Marvel Industries 8SBARE User Manual

MARVEL BEVERAGE CENTER

life. luxury. marvel™.

Installation
Operation
and
Maintenance
Instructions

Beverage
Center
8SBARE

STARTING OUT

2

Remove Packaging

Your beverage center has been packed for
shipment with all parts that could be damaged by
movement securely fastened. Before using, be sure
all packing materials and tape have been removed.

Important

Keep your carton packaging until your beverage
center has been thoroughly inspected and found to
be in good condition. If there is damage, the
packaging will be needed as proof of damage in
transit.

Note to Customer

This merchandise was carefully packed and
thoroughly inspected before leaving our plant.
Responsibility for its safe delivery was assumed by
the carrier upon acceptance of the shipment. As
directed on the side of your packing carton, claims
for loss or damage sustained in transit must be
made on the carrier as follows:

Exterior Damage

Make thorough damage notation on your
delivery receipt and have driver acknowledge
by signature and date. Send a written request
asking for an inspection report from carrier.
Include the name of carrier representative and
the date the inspection was requested. Retain
inspection report and receipt for filing of a claim.

Concealed Damage

This must be reported to the carrier within fifteen
days. Obtain inspection report from the carrier.
Retain the inspection report for filing the claim.

DO NOT RETURN DAMAGED MERCHANDISE TO
THE MANUFACTURER – FILE THE CLAIM WITH THE
CARRIER.

Undercounter 8SBARE Beverage Specifications

Dimensions WxHxD (in.) 297/8 x 34 x 241/4
Weight 170 lbs.
Temperature 40–65°F
Power Supply 115V

supplied with a 15 amp plug

IT IS IMPORTANT THAT YOU SEND IN
YOUR WARRANTY RECORD CARD
IMMEDIATELY AFTER TAKING DELIVERY
OF YOUR REFRIGERATION APPLIANCE.

INSTALLATION

Select Location

The proper location will ensure peak performance
of your appliance. Choose a location where the
unit will be out of direct sunlight and away from
heat sources. Best performance will be maintained
when installed within the following parameters:

Ideal Ambient Temperature Range

Built-in 65°– 80°F
Free-Standing 65°– 90°F

Cabinet Clearance

Ventilation is required from the bottom front section
of the unit. Keep this area open and clear of any
obstructions.

figure 2

figure 1

Electrical Connection

Use nominal 115 volt, 60 cycle AC only. DO NOT
USE AN EXTENSION CORD.

Grounding Method

This product is factory equipped with a power
supply cord that has a three-pronged, grounded
plug. It must be plugged into a mating grounding
type receptacle in accordance with the National
Electrical Code and applicable local codes and
ordinances (see figure 1). If the circuit does not
have a grounding type receptacle, it is the
responsibility and obligation of the customer to
exchange the existing receptacle in accordance
with the National Electrical Code and applicable
local codes and ordinances. The third ground
prong should not, under any circumstances, be cut
or removed. (See figure 2) All U.L. listed
refrigerated products are equipped with this type of
plug.

3