Martin Universal Design Indigo Mobile Taboret User Manual

Martin/F. Weber Co. • 4444 Lawton Avenue, Detroit, MI 48208 USA
Tel:[phone] • Fax:[phone] • E-mail:[e-mail]
www.MartinUniversalDesign.com • www.weberart.com • Made in China

Page 1

Nov 07 RPI

Assembly Instructions - Page 2

Remove contents of carton. Remove plastic wrap from product and discard.

Remove Twist ties from product to seperate into the following parts

[2 each]

Sides

STEP 1.

Take the two sides and insert two castors into
each sides legs.

PLEASE NOTE: You will need to use firm
pressure to the castor when inserting castors into
bottom of legs. Make sure the castors are in all
the way before continuing on.

See FIG 1.

[4 each]

Shelves

[4 each]

Castors

Nov 07 RPI

FIG 1.

Page 2

Assembly Instructions - Page 3

STEP 2.

Placing the [4] shelves into
position.

NOTE: This step is best
assembled with the help of
another person.

Have one person hold onto
both sides of the Mobile
Taboret while the other
person places the shelves
into position.
Each shelf has two lower “L”
Hooks that must fit over the
bottom (3rd) wire row, while
the [2] top wire ends need to
be positioned on the top (1st)
wire row. See illustration 1
and FIG 2.

Side of Taboret

1st wire row

2nd wire row

3rd wire row

ILLUSTRATION 1

WIRE END

These shelves snap easily
into place.

REPEAT with all 3 remaining
shelves.

1st wire row

2nd wire row

3rd wire row

FIG 2

Nov 07 RPI

“L” HOOK

Page 3

STEP 3.

Your Indigo Mobile Taboret
should now look like the
illustration to the right.

This Mobile Taboret can be
used in the Laundry Room,
Kitchen, art studio,
for hobbies and so much
MORE!

Assembly Instructions - Page 4

Nov 07 RPI

Martin/F. Weber Co. • 4444 Lawton Avenue, Detroit, MI 48208 USA
Tel:[phone] • Fax:[phone] • E-mail:[e-mail]
www.MartinUniversalDesign.com • www.weberart.com • Made in China

Page 4