MartinLogan XTC8, XTC8-HT, XTW6, XTW5-LCR, XTW6-LCR Specification Sheet
Folded Motion® In-Wall and In-Ceiling Speakers
XTC8, XTC8-HT, XTW6
XTW5-LCR, XTW6-LCR
Motion® XT CI Front, Center, and Surround Speakers
The MartinLogan Motion XT CI series takes performance to the next level
over Motion CI. The Folded Motion XT tweeter gives each model in the Motion XT series
even more of the clarity, output and efficiency that the standard size FMT is famous for. With
Motion XT, we wanted to increase all aspects of performance over the Motion series, so
we didn’t just stop at the tweeter. All Motion XT models feature woven Kevlar woofers for
increased rigidity and lightness as well as a special Nomex layer on the back side of the
woofer material which increases clarity and realism by reducing resonance and ringing.
In addition to the larger tweeter, and lighter, stronger woofers, MartinLogan’s design and
engineering team has fitted the Motion XT series with a more substantial chassis to strengthen
the speaker and provide a more accurate sound, similar to a better cabinet on a traditional
speaker. The Nomex layer and the chassis are not something you can see after installation,
but it matters to the performance of the speaker, so it matters to us. With Motion XT CI, the
difference is in the details.
Frequency Response
51 - 25,000 Hz ±3dB
Tweeter Controlled Dispersion
30 x 80 degrees
Sensitivity (anechoic)
91dB @2.83V/ 1 meter
Impedance
4 ohms. Compatible
with 8 ohms
Crossover Frequency
2,270 Hz
Crossover Type
2 way
Driver Configuration
1 x 1.27” x 2.75” FMT,
1 x 8” Woofers
High Frequency Driver
FMT Transducer
1.27” x 2.4”
(3.22cm x 6.09cm)
Opening
4.5” x 2.75”
(11.43cm x 6.98cm)
Diaphragm
Woofer Specifications
One 8” (20.32 cm) cast
aluminum basket, black
Kevlar with Nomex backer
cone, Open back chamber
format. Concave dust cap.
Connectors
Push style
Components
Custom air core coil
inductors, polypropylene film
capacitors in series and low
DF electrolytic capacitors
FMT thermal/current
protection.
Cabinet Material
Black w/ White
Paintable Grill
Suggested Amplifier Power
Range 50–300 Watts
Maximum Power Handling
150 Watts
Weight
1.2 lbs. (0.5 kg) each
Overall Size (dia. x depth)
10.35” x 5.30”
(26.30 x 13.46cm)
Required Opening
9.25” (9.5cm) diameter
Projection From Wall
0.33” (23.5cm)
Depth Required Behind Wall
5.50” (13.97cm)
Specifications are subject to change without notice.
Frequency Response
51 - 25,000 Hz ±3dB
Tweeter Controlled Dispersion
30 x 80 degrees
Sensitivity (anechoic)
91dB @2.83V/ 1 meter
Impedance
4 ohms. Compatible
with 8 ohms
Crossover Frequency
2,000 Hz
Crossover Type
2 way
Driver Configuration
1 x 1.27” x 2.75” FMT,
1 x 8” Woofers
High Frequency Driver
FMT Transducer
1.27” x 2.4”
(3.22cm x 6.09cm)
Opening
4.5” x 2.75”
(11.43cm x 6.98cm)
Diaphragm
Woofer Specifications
One 8” (20.32 cm) cast
aluminum basket, black Kevlar
with Nomex backer cone,
Open back chamber format.
Concave dust cap.
Connectors
Push style
Components
Custom air core coil
inductors, polypropylene film
capacitors in series and low
DF electrolytic capacitors
FMT thermal/current
protection.
Cabinet Material
Black w/ White
Paintable Grill
Suggested Amplifier Power
Range 50–300 Watts
Maximum Power Handling
150 Watts
Weight
5.3 lbs. (2.4 kg) each
Overall Size (dia. x depth)
12.68” x 7.15”
(32.2 x 18.14cm)
Required Opening
11.5” (29.1cm) diameter
Projection From Wall
0.26” (0.65cm)
Depth Required Behind Wall
7.03” (17.84cm)
Motion® XT CI Front, Center, and Surround Speakers
Frequency Response
56 - 25,000 Hz ±3dB
Tweeter Controlled Dispersion
80 x 30 degrees
Sensitivity (anechoic)
91dB @2.83V/ 1 meter
Impedance
4 ohms. Compatible
with 8 ohms
Crossover Frequency
2,46 0 H z
Crossover Type
2 way
Driver Configuration
1 x 1.27” x 2.75” FMT,
1 x 6.5” Woofers
High Frequency Driver
FMT Transducer
1.27” x 2.4”
(3.22cm x 6.09cm)
Opening
4.5” x 2.75”
(11.43cm x 6.98cm)
Diaphragm
Woofer Specifications
One 6.5” (16.51 cm) cast
aluminum basket, black Kevlar
with Nomex backer cone,
Open back chamber format.
