Martin Rush Scanner 1 LED User Manual
G A L L E R Y
RUSH Scanner 1 LED
The RUSH Scanner 1 LED is designed to enable lighting designers to
boost the wow factor and energize crowds with high-
speed mid-air
looks in a variety of entertainment venues and nightclubs.
This fixture delivers high output via sharp optics and is packed with
eye-catching effects. With its high-speed pan and tilt capabilities, the
RUSH Scanner 1 LED is ideal for creating dramatic atmospheres and
boosting energy levels on cruise ships, in dance clubs and other
nightlife venues.
Compact size, low weight, rugged construction and long-
life LEDs
also make the RUSH Scanner 1 LED a favorite for rental companies
seeking to produce once-in-a-
lifetime memorable events through
powerful, dynamic lighting effects.
Powerful 90 W white LED engine
Breathtakingly fast pan and tilt
Rich, dynamic feature set including two color wheels, two gobo wheels and
rotating prism
F E A T U R E S
T E CHNI CA L S P E CI F I CA T I O NS
Physical
Dynamic Effects
Control and Programming
Optics
•
High
-power, long-life 90 W white LED engine
•
Effects include two gobo wheels. two color wheels and a 3-facet prism
•
Sharp projections with motorized focus
•
DMX control and standalone operation
•
Auto trig and music trig standalone modes
•
Compact size and rugged construction
Length: 588 mm (23.1 in.)
Width: 303 mm (11.9 in.)
Height: 193 mm (7.6 in.)
Weight: 9.6 kg 21.1 lbs.)
Color wheel 1: 8 colors plus open, rotation with variable direction and speed
Color wheel 2: 8 colors (incl. 1 x UV, 2 x CTC) plus open, rotation with variable
direction and speed
Rotating gobo wheel: 6 rotating/indexing gobos plus open
Fixed gobo wheel: 7 gobos plus open
Electronic 'shutter' effect: Strobe, pulse effects, instant open and blackout
Prism: Indexing and rotation with variable direction and speed
Focus: Motorized
Electronic dimming: 0 - 100%, four dimming curve options
Pan: 170°, coarse & fine control
Tilt:
75°, coarse & fine control
Control options: DMX, standalone, synchronized master/slave
DMX channels: 16
Standalone trigger options: Sound activation (music trig), auto trig
Standalone sequences: 9 pre-programmed shows
Standalone memory: 20 scenes
Music trig sensitivity: Adjustable
Setting and addressing: Control panel with backlit LCD display
DMX compliance: USITT DMX512/1990
©
2015 Martin Professional
Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice
Construction
Installation
Connections
Electrical
Typical Power and Current
Thermal
Approvals
Included Items
Accessories
Related Items
Ordering Information
Light source: 90 W LED engine
Minimum LED lifetime: 30 000 hours (to >70% luminous output)*
Rotating gobo size: 24 mm (0.94 in.)
Rotating gobo image size: 20 mm (0.79 in.)
*Figure obtained under manufacturer's test conditions:
Color: Black
Housing: High-impact flame-retardant thermoplastic
Protection rating: IP20
Mounting points: Adjustable bracket, surface or truss mount
Location: Indoor use only, must be fastened to surface or structure
Orientation: Any
AC power in/thru: Neutrik PowerCon
DMX data in/out: 3-pin and 5-pin locking XLR
AC power: 100-240 V nominal, 50/60 Hz
Power consumption: 168 W
Typical half-cycle RMS inrush current at 240 VAC: 10 A
Fuse: T 6.3 A
Power supply unit: Auto-ranging electronic switch mode
100 V, 60 Hz: 1.7 A, 170 W, PF 0.997
120 V, 60 Hz: 1.4 A, 165 W, PF 0.994
230 V, 50 Hz: 0.7 A, 162 W, PF 0.937
Figures obtained at nominal voltage. Figures are typical, not maximum, allow for +/- 10%
variation
Cooling: Forced air
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 0° C (32° F)
Total heat dissipation (calculated, +/- 10%, at full intensity): 570 BTU/hr.
EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
US safety: UL 1573
US EMC: FCC Part 15 Class B
Canadian safety: CSA C22.2 No. 166
Canadian EMC: ICES-003 Class A
Australia/NZ: RCM
Power cable, 6 A, 18 AWG, 0.75 mm2, UL- listed, H05VV-F, 1.5 m, without mains plug
Mounting bracket
Cables, 16 A, for connection to power in chains
Power input cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F,
with PowerCon input
connector, 3 m (9.8 ft.): P/N 11541508
Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F,
with PowerCon connectors,
1.4 m (4.6 ft.): P/N 11541509
Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors,
2.25 m (7.4 ft.): P/N 11541510
Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors,
3.25 m (10.7 ft.): P/N 11541511
Power connectors
Neutrik PowerCon NAC3FCA power input connector, cable mount, blue: P/N 05342804
Neutrik PowerCon NAC3FCB power output connector, cable mount, light grey: P/N
05342805
Installation hardware
Half-coupler rigging clamp: P/N 91602005
Safety cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
Safety cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007
RUSH™ Software Uploader 1: P/N 91611399
RUSH™ Scanner 1 LED in cardboard box: P/N 90480120
©
2015 Martin Professional
Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice
Loading...