540 shaft
• Two types of PTO’s available
• Transmission driven
• Independent
• Mechanically engaged via levers
Transmission Driven Independent
540 PTO Speed 540 PTO Speed
2455 Engine RPM 2455 Engine RPM
Power Take Off
11
1700E Series
Page 10

www.mabiebros.com
Transmission Driven PTO
• Dependent on main transmission
clutch
• Press foot clutch – PTO and
• Release foot clutch – PTO and
• Hand lever selects PTO gear
• Main clutch must be pressed
• Overrunning clutch in PTO allows
implement to “coast” to a stop
Power Take Off
transmission disengages
transmission engages
12
1700E Series
Page 11

www.mabiebros.com
Power Take Off
Independent PTO
• PTO driveline independent of main
transmission clutch
• No foot clutch required for
operation
• Hand lever selects PTO gear
• Lever located on right side
floor area
• Second hand lever starts PTO
• Mechanical clutch
• Simple on/off operation
PTO Gear Engage Lever
PTO Start/Stop
Lever
13
1700E Series
Page 12

www.mabiebros.com
Hydraulics
Open Center Hydraulic System
• Two gear-type pumps
• Steering and implement
• 2130 PSI operating pressure
• Up to 2 rear remote valves available
• Field installed only
• Available loader valves and joystick
• Attach to loader mounts
• Field installed with loader
Model Steering Flow Implement Flow Total Flow
1726E / 1734E 3.8 gpm 6.2 gpm 10.0 gpm
1739E 4.1 gpm 6.6 gpm 10.7 gpm
14
1700E Series
Page 13

www.mabiebros.com
Rear 3-Point Hitch
• ASAE Category I hitch
• Mechanical control, right hand
• Position control only
• Screw-adjust stabilizers
• Fixed ball ends
• Single lift arm height adjustment
• Adjustable top link
• Length and position
Lift Capacity
3-Point Hitch
@ Ball Ends @ 24”
15
2,205 lb (1000 kg)
1,598 lb (725 kg)
1700E Series
Page 14

www.mabiebros.com
Standard Platform Features
• Left side step/handle for entry
• Semi-flat platform, perforated
steel foot deck for durability
• Steel fenders
• Folding ROPS with marker lights
• Fixed Steering
• Suspended vinyl seat with
retractable seatbelt
• Analog and digital front dash
• Pedestal foot pedals
• Intuitive layout of controls
16
Operator’s Area
1700E Series
Page 15

www.mabiebros.com
Operator’s Area
17
1700E Series
Page 16

www.mabiebros.com
Operator’s Area
Fuel Fill
Lights and Turn Signals
Fixed Steering Wheel
Steel Foot Deck
Range Lever
Grab Handle
Suspended Seat
Steel Fenders
Cup Holder
18
Analog/Digital Dash
Hand Throttle
Pedestal Foot Pedals
PTO Gear Select Lever
Diff. Lock Pedal
Rear Remote Levers
3-pt Control
iPTO Start Lever
Toolbox
1700E Series
Page 17

www.mabiebros.com
Service Items
• 10 gallon fuel tank under
platform – ground level fill
• Single piece raising steel hood
with simple pull latch
• Easy access to:
• Engine oil check
• Engine air filter
• Battery
• Radiator cleaning
• Transmission check
• Rear axle sight glass
Service
19
1700E Series
Page 18

www.mabiebros.com
Loader Features
• L100 Front loader
• Simple straight boom design
• Quick attach main frame
• Built-in parking stands
• Joystick mounted to loader
sub-frames
• Quick-connect valves
• Sub-frame rails for added
strength
• Can be factory installed
Loaders
20
1700E Series
Page 19

www.mabiebros.com
Loader Tools
• Direct connection to bucket
• Bucket level indicator
• Grill guard
• Pin type or skid steer quick
attachment for tools
• Tools available:
• Buckets
• Pallet forks
• Accessories
• Rear weight frame
• Rear ballast box
Loaders
21
1700E Series
Page 20

www.mabiebros.com
Backhoes
CB10 Backhoe
• CB10 backhoe fits all 1700E Series
tractors
• Sub-frame mounts to rear axle
– Durability and long life
• Field installed only
• Quick attach design for removal
• Separate, dedicated seat
• Boom float control standard
• Requires 1 rear hydraulic valve
Backhoe Tractor Dig Depth Dig Force Max. Reach
CB10 1700E Series 90 in 3,250 lbs 112 in
22
Above values measured at pivot pins
1700E Series
Page 21

www.mabiebros.com
5-year Factory Warranty
• 2 years / 2,000 hour full coverage
• 5 years / 2,000 hour powertrain
coverage
• Industry-leading coverage
• Administered by AGCO
• Not aftermarket
• Same claim process as all
other AGCO products
Warranty
23
1700E Series
Page 22

