24” Marvel
Refrigerated Drawers
Model # ML24RD****
Certied to meet
ENERGY STAR® requirements
• Dynamic Cooling Technology™ delivers rapid cooldown and
the industr y’s best temperature stability
• Specially designed for a truly ush t with adjoining
cabinetry
• MARVEL Intuit™ Integrated Controls provide precise
temperature management from 34°F to 42°F
• Pristine arctic white interior easily wipes clean and efcient
white LED lighting illuminates interior for better viewing
• Insulated thermal-efcient cabinet ensures optimum
efciency and preservation
• Close Door Assist System™ gently and automatically closes
drawers
• Audible and visual alarms signal when drawer is left ajar to
protect food integrity and energy use
• Vacation/Sabbath mode conserves energy during times
when the unit is not in use and complies with Star-K
requirements
• Height adjustment up to 1” with leveling legs
• 4” black adjustable toe kick
• 1-year warranty
Storage Capacity
Up to (108) 12-oz cans
Product Dimensions
23⅞” W x 33¾” minimum H x 25⅝” D
(including handle)
Ordering Details
Solid Stainless Steel Drawer Front ML24RDS2NS
Solid Black Drawer Front, Black
Handles
Solid Panel Ready Drawer Front ML24RDP2NP
No panel installation kit required.
ML24RDS2NB
Finish/Door Options
Stainless Steel
Black
Wood Overlay
(Panel Ready)
Side
Front
Side
Forced
Air Fan
Evaporator
Plate
Return
Air Intake
PRODUCT
WEIGHT
130 lbs
(59 kg)
130 lbs
(59 kg)
211⁄2"
(54.6 cm)
"D"
"E"
"F"
"G"
"H"
1"
(2.5 cm)
PRODUCT DIMENSIONS
Figure 8
"B"
"A"
"C"
Cabinet Dimensions
"D" "E" "F"
23 7⁄8”
(60.7 cm)
“G” “H”
25 21⁄32”
(65.2 cm)
33 3⁄4” to 34 3⁄4”
(85.7 to 88.3 cm)
39 5⁄ 32”
(99.5 cm)
23 23⁄ 32”
(60.2 cm)
24" Rough-In Dimensions
"A" "B" "C"
24”
(61 cm)
**34" to 35"
(86.4 to 88.9 cm)
24”
(61 cm)
Dynamic Cooling Technology™
delivers rapid cool down
and the industry’s best
temperature stability
The distinctive Marvel design features a
thermal-efcient cabinet and door combined
with Dynamic Cooling Technology™ for
superior temperature stability, faster cooling
times and speedy temperature recovery even
with high frequency.
Width 23 ⅞"
Interior Finish White
Capacity Up to 108 12-oz cans
Shelving System NA
Shelf Fronts NA
Other Storage NA
Interior Lighting 1 White LED Pod per drawer
Toe Grill Finish Black
Hinge NA
Handle Designer
Control Type Intuit™
Temperature Range 34° - 42° F
Lock NA
Electrical Requirements 120V / 60Hz / 15A
Length of Power Cord 5'
Product Dimensions 23 ⅞" W x 33 ¾" H x 21 ½" D
Depth to Front of Door 23
Depth to Handle 25
Depth with door at 90° 29
Shipping Weight 160 lbs
Finishes SS, B, O
Vacation /
Sabbath Mode
Agency Approvals CSA
ENERGY STAR
Certied
23
/32"
21
/32"
5
/32"
Finishes Key
SS = Stainless Steel
Yes
B = Black
O = Overlay
Overlay Panels
edges. (See Figure 15 below). The custom overlay
panel should be ush with the top of the drawer and
centered on the width of the drawer. Clamp panel in
position and mark pilot hole locations. Pick the required
pilot hole size from "Table B" below and drill the pilot
holes ensuring not to drill all the way through the over-
lay panel.
Material Type #8 Wood Screw
Hardwood
1
⁄8 Diameter Pilot Hole
Softwood
7
⁄64 Diameter Pilot Hole
are fully inserted.
Step 3: Attach the Overlay Panel to the Drawer
1. Set the overlay panel on drawer front face and align
edges. (See Figure 15 below). The custom overlay
panel should be ush with the top of the drawer and
centered on the width of the drawer. Clamp panel in
position and mark pilot hole locations. Pick the required
pilot hole size from "Table B" below and drill the pilot
holes ensuring not to drill all the way through the over-
lay panel.
Table B: Pilot Hole Drill Sizes for Wood Screws
position and mark pilot hole locations. Pick the required
lay panel.
