Martin Audio Blackline H3H+ Specifications

Blackline H3H

+

Three-way bi-amp trapezoid Hybrid™
fully horn loaded

features

 All-horn three-way system
 ‘Phase-ball’ loaded mid-driver
 Hybrid™ LF section
 Fitted with handles and castors
 Horizontal format for low profile installs
 Five year limited warranty

applications

 Larger club performance
 Large scale installs

Century Point, Halifax Road, Cressex Business Park,
High Wycombe, Buckinghamshire HP12 3SL, England.
Telephone: [phone] Facsimile: [phone]
E-mail: [e-mail]
All information is Copyright © 2007 Martin Audio Ltd.

The Blackline H3H+is a very high performance, all-horn, three­way system in a single, horizontally formatted, wide-bandwidth
package. New drivers have been developed for improved
performance in all bands. The Hybrid™ low frequency section
comprises a horn-loaded 15” (380mm)/4” (100mm) voice coil
driver that is reflex loaded to extend the LF output to below the
natural cut-off point of the horn. The new LF driver features a
water resistant cone and triple roll surround for increased
excursion.

The mid-horn of the H3H+has a unique ‘phase-ball’ loading
device which maintains the constant directivity characteristics of
the horn at the upper end of its range. It is driven by a new 10”
(250mm) midrange driver with an aluminium demodulating ring for
improved high-mid clarity and reduced distortion when driven
hard. The 70˚ x 40˚ HF section of the H3H+features a
neodymium 1” (25mm) exit compression driver with a Kapton
diaphragm for high sensitivity and extended HF performance. The
internal mid/high passive crossover allows this three-way system
to be driven in a bi-amp configuration.

A Martin Audio M3+or DX1 Electronic Controller is available to
provide H3H+crossover and limiter facilities.

www.martin-audio.com

overall dimensions

technical specifications

TYPE Three-way bi-amp trapezoid Hybrid™

fully horn loaded
FREQUENCY RESPONSE (5) 50Hz-18kHz ± 3dB
DRIVERS 15” (380mm)/4” (100mm) voice coil bass driver

10” (250mm)/2.5” (63.5mm) voice coil mid driver

1” (25mm) exit HF compression driver
RATED POWER (2) LF: 750W AES, 3000W peak

MF + HF: 300W AES, 1200W peak
RECOMMENDED AMPLIFIER LF: 400-1500W into 4 ohms

MF + HF: 400-800W into 4 ohms
SENSITIVITY (6) LF: 104dB, MF + HF: 104dB
MAXIMUM SPL (7) 131dB continuous, 137dB peak
NOMINAL IMPEDANCE LF: 8 ohms, MF + HF: 8 ohms
DISPERSION (-6dB) 70˚ horizontal, 40˚ vertical
CROSSOVER 200Hz active, 2kHz passive
ENCLOSURE 250 litre, multi-laminate birch ply
FINISH Textured black paint
PROTECTIVE GRILLE Black perforated steel
CONNECTORS 2 x Neutrik NL4
PIN CONNECTIONS LF+,- : 1+,1-

(MF + HF) +,- : 2+,2­FITTINGS 12 x M10 inserts

4 x 4” (100mm) castors

4 x pocket handles
DIMENSIONS (inc wheels) (W) 1066mm x (H) 560mm x (D) 780mm (911mm)

(W) 42ins x (H) 22ins x (D) 30.7ins (35.9ins)
WEIGHT 77.5kg (170.5lbs)

professional