www.mabiebros.com
Performance
Engine HP (kW) 24.0 (17.9) 34.0 (25.4) 38.5 (28.7)
Speed 2600 RPM 2800 RPM
TBA 68.8 lb ft @ 2600 RPM 72.2 lb ft @ 2800 RPM
Torque TBA 82.6 lb ft @ 1600 RPM 82.6 lb ft @ 1600 RPM
TBA 20.1% 14.4%
Specifications
1726E 1734E 1739E
20.4 (15.2) gear,
19.2 (14.3) HST
29.0 (21.6) gear,
27.2 (20.3) HST
32.7 (24.4) gear,
30.8 (23.0) HST
24
1700E Series
Page 23

Engine Control
Low / High Idle
www.mabiebros.com
Engine
Specifications
IHI Shibaura Machinery
N843T-F
3
x Stroke 3.31” x 3.54”
1.5 L (91.3 in3)
22.5:1
Single stage dry
Turbocharged
Indirect, low pressure
2 / cylinder
25
Electronic
975 RPM / 2835 RPM
Tier 4
Internal EGR, DPF
Particulate Filter
Active / Passive
Automatic
Glow plug
65 amp
12 V, 1.7 kW
600 CCA
B5 maximum
1726E model achieves Tier 4 emissions levels
without the need for a DOC or DPF.
1700E Series
Page 24

Reverse Speeds
Foot Pedals
www.mabiebros.com
Specifications
Transmission
Mechanical Transmission
Constant Mesh
3, non-synchronized
Dry single disc
Lever Center of platform
Left side, in-line
26
Clutch, brakes, throttle
8.6 in (225 mm)
9
3
3 forward, 1 reverse;
all non-synchronized
Hydrostatic Transmission (HST)
Variable swash plate
Infinite
3
Dry single disc
8.6 in (225 mm)
Left side, in-line
Control None
Clutch, brakes
Mechanical;
heel / toe rocker pedal
1700E Series
Page 25

Steering Angle
Parking Brake
www.mabiebros.com
Specifications
Axles Hydraulic System
Axle Type Cast Steel Flange
Bull gear
Mechanical, foot pedal
Internal wet disc
Mechanical
4wd only
Bevel gear
Hydrostatic
Mechanical lever
1.5167
52 degrees
Uses foot brakes
-point Hitch Type ASAE Category 1
Pressure 2,132 psi (147 bar)
Up to 2
Fixed
Single lift arm
Position only
1598 lbs
2205 lbs
1739E = 6.6 gpm
1739E = 4.1 gpm
27
1700E Series
Page 26

www.mabiebros.com
Specifications
Speed Chart (MPH) with Mechanical Transmission
1726E/1734E Mechanical Transmission 1739E Mechanical Transmission
Shift Position
Range Gear Forward Speed (MPH) @ Rated Engine RPM
Low
Medium
Hi
Max. Speed (Max. Throttle) 13.26 11.63 11.94 14.29 12.53 12.86
Range Gear Reverse Speeds (MPH) @ Rated Engine RPM
Low Reverse 1.16 1.01 1.04 1.25 1.09 1.12
Medium Reverse 3.01 2.63 2.70 3.24 2.84 2.91
High Reverse 7.40 6.49 6.66 7.97 6.98 7.17
28
Tires R1 Ag. R3 Turf R4 Ind. R1 Ag. R3 Turf R4 Ind.
Front 7-16 27x8.50-15 27x8.50-15 7-16 27x8.50-15 27x8.50-15
Rear 11.2-24 38x14.00-20 15x19.5 11.2-24 38x14.00-20 15x19.5
1
2
3
1
2
3
1
2
3
1.00 0.88 0.90 1.07 0.94 0.97
1.39 1.22 1.25 1.50 1.31 1.35
1.92 1.68 1.73 2.07 1.81 1.86
2.60 2.28 2.34 2.80 2.45 2.52
3.61 3.16 3.25 3.88 3.41 3.50
4.99 4.37 4.49 5.37 4.71 4.83
6.40 5.61 5.76 6.89 6.05 6.20
8.88 7.79 7.99 9.56 8.38 8.61
12.28 10.77 11.05 13.22 11.59 11.90
1700E Series
Page 27

