Martin Universal Design 92-20411 User Manual

Model No. 92-20411 (white) and 92-20414 (black)

ITEM # PART NUMBER DESCRIPTION QTY.

1 .................. 97-01E10104 .............. Left Leg (Black) ....................................... 1

1 .................. 97-01E10101 .............. Left Leg (White) ....................................... 1

2 .................. 97-01E10204 .............. Right Leg (Black) .................................... 1

2 .................. 97-01E10201 .............. Right Leg (White) .................................... 1

3 .................. 97-01E10300 .............. Joiner ....................................................... 1

4 .................. 97-01E10404 .............. Lower Front Support (Black) ................. 1

4 .................. 97-01E10401 .............. Lower Front Support (White) ................. 1

5 .................. 97-01E10500 .............. Lower Back Joiner .................................. 1

6 .................. 97-01E20600 .............. LowerTilt Support Bar ............................ 1

7 .................. 97-01E10700 .............. Allen Screw ............................................. 6

8 .................. 97-01E20800 .............. Tray Support ........................................... 2

9 .................. 97-01E20904 .............. Top Center Arm (Black) .......................... 1

9 .................. 97-01E20901 .............. Top Center Arm (White).......................... 1

10 ................ 97-01E10700 .............. (SEE #7) ................................................... -

11 ................ 97-01E10700 .............. (SEE #7) ................................................... -

12 ................ 97-01E21204 ..............Tray (Black) ............................................. 1

12 ................ 97-01E21201 ..............Tray (White) ............................................. 1

13 ................ 97-01E21300 .............. Top Center Tube ..................................... 1

14 ................ 97-01E11104 ..............Top Canvas Holder (Black) .................... 1

14 ................ 97-01E11101 .............. Top Canvas Holder (White) .................... 1

15 ................ 97-01E21504 .............. Upper Tilt Support (Black) ..................... 1

15 ................ 97-01E21501 .............. Upper Tilt Support (White) ..................... 1

16 ................ 97-01E11200 .............. Knob Large Male ..................................... 3

17 ................ 97-01E11300 .............. Knob Small Male ..................................... 2

18 ................ 97-01E21800 .............. Allen Screw W/Nut/W M10 ...................... 1

19 ................ 97-01E11400 .............. Adjustable Feet ....................................... 4

20 ................ 97-01E22000 ..............Tray Screw............................................... 2

MINI TRAY - Model No. 92-2040/11 White • Model No. 92-2040/14 Black

Parts List

1 .................. 97-01ET0104 .............. Tray (Black) ............................................. 1

1 .................. 97-01ET0101 .............. Tray (White) ............................................. 1

3 .................. 97-01ET0200 ..............Chrome Leg ............................................. 1

IMPORTANT

If you have difficulty assembling your easel or need customer service assis-

tance. Please call: Martin Universal Design, Inc. Customer Service Hot Line at

1-800-366-7337. If you need additional parts, it is not necessary to contact your

dealer, our Customer Service Rep. will forward them to you immediately.

4444 Lawton Avenue, Detroit MI 48208 USA Tel:[phone] • Fax:[phone]
E-mail: [e-mail] • Visit us at: www.MartinUniversalDesign.com

pg 1

Assembly Instructions

FIGURE A.

Thread part #3 Joiner into part #4 Lower front support.
Put part #5 Lower back joiner into part #6 Lower tilt support
bar and then place part #15 Upper tilt support over the tube
of part #6 Lower tilt support bar.
Screw part #17 Small knob into part #15 Upper tilt support.
Insert part #1 Left Leg into end of #5 Lower back joiner and
into part #3 Joiner. Repeat with right side. Insert part #2
Right leg into end of #5 Lower back joiner and into part #3
Joiner.
Secure part #1 and #2 to part #4 Lower front support using
two #7 Allen screws. Tighten with Allen wrench.

FIGURE B.

FIG B

Insert part # 8 Tray support arms into part #4 Lower front
support. Secure with #10 Allen screws into part #4 lower
front support. Tighten by using Allen wrench.

FIG A

Proceed by sliding part #12 Tray down over parts #8.
Secure by screwing #16 Large knobs into part #12.

Then slide #9 Top support over the top of #8 and attach #15
Upper tilt support to #9 Top support with #18 Allen screw
with nut. Then screw #11 Allen screws into #9 Top support
to hold in place.

FIGURE C.

Insert #13 Top center tube through part #14 Top Canvas
holder and then tighten with #16 Large knob.
Then slide #13 and #14 assembled piece down into #9
Top support. To raise or lower, loosen knob and adjust to
preferred height. Re-tighten knob to secure.
NOTE: DO NOT tighten knobs more than necessary.

Your easel is now ready for use. Enjoy!

4444 Lawton Avenue, Detroit MI 48208 USA Tel:[phone] • Fax:[phone]
E-mail: [e-mail] • Visit us at: www.MartinUniversalDesign.com

pg 2