EM-ESL X
Electrostatic Speaker
SPECIFICATIONS
System Frequency Response
41–22,000 Hz ±3 dB
Recommended Amplifier Power
20–400 Watts per channel
Dispersion
Horizontal: 30 degrees
Vertical: 40” (101.6 cm) line source
Sensitivity
91 dB / 2.83 volts / meter
Impedance
6 ohms (1.6 ohms @ 20 kHz min.). Compatible with
4, 6, or 8 ohm rated amplifiers
Crossover Frequency
400 Hz
High-Frequency Driver
XStat™ CLS™ Electrostatic transducer
Panel dimensions: 40” x 8.6” (101.6 cm x 21.8 cm)
Radiating area: 344 in
Woofers
Two 8” (20.3 cm) high excursion, high-rigidity
paper cones with extended throw driver assembly,
non-resonance asymmetrical chamber format, bass reflex
Components
Custom-wound audio transformer, air core coils,
large steel laminate inductors, polyester capacitors,
and low DF electrolytic capacitors
Weight
52 lbs. each (23.6 kg)
Size (H x W x D)
59.2” x 9.4” x 20.7” (150.3 cm x 23.8 cm x 52.6 cm)
2
(2,215 cm2)
Specifications are subject to change without notice.
The ElectroMotion ESL X is an introduction to a new world of
high performance audio. Highly efficient, with superbly integrated
bass performance, the EM-ESL X will perform admirably with AV
receivers as well as high-end amplifiers.
Equipped with a larger XStat™ electrostatic transducer than the EM-ESL, the EM-ESL X has
a radiating area over 50in
surprisingly small, non-resonant asymmetrical bass reflex ported chamber. Dual audiophilegrade, doped-fiber cone woofers, custom designed by MartinLogan’s in-house design and
engineering team, optimize cone suspension and the magnetic flux field to produce big
bass output with vanishingly low distortion.
The specially developed ElectroMotion XStat MicroPerf electrostatic panel is housed using
AirFrame™ Technology. AirFrame technology, a composite of aluminum and composite
materials, keeps the electrostatic panel rigid without obstructing playable surface area or
interfering with ambience-enriching dipole sound radiation.
2
larger. Twin 8-inch high-excursion woofers are housed in a
EM-ESL X Electrostatic Speaker