www.mabiebros.com
Specifications
Speed Chart (MPH) with Hydrostatic Transmission
1726E/1734E HST Transmission 1739E HST Transmission
Shift Position
Range Forward Speed (MPH) @ Rated Engine RPM
Low
Medium
Hi
Max. Speed
Range Reverse Speeds (MPH) @ Rated Engine RPM
Low
Medium
High
29
R1 Ag. R3 Turf R4 Ind. R1 Ag. R3 Turf R4 Ind.
7-16 27x8.50-15 27x8.50-15 7-16 27x8.50-15 27x8.50-15
11.2-24 38x14.00-20 15x19.5 11.2-24 38x14.00-20 15x19.5
3.72 3.26 3.34 4.00 3.51 3.60
6.05 5.31 5.45 6.52 5.72 5.87
13.62 11.94 12.26 14.66 12.86 13.20
14.72 12.91 13.25 15.84 13.89 14.26
2.89 2.54 2.60 3.11 2.73 2.80
4.71 4.13 4.24 5.07 4.45 4.56
10.59 9.29 9.53 11.41 10.00 10.27
1700E Series
Page 28

www.mabiebros.com
Specifications
Rear PTO Fluid Capacities
540 RPM only
1 3/8 inch, 6-spline
2455 engine RPM
Mechanical, hand lever
None
Transmission Driven PTO
Foot clutch pedal
Clutch Standard
Independent Driven PTO
30
Foot clutch pedal
1739E gear
1726E / 1734E /
1739E HST
Miscellaneous
5.3 qts (5 L)
50/50 Mix
10 gal (38 L)
10 gal (38 L)
5.9 qts (5.6 L)
Lithium Base #2
9.2 ft (2.8 m) w/ R1
4.9 qts (4.6 L)
20 degrees
None
1700E Series
Page 29

www.mabiebros.com
Specifications
Axle Weight Capacities and Ground Clearance
1726E / 1734E 1739E
Front Axle Capacity 2,205 lb (1000 kg) 2,205 lb (1000 kg)
Rear Axle Capacity 2,205 lb (1000 kg) 2,205 lb (1000 kg)
Total Machine Capacity 4,409 lb (2000 kg) 4,409 lb (2000 kg)
Tire Sizes (front/rear)
4wd R1 Ag Tires
4wd R3 Turf Tires
4wd R4 Industrial Tires
7-16 6 ply / 11.2x24 4 ply 7-16 6 ply / 11.2x24 4 ply
27x8.50-15 4 ply / 38x14.00-20 4 ply 27x8.50-15 4 ply / 38x14.00-20 4 ply
27x8.50-15 6 ply / 15x19.5 6 ply 27x8.50-15 6 ply / 15x19.5 6 ply
Tread Spacing
Tire Type R1 Ag Tires R3 Turf Tires R4 Industrial Tires
Tread Spacing (front / rear)
42.7 in / 45.1 in 40.0 in / 43.5 in 42.7 in / 45.1 in
31
1700E Series
Page 30

www.mabiebros.com
Specifications
Tractor Dimensions
1726E 1734E 1739E
Overall Length
Min. Width w/ R1 Tires
Min. Width w/ R3 Tires
Width at Rear Fenders
Wheelbase
Height Over ROPS w/ R4
Height Over ROPS Folded
w/ R4
Height to Foot Deck w/ R4
Height to Steering Wheel
Ground Clearance w/ R4
Weight 4wd ROPS Gear
Weight 4wd ROPS HST 2657 lb (1205 kg) 2789 lb (1265 kg) 2767 lb (1255 kg)
32
116.5 in (2960 mm) 116.5 in (2960 mm) 116.5 in (2960 mm)
52.4 in (1330 mm) 52.4 in (1330 mm) 52.4 in (1330 mm)
58.1 in (1475 mm) 58.1 in (1475 mm) 58.1 in (1475 mm)
49.5 in (1257 mm)
65.9 in (1675 mm) 65.9 in (1675 mm) 65.9 in (1675 mm)
94.9 in (2410 mm) 94.9 in (2410 mm) 94.9 in (2410 mm)
71.0 in (1803 mm) 71.0 (1803 mm) 71.0 (1803 mm)
25.0 in (635 mm)
57.0 in (1448 mm)
9.0 in (229)
2600 lb (1180 kg) 2734 lb (1240 kg) 2756 lb (1250 kg)
1700E Series
Page 31

Specifications
Loader Capacities
Loader Model L100
Lift Height @ Pivot 97 in
Lift Capacity @ Pivot 1202 lbs
Breakout Force @ Bucket Edge 1313 lbs
Rated Hydraulic Pressure 2132 PSI
Maximum Dump Angle 34 degrees
Maximum Bucket Rollback Angle 13 degrees
Tractor Compatibility 1726E / 1734E / 1739E
Tool Attachment Method Pin-type or universal skid steer quick attach
3rd Function Capability None
www.mabiebros.com
Near Syracuse NY
315-687-7891
33
Visit for a test drive!
1700E Series