OVERLAY DRAWER PANEL INSTALLATION
Step 3: Attach the Overlay Panel to the Drawer
1. Set the overlay panel on drawer front face and align
edges. (See Figure 15 below). The custom overlay
panel should be ush with the top of the drawer and
centered on the width of the drawer. Clamp panel in
position and mark pilot hole locations. Pick the required
pilot hole size from "Table B" below and drill the pilot
holes ensuring not to drill all the way through the over-
lay panel.
Table B: Pilot Hole Drill Sizes for Wood Screws
Material Type #8 Wood Screw
Hardwood
1
⁄8 Diameter Pilot Hole
Softwood
7
⁄64 Diameter Pilot Hole
2. Insert wood screws through clearance holes and
tighten to secure overlay panel.
3. Reinstall gasket into channel. Make sure the corners
are fully inserted.
Cut the overlay panel to the dimensions shown below in
Figure 14. On the top drawer only drill the 2 counter-bored
holes which are clearance for screw heads on the face of
the top drawer.
This is also a convenient time to locate and drill the holes
for your handle. Most often the handle is to match that of
the surrounding cabinetry. If your handle attaches from the
back-side of the custom panel, locate the mounting holes
while the panel is attached to the drawer and cabinet. After
the panel is removed from the drawer, drill the mounting
holes from the front, to the recommended diameter of the
handle manufacturer. Counter bore the back-side of the
panel so the screw heads do not interfere with the surface
of the drawer.
Step 2: Size the Overlay Panel
Panel thickness
Figure 13
.35/.31
(9 mm/7.5 mm)
.50
(12.5)
OVERLAY DRAWER PANEL INSTALLATION
Step 3: Attach the Overlay Panel to the Drawer
1. Set the overlay panel on drawer front face and align
edges. (See Figure 15 below). The custom overlay
panel should be ush with the top of the drawer and
centered on the width of the drawer. Clamp panel in
position and mark pilot hole locations. Pick the required
pilot hole size from "Table B" below and drill the pilot
holes ensuring not to drill all the way through the over-
lay panel.
Table B: Pilot Hole Drill Sizes for Wood Screws
Material Type #8 Wood Screw
Hardwood
1
⁄8 Diameter Pilot Hole
Softwood
7
⁄64 Diameter Pilot Hole
2. Insert wood screws through clearance holes and
tighten to secure overlay panel.
3. Reinstall gasket into channel. Make sure the corners
are fully inserted.
of the drawer.
Step 2: Size the Overlay Panel
Figure 13
.35/.31
(9 mm/7.5 mm)
.50
(12.5)
OVERLAY DRAWER PANEL INSTALLATION
2
(60 mm)
1429⁄32"
(379 mm)
233⁄4"
3
⁄8"
(603 mm)
19"
(483 mm)
1"(25 mm) diameter counter
bore
2 places, top drawer only.
3
1
⁄16" (30 mm)
1
⁄4" (6 mm) deep
Figure 14
Face of
Overlay Panel
(This side facing interior)
Cut the overlay panel to the dimensions shown below in
Figure 14. On the top drawer only drill the 2 counter-bored
holes which are clearance for screw heads on the face of
the top drawer.
This is also a convenient time to locate and drill the holes
for your handle. Most often the handle is to match that of
the surrounding cabinetry. If your handle attaches from the
back-side of the custom panel, locate the mounting holes
while the panel is attached to the drawer and cabinet. After
the panel is removed from the drawer, drill the mounting
holes from the front, to the recommended diameter of the
handle manufacturer. Counter bore the back-side of the
panel so the screw heads do not interfere with the surface
edges. (See Figure 15 below). The custom overlay
panel should be ush with the top of the drawer and
centered on the width of the drawer. Clamp panel in
pilot hole size from "Table B" below and drill the pilot
holes ensuring not to drill all the way through the over-
tighten to secure overlay panel.
Reinstall gasket into channel. Make sure the corners
Be sure that drawer sits evenly on both slides and clips
slide into place in rear of drawer.
Re-install wire harness at rear corner of top drawer.
Re-install two screws through drawer into slides.
Material Type #8 Wood Screw
Hardwood
Softwood
1
⁄8 Diameter Pilot Hole
7
⁄64 Diameter Pilot Hole
Figure 15
For comprehensive installation instructions,
please visit www.marvelrefrigeration.com
Screw clearance
hole through
gasket extrusion
Figure 15a
Overlay panel
ush with top
edge of drawer
Custom overlay
panel to be centered on width of
drawer.
Using clearance holes in
gasket channel mark
hole locations onto panel
Loading...