Martin Archery Jaguar Take User Manual

Page 1
Jaguar Take-Down
OWNERS MANUAL
If you have additional questions please call customer service at 509-529-2554
Martin Archery
3134 W. Highway 12, Walla Walla, WA 99362 USA www.martinarchery.com
Page 2
TAKE-DOWN LIMB INSTALLATION
Your Take-Down model is designed to be shot with the limbs mounted securely
Overtightening can cause limb damage. The draw weight is not adjustable on Take-Down model recurve bows.
STRINGING YOUR BOW
Martin Archery recommends that you use a bowstringer when stringing your bow. Proper use of a bowstringer will prevent your bow’s limbs from becoming twisted. A bowstringer also provides the safest method of stringing your bow as the limb tips are away from you during the stringing and unstringing process. (Avoid placing your head close to the limb tips when stringing and unstringing your bow).
ARROWS
All types of arrows (wood, aluminum, carbon) can be shot from your Martin (Howatt) bow. Regardless of arrow type, it is important that your arrows are correctly spined (have the correct spine stiffness) for your draw weight. Check your arrow manufacturers recommendations to determine the arrow size best suited for your bow.
BRACE HEIGHT (FISTMELE)
The brace height of your bow is measured from the pivot point, or most inward point of the grip, to the bowstring (see illustration, front page). The recommended brace height for the Jaguar Take-Down is 7" to 7 1/2". A higher brace height helps reduce bow vibration and noise and also minimizes the effects of shooting errors. A lower brace height provides increased arrow velocity.
Increased noise and poor arrow ight can be the result of a brace height that is too low.
Twisting your bowstring will reduce its length and increase your brace height. Untwisting your bowstring or installing a longer bowstring will decrease your brace height. (Avoid untwisting emish style bowstrings as string failure may occur). Experiment to
nd the brace height measurement that allows your bow to perform at its best with your
particular style of shooting.
LIMB STRAIGHTENING (BUMPING)
Should a limb become twisted, it will remain twisted until you straighten or ‘bump’ it back to the straight position. ‘Bumping’ involves the placement of one hand near the twisted section of the limb and the other hand on the riser section. A twisted limb can be straightened in this manner by applying pressure in the opposite direction of the twist. You should unstring your bow before straightening a twisted limb. Neglecting a twisted limb will only allow the twist to become more severe. A brief inspection of each limb should be made each time you string your bow.
Page 3
STRING LENGTH
Your bow’s AMO (Archery Manufacturer and Merchant’s Organization) length is marked on its lower limb. To achieve the correct brace height you will need to use a bowstring of the same AMO length. (Example: An AMO 62” bow requires an AMO 62” string). The actual length of your bowstring will be 3” shorter than its marked AMO length.
CARE AND SAFETY
You should unstring your bow when it is not being used.
Never ‘dry-re’ your bow.
This is shooting the bow without an arrow. A ‘dry-re’ can severely damage your
bow.
Never draw, aim or shoot unless you are sure that line of re is clear.
Remember: “Once an arrow is in ight, it cannot be recalled.”
Store your bow in a cool, dry place and avoid prolonged exposure to excessive
heat and moisture.
Occasionally waxing your bow with a quality furniture wax will help preserve its nish.
When cared for in this manner, your bow will provide you with many years of faithful service.
Page 4
LIMITED WARRANTY
Your Martin bow is guaranteed to be free from defects in materials and workmanship for a period of 1 (one) years from the date of purchase after which replacement or repairs will be made at a COST of 50% of the retail price then in effect for a period of 3 (three) years from the date of purchase.
Whether your new bow is for hunting, 3-D, or for shooting targets, you have made the right decision in choosing a MARTIN! Over forty years of archery experience are
built into every MARTIN bow. You can be condent that your new bow is designed
to provide years of faithful service and that MARTIN will always be around to back it with a rock-solid warranty!
This Limited Warranty is conditioned upon proof of purchase and other conditions listed below. IT IS IMPORTANT THAT YOUR SALES RECEIPT BE FILED IN A SAFE PLACE FOR FUTURE REFERENCE, AS WARRANTY REPAIRS WILL NOT BE PERFORMED UNDER WARRANTY WITHOUT A COPY OF THE DATED SALES RECEIPT. Martin Archery, Inc., Warrants that your Martin bow will perform its intended function if used in accordance with the instructions provided. This Limited Warranty covers ONLY the replacement parts, labor and return ground transportation costs performed by Martin Archery, Inc. to the consumer for the repaired bow. Transportation charges for the return of the bow to Martin Archery, Inc. are not covered. NO C.O.D.’s WILL BE ACCEPTED. MARTIN ARCHERY, INC. MAKES NO OTHER WARRANTY, WITHER EXPRESS OR IMPLIED, EITHER OF FITNESS OR OF MERCHANTABILITY, except as stated above. ANY SUCH ADDITIONAL WARRANTY IS EXPRESSLY DISCLAIMED.
Warranty Limitations are as follows:
If bow shows sign of misuse, alteration or mishandling, this warranty will be void.
Claimant must be original purchaser. THIS WARRANTY IS NOT TRANSFERABLE.
Returns to Martin Archery, Inc. must be pre-authorized. Owner must contact Martin Archery, Inc. at (509) 529-2554 prior to shipping in order to obtain a Return Authorization Number.
All accessory items must be removed from the bow prior to shipping. MARTIN ARCHERY, INC. WILL NOT BE RESPONSIBLE FOR DAMAGE OR LOSS OF ANY ACCESSORY ITEM LEFT ON THE BOW.
WARRANTY IS NOT EFFECTIVE UNLESS A COPY OF THE DATED SALES RECEIPT ACCOMPANIES THE BOW.
This warranty gives you specic legal rights. You may also have other rights
which vary from state to state.
Return bow to: MARTIN ARCHERY, 3134 W Highway 12, Walla Walla, WA 99362
This policy is subject to change and/or cancellation at any time at our discretion.
Loading...