Concave dust cap.
Connectors
Push style
Components
Custom air core coil
inductors, polyester film
capacitors in series and low
DF electrolytic capacitors
FMT thermal/current
protection.
Cabinet Material
Black w/ White
Paintable Grill
Suggested Amplifier Power
Range 50–200 Watts
Maximum Power Handling
100 Watts
Weight
1.2 lbs. (0.5 kg) each
Overall Size (l x w x depth)
11.06” x 8.03” x 3.55”
(28.1 x 20.4 x 9.02cm)
Required Opening
7” x 10.13” (17.9 x 25.9cm)
Projection From Wall
0.31” (0.79cm)
Depth Required Behind Wall
3.43” (8.72cm)
Frequency Response
61 - 25,000 Hz ±3dB
Tweeter Controlled Dispersion
80 x 30 degrees
Sensitivity (anechoic)
92dB @2.83V/ 1 meter
Impedance
4 ohms. Compatible
with 8 ohms
Crossover Frequency
2,180 Hz
Crossover Type
2 way
Driver Configuration
1 x 1.27” x 2.75” FMT,
2 x 5.25” Woofers
High Frequency Driver
FMT Transducer
1.27” x 2.4”
(3.22cm x 6.09cm)
Opening
4.5” x 2.75”
(11.43cm x 6.98cm)
Diaphragm
Woofer Specifications
Two 5.25” (13.33 cm) cast
aluminum basket, black Kevlar
with Nomex backer cone,
Open back chamber format.
Concave dust cap.
Connectors
Push style
Components
Custom air core coil
inductors, polyester film
capacitors in series and low
DF electrolytic capacitors
FMT thermal/current
protection.
Cabinet Material
Black w/ White
Paintable Grill
Suggested Amplifier Power
Range 50–250 Watts
Maximum Power Handling
125 Watts
Weight
4.4 lbs. (2 kg) each
Overall Size (l x w x depth)
7.87” x 15.79” x 3.32”
(20 x 40.1 x 8.43cm)
Required Opening
14.5” x 6.5”
(36.8 x 16.5cm)
Projection From Wall
0.12” (0.3cm)
Depth Required Behind Wall
3.20” (8.13cm)
Frequency Response
44 - 25,000 Hz ±3dB
Tweeter Controlled Dispersion
80 x 30 degrees
Sensitivity (anechoic)
93dB @2.83V/ 1 meter
Impedance
4 ohms. Compatible
with 8 ohms
Crossover Frequency
260, 2470 Hz
Crossover Type
3 way
Driver Configuration
1 x 1.27” x 2.75” FMT,
1 x 6.5” midrange,
2 x 6.5” Woofers
High Frequency Driver
FMT Transducer
1.27” x 2.4”
(3.22cm x 6.09cm)
Opening
4.5” x 2.75”
(11.43cm x 6.98cm)
Diaphragm
Woofer Specifications
Two 6.5” (16.51 cm) cast aluminum
basket, black Kevlar with Nomex
backer cone, Open back chamber
format. Concave dust cap.
Midrange Specifications
One 6.5” (16.51 cm) cast aluminum
basket, black Kevlar with Nomex
backer cone, Sealed back chamber
format. Concave dust cap.
Connectors
Push style
Components
Custom air core coil inductors,
polyester film capacitors in series
and low DF electrolytic capacitors
FMT thermal/current protection.
Cabinet Material
Black w/ White
Paintable Grill
Suggested Amplifier Power
Range 50–300 Watts
Maximum Power Handling
150 Watts
Weight
3.5 lbs. each (1.6 kg)
Overall Size (l x w x depth)
28” x 7.69” x 3.67”
(71.12 x 19.5 x 9.31cm)
Required Opening
6.64” x 27”
(16.9 x 68.5cm)
Projection From Wall
0.13” (0.32cm)
Depth Required Behind Wall
3.54” (8.99cm)
